You're viewing Latest Products
Showing all 32 results
R&G Aero Crash Protectors feature our stylish, aerodynamic Aero Bobbins and are available in Black. Suitable for the Aprilia RS660 '21- models. R&G Crash Protectors offer core motorcycle protection, keeping the frame, engine, fairing and other critical components off the ground in the event of a crash, drop or slide.
R&G Aero Bobbins are a stylish, aerodynamic, teardrop shaped bobbin improving on the original good looks of our highly successful and popular standard round bobbins. Fitted...
R&G Aero Crash Protectors feature our stylish, aerodynamic Aero Bobbins and are available in Black. Suitable for the Aprilia RS660 '21- (Drill Kit) models. R&G Crash Protectors offer core motorcycle protection, keeping the frame, engine, fairing and other critical components off the ground in the event of a crash, drop or slide.
R&G Aero Bobbins are a stylish, aerodynamic, teardrop shaped bobbin improving on the original good looks of our highly successful and popular standard round bo...
Single point mount (open-ended) hand & lever guard.
Adjustable fit with multiple side positions.
Low profile minimalist design with venting for increased airflow.
Impact-resistant plastic guards providing protection for controls & cables.
Clamp manufactured from lightweight, high strength nylon and aluminium.
NOTE: This Single Point Mount product is not designed for impact protection.
MTB Deflector and Plug Set.
Can be fitted to the top and/or bottom of MTB handguard (Code: BB-MTB-001-00 – sold separately).
Easy installation.
Can be removed in minutes for a more compact feel.
Deflectors provide maximum coverage from trail debris and harsh environments.
Deflector & Plug Set available in an extensive range of colours.
Includes 4 deflectors, 4 plugs and 8 mounting screws.
MTB Plastic Guard Replacement Set (guards only). NO mounting hardware.
Left/Right Pair.
Impact Resistant Plastic Guards.
Large range of colours.
MTB Clamp Set.
Easy installation.
Clamp frame manufactured from lightweight, high strength nylon.
Clamp saddle manufactured from aluminium (anodised black).
Handlebar clamp kit only (no plastic guards).
MTB Screw Kit.
For mounting MTB deflectors & plugs.
Set of 8.
Spare Part – MTB Plug Set.
For fitting MTB deflectors to MTB handguard sold separately.
Easy installation.
Plug Set available in an extensive range of colours.
Includes 4 plugs.
Mounting screws sold separately
Radically tidy up the rear end of the Tail Tidy for Honda CB650R '21 - / CBR650R ’21-.
R&G tail tidy unit is easy to fit and will radically transform the rear end of the bike, removing the expansive (and often ugly!) OEM licence plate holders - replacing them with a much sleeker looking unit.
Radically tidy up the rear end of the Tail Tidy for Aprilia RS660 '21-.
R&G tail tidy unit is easy to fit and will radically transform the rear end of the bike, removing the expansive (and often ugly!) OEM licence plate holders - replacing them with a much sleeker looking unit.
Radically tidy up the rear end of the Honda CMX500 Rebel (S) '20- with this R&G Tail Tidy.
This R&G Oil Cooler Guard for the Ohvale 110/160 models is available in a titanium powder coat finish for a long-lasting durable finish. Made from aluminium mesh encased in an aluminium frame, the neat design adds to the looks of the bike as well as keeping the radiator/oil cooler well protected from stones and road debris kicked up by the wheel or by other road users.
This R&G Engine Case Cover Kit is suitable for the Honda CB650R '21- & CBR650R '21- (Race Series) models.
This kit contains 2 covers;-
ECC0322R - LHS Case Cover
ECC02200BK - RHS Case Cover
Our industry leading engine case covers are now available in kit form containing all the engine case covers R&G offer for your bike in one go. Developed on track and brought to the road, R&G Engine Case Covers bring BSB and AMA race series approved levels of engine cover protection to...
Designed for the Aprilia RS660 '21- models, these Bar End Sliders will protect your expensive levers and clip-on from damage in the event of a drop, crash or slide.
R&G Bar End Sliders are easy to install and feature a simple but stylish design.
Our all-new version R&G Brake Lever Guard kit can be fitted to the brake side and has been specifically designed for the Ohvale 110/160 models.
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, MotoAmerica) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can eq...
Our R&G Brake Lever Guard kit can be fitted to the brake side and has been specifically designed for the Aprilia RS660 '21- models.
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, MotoAmerica) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be app...
This Carbon Fibre Lever Guard kit has been specifically designed for the Aprilia RS660 '21- models.
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting you...
Our R&G Brake Lever Guard kit can be fitted to the brake side and has been specifically designed for the Honda CB650R '21- models.
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, MotoAmerica) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be appl...
This Carbon Fibre Lever Guard kit has been specifically designed for the Honda CB650R '21- models.
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your...
These cotton reels mount directly into the mounting points on the rear swingarm offering the best of both worlds in terms of crash protection and functionality with the ability to use R&G cotton reels, which offer excellent crash protection to those components located towards the rear as well as the ability to lift up the rear of the bike with a paddock stand for maintenance and tyre changes.
Specially designed for the Ohvale 110/160, they are designed to be slightly smaller than a stan...
These Fork Protectors are suitable for the MV Agusta Brutale 1000RR '20- models. Easy to install, R&G Fork Protectors help eliminate damage to the front forks, fork bottoms and brake callipers in the event of a crash or drop.
These Front Spindle Sliders are easy to install and will help reduce damage to your bike in the event of a drop or crash. Unlike Fork Protectors, these Front Spindle Sliders also allow you to lift the front of the bike using a Front Paddock Stand for cleaning and maintenance.
This 2-piece Tank Traction Grip set has been specially designed for the Aprilia RS660 '21- models.
R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking.
...
This 2 piece R&G Tank Traction Grip kit has been specially designed for the Ohvale 110/160 models.
R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Tank Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and brak...
This 4-piece R&G Tank Traction Grip kit has been specially designed for the Moto Guzzi V85TT '19- models.
R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Tank Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering a...
This stylish R&G Exhaust Hanger has been specifically designed for the Honda CMX500 Rebel (S) '17- and not only reduces weight but also gives the bike a sportier, sleeker look. With a classy, black, powder-coated finish, it is made from sturdy, aircraft-grade aluminium and will retain its good looks for many years.
This R&G Exhaust Hanger kit comes with an Exhaust Hanger (EH0105BK) and Footrest Blanking Plate (BLP0089BK). Specially designed to fit and suit the Honda CMX500 Rebel (S) '17- models stylish contours. This kit allows removal of the pillion pegs on both sides for that aggressive race/street bike look, whilst also allowing for your exhaust to be properly supported with a stylish R&G Exhaust Hanger.
These stylish R&G Exhaust Hangers has been specifically designed for the MV Agusta Brutale 1000RR '20- and not only reduces weight but also gives the bike a sportier, sleeker look. With a classy, black, powder-coated finish, it is made from sturdy, aircraft-grade aluminium and will retain its good looks for many years.
This R&G Exhaust Hanger kit comes with 2x Exhaust Hanger (EH0104BK) and 2x Footrest Blanking Plate (BLP0101BK). Specially designed to fit and suit the MV Agusta Brutale 1000RR '20- models stylish contours. This kit allows removal of the pillion pegs on both sides for that aggressive race/street bike look, whilst also allowing for your exhaust to be properly supported with a stylish R&G Exhaust Hanger.
Whether you are transporting your bike to a track or down to your local mechanic for some work, make securing your bike a lot easier with the R&G Tie-Down Hook.
This pair of Tie-Down Hooks have been specially designed to fit the Aprilia RS660 '21-.
Never forget your sidestand puck again! Kickstand Shoes bolt onto the bottom of the sidestand, to enlarge the original’s footprint by up to 100%, significantly spreading the load placed upon it, to help prevent the stand ‘piercing’ the ground. Despite this enlargement, the Shoe does not affect ground clearance or interfere with the chain run during normal riding. Available for nearly 100 different bikes, covering popular adventure, sports, naked and touring machines, each Shoe is bespoke to the ...
Maximise your potential and fine tune your machine to your exact requirements, whether it is a lower more comfortable position, or a higher position giving more ground clearance for track, get the bike set up for you.
Suitable for the Kawasaki ZX-6R '19- models. Compatible for both 'Road' and 'Race' shift patterns. If you wish to use the race shift, it will be necessary to remove the front sprocket cover.