You're viewing Indicators and Adapters for All Bikes
Showing all 80 results
These R&G Rear Indicator Adapters are made to suit the MV Agusta Superveloce 800 '20-, Brutale 1000RR '20- & Oro '20- models and allow the use of R&G micro indicators (RG370/RG371/RG372) or other aftermarket (8mm) indicators as rear turn signals, getting rid of the often large OEM indicators and helping give your bike a more sporty and sleek look.
Please note: NO indicators included with this kit.
These R&G Indicator Adapters are made to suit the BMV Agusta Superveloce 800 '20-, Brutale 1000RR '20-, & Brutale Oro '20- models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Micro LED Indicators - Resistors (RGR0002) are needed to obtain a correct flash rate.
NO indicators included with this kit.
R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.
If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors.
In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0002 (see related products below) - in some cases more than one resister must be used inline.
Supplied as a pair
When using micro indicators, we recommend installing a set of R&G Indicator Adapters, which fill in gaps left by the removal of the original indicators.
These Indicator Adapters come as a set of 4 pieces to fit the Yamaha MT-03 '20- and can be used on both front and rear indicator mounting points.
All our indicators adapters are designed to be used in conjunction with R&G Micro Indicators with 8mm threads.
When using micro indicators, we recommend installing a set of R&G Indicator Adapters, which fill in gaps left by the removal of the original indicators.
These Indicator Adapters (IAS0018BK) come as a set of 4 pieces to suit the BMW F900 R/XR '20- and can be used on both front and rear indicator mounting points.
All our indicators adapters are designed to be used in conjunction with R&G Micro Indicators with 8mm threads (code RG370: bulb type, code RG371: LED type, code RG372:...
When using micro indicators for the BMW F900 R/ XR '20- you will need the R&G Indicator Adapter kit (IAS0018BK) which contains connectors and small rubber seals for one pair of indicators.
Resistors are not included!
*Please note that the LED Indicators DO NOT come with this kit*
When using micro indicators for the Super Soco TC Max '20- / CPx '20-, you will need this R&G Indicator Adapter kit which contains everything needed for one pair of indicators (front or rear).
This kit is suitable for the front or rear of the Super Soco TC Max '20- / CPx '20-.
When using micro indicators for the Moto Guzzi V85TT '19-, you will need this R&G Indicator Adapter kit which contains everything needed for one pair of indicators (front or rear).
This kit is suitable for the front or rear of the Moto Guzzi V85TT '19-.
When using micro indicators for the Moto Guzzi V85TT '19-, you will need this R&G Indicator Adapter kit which contains everything needed for two pairs of indicators (front and rear).
This kit is suitable for the front or rear of the Moto Guzzi V85TT '19-.
These R&G Rear Indicator Adapters are made to suit the Royal Enfield Interceptor 650 ’19- & Continental GT 650 ’19- model and allow the use of R&G micro indicators (RG370/RG371/RG372) or other aftermarket (8mm) indicators as rear turn signals, getting rid of the often large OEM indicators and helping give your bike a more sporty and sleek look.
Please note: NO indicators included with this kit.
These R&G Rear Indicator Adapters are made to suit the Kawasaki Ninja 1000SX ’20- models and allow the use of R&G micro indicators (RG370/RG371/RG372) or other aftermarket (8mm) indicators as rear turn signals, getting rid of the often large OEM indicators and helping give your bike a more sporty and sleek look.
Please note: NO indicators included with this kit.
When using micro indicators for the Zero FX '19-, SRF '19- and DSR '19- you will need the R&G Indicator Adapter kit (IA0016BK) which contains connectors and small rubber seals for one pair of indicators.
Resistors are not included!
*Please note that the LED Indicators DO NOT come with this kit*
These R&G Rear Indicator Adapters are made to suit the Yamaha T-Max 560 '20- models and allow the use of R&G micro indicators (RG370/RG371/RG372) or other aftermarket (8mm) indicators as rear turn signals, getting rid of the often large OEM indicators and helping give your bike a more sporty and sleek look.
Please note: NO indicators included with this kit.
These R&G Rear Indicator Adapters are made to suit the Indian FTR1200(S) '19- models and allow the use of R&G micro indicators (RG370/RG371/RG372) or another aftermarket (8mm) indicators as rear turn signals, getting rid of the often large OEM indicators and helping give your bike a more sporty and sleek look.
Please note: NO indicators included with this kit.
These R&G Rear Indicator Adapters are made to suit the Kawasaki ZX-25R '20- models and allow the use of R&G micro indicators (RG373/RG374) or other aftermarket (8mm) indicators as rear turn signals, getting rid of the often large OEM indicators and helping give your bike a more sporty and sleek look.
Please note: NO indicators included with this kit
Sold in PAIRS
These R&G Rear Indicator Adapters are made to suit the Honda CB650R '19- & CBR650R '19-'20 models and allow the use of R&G micro indicators (RG370/RG371/RG372) or another aftermarket (8mm) indicators as rear turn signals, getting rid of the often large OEM indicators and helping give your bike a more sporty and sleek look.
Please note: NO indicators included with this kit.
When using micro indicators for the Honda CRF1100L Africa Twin Adventure Sport and CRF1100L Africa Twin Standard Model '20- you will need the R&G Indicator Adapter kit (IA0014BK) which contains connectors and small rubber seals for one pair of indicators.
Resistors are not included!
*Please note that the LED Indicators DO NOT come with this kit*
When using micro indicators for the Triumph Speed Twin 1200 ’19- & Tiger 900 GT/ Rally '20- you will need the R&G Indicator Adapter kit (IA0015BK) which contains connectors and small rubber seals for one pair of indicators.
Resistors are not included!
*Please note that the LED Indicators DO NOT come with this kit*
These R&G Indicator Adapters are made to suit the Royal Enfield Interceptor 650 ’19- and Continental GT 650 ’19- models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Please note: NO indicators included with this kit.
These R&G Indicator Adapters are made to suit the BMW S1000XR '20- models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Micro LED Indicators - Resistors (RGR0002) are needed to obtain a correct flash rate.
NO indicators included with this kit.
These R&G Indicator Adapters are made to suit the Honda CBR650R '19- models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Micro LED Indicators - Resistors (RGR0002) are needed to obtain a correct flash rate.
NO indicators included with this kit.
When using micro indicators for the Yamaha YZF-R3 '19- & YZF-R25 '19- you will need the R&G Indicator Adapter kit (IA0008BK) which contains connectors and small rubber seals for one pair of indicators.
Resistors are not included!
*Please note that the LED Indicators DO NOT come with this kit*
When using micro indicators for the Honda CB500X '19- & CB400X '19- you will need the R&G Indicator Adapter kit (IA0008BK) which contains connectors and small rubber seals for one pair of indicators.
Resistors are not included!
*Please note that the LED Indicators DO NOT come with this kit*
When using micro indicators for the Kawaski Z900 '20- & Kawasaki ZH2 '20- you will need the R&G Indicator Adapter kit (IA0008BK) which contains connectors and small rubber seals for one pair of indicators.
Resistors are not included!
*Please note that the LED Indicators DO NOT come with this kit*
When using micro indicators for the KTM 690 SMC-R '19- you will need the R&G Indicator Adapter kit (IA0006BK) which contains connectors and small rubber seals for one pair of indicators.
Resistors are not included!
*Please note that the LED Indicators DO NOT come with this kit*
These R&G Indicator Adapters are made to suit the BMW F750GS '18- & F850GS '18- models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Please note: NO indicators included with this kit.
The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators for the following manufacturers: Honda, Kawasaki & Yamaha.
Please check the existing Indicator Relay where possible before ordering - if you are still unsure please ask your local dealer.
The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators for all Suzukis of model year 2001 onwards.
If the machine is from around the 2000-2002 period, please check before ordering, in case you need one of our other relays.
R&G Indicator Extenders are designed for micro indicators (8mm thread) and come in three different lengths: 65mm, 50mm and 35mm, to ensure legality in terms of separation distance of your indicators.
With some licence plates in some countries, with certain tail tidies, the indicator lenses can be partially hidden behind the licence plate. These extenders maximise safety and ensure legality, as you can choose the length of extender needed for optimum indicator positioning.
R&G Indicator Extenders are designed for micro indicators (8mm thread) and come in three different lengths: 65mm, 50mm and 35mm, to ensure legality in terms of separation distance of your indicators.
With some licence plates in some countries, with certain tail tidies, the indicator lenses can be partially hidden behind the licence plate. These extenders maximise safety and ensure legality, as you can choose the length of extender needed for optimum indicator positioning.
R&G Indicator Extenders are designed for micro indicators (8mm thread) and come in three different lengths: 65mm, 50mm and 35mm, to ensure legality in terms of separation distance of your indicators.
With some licence plates in some countries, with certain tail tidies, the indicator lenses can be partially hidden behind the licence plate. These extenders maximise safety and ensure legality, as you can choose the length of extender needed for optimum indicator positioning.
These R&G Front Indicator Adapters are made to suit the Honda CB125R '18- models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Please note: NO indicators included with this kit.
Indicator Relocator for the Ducati Flat Track Pro '16-
These R&G Indicator Adapters are made to suit the Ducati Desert Sled '18- (Front & Rear) & Ducati Scrambler 1100 '18- (Front Only) models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Please note: NO indicators included with this kit.
The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators.
Please check the existing Indicator Relay for the number of pins on your connector before ordering - if you are still unsure please ask your local dealer.
The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators.
Please check the existing Indicator Relay for the number of pins on your connector before ordering - if you are still unsure please ask your local dealer.
These R&G Rear Indicator Adapters are made to suit the Ducati Scrambler 1100 '18- models and allow the use of R&G micro indicators (RG370/RG371/RG372) or other aftermarket (8mm) indicators as rear turn signals, getting rid of the often large OEM indicators and helping give your bike a more sporty and sleek look.
Please note: NO indicators included with this kit.
These R&G Rear Indicator Adapters are made to suit the KTM 1290 Superduke GT '19- and 1290 Super Duke R ’20- models and allow the use of R&G micro indicators (RG370/RG371/RG372) or other aftermarket (8mm) indicators as rear turn signals, getting rid of the often large OEM indicators and helping give your bike a more sporty and sleek look.
Please note: NO indicators included with this kit.
These R&G Front Indicator Adapters are made to suit the Kawasaki Z900RS '18- models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Please note: NO indicators not included with this kit.
These R&G Front Indicator Adapters are made to suit the Kawasaki Z900 '17-'19. Versys-X 300 '17- &, Z125 '19-, Ninja 125 '19- & Z400/ Z250 '19- models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Please note: NO indicators not included with this kit.
These R&G Front Indicator Adapters are made to suit the Suzuki GSX-R1000 '17- / GSX-R1000R '17-models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Please note: NO indicators not included with this kit.
These R&G Front Indicator Adapters are made to suit the Honda X-ADV (750) '17-models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
No indicators included with this kit.
These R&G Front Indicator Adapters are made to suit the Suzuki GSX250R '17- models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Please note: NO indicators not included with this kit.
These R&G Front Indicator Adapters are made to suit the Suzuki GSX-R125 '17- models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Please note: NO indicators not included with this kit.
These R&G Indicator Adapters are made to suit the Suzuki GSX-S125 '17- (Front and Rear) & Suzuki GSX-R125 '17- (Rear Only), for GSX-R125 '17- front please see FAP0022BK. These indicator adapters allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Please note: NO indicators not included with this kit.
These R&G Front Indicator Adapters are made to suit the Honda NC750X '16- models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Please note: NO indicators not included with this kit.
These R&G Front Indicator Adapters are made to suit the Indian Scout '15-, Scout Sixty '18- & Scout Bobber '17- models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Please note: NO indicators not included with this kit.
These R&G Rear Indicator Adapters are made to suit the Indian Scout '15- / Scout Bobber '17- / Scout Sixty '18- models and allow the use of R&G micro indicators (RG370/RG371/RG372) or other aftermarket (8mm) indicators as rear turn signals, getting rid of the often large OEM indicators and helping give your bike a more sporty and sleek look.
Please note: NO indicators not included with this kit.
These R&G Rear Indicator Adapters are made to suit the BMW F750GS '18- & F850GS '18- models and allow the use of R&G micro indicators (RG370/RG371/RG372) or other aftermarket (8mm) indicators as rear turn signals, getting rid of the often large OEM indicators and helping give your bike a more sporty and sleek look.
Please note: NO indicators not included with this kit.
These R&G front indicator adapters are made to suit the Honda MSX125 '16- models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Please note: NO indicators are included with this kit.
These indicator adapters are made to suit the Suzuki DL1000 V-Strom '14- & DL 1000XT V-STROM '17- models and Suzuki GSX-S1000 (Faired bike) '15- models and allow the use of R&G micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
These indicator adapters are made to suit the Suzuki GSX-S1000 (Naked/unfaired bike) '15-, SV650 '16- & SV650X '18- models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Please note: NO indicators not included with this kit.
These indicator adapters are made to suit the Kawasaki Vulcan S '15- & Vulcan Cafe '18- models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Please note: NO indicators not included with this kit.
When using micro indicators, we recommend installing a set of R&G Indicator Adapters, which fill in gaps left by the removal of the original indicators.
These Indicator Adapters (IAS0007BK) come as a set of 4 pieces to suit Suzuki GSXR600/750 01-05, GSXR1000 01-04 GSF600/1200 and can be used on both front and rear indicator mounting points.
All our indicators adapters are designed to be used in conjunction with R&G Micro Indicators with 8mm threads (code RG370: bulb type, cod...
When using micro indicators, we recommend installing a set of R&G Indicator Adapters, which fill in gaps left by the removal of the original indicators.
These Indicator Adapters (IAS0008BK) come as a set of 4 pieces to suit Yamaha R6 '99-'02, R1 '98-'01, Fazer 600/1000 and can be used on both front and rear indicator mounting points.
All our indicators adapters are designed to be used in conjunction with R&G Micro Indicators with 8mm threads (code RG370: bulb type, code RG371...
When using micro indicators, we recommend installing a set of R&G Indicator Adapters, which fill in gaps left by the removal of the original indicators.
These Indicator Adapters (IAS0009BK) come as a set of 4 pieces to suit Yamaha YZF-R6 '03-'16, YZF-R1 '02-'14 and can be used on both front and rear indicator mounting points.
All our indicators adapters are designed to be used in conjunction with R&G Micro Indicators with 8mm threads (code RG370: bulb type, code RG371: LED ty...
When using micro indicators, we recommend installing a set of R&G Indicator Adapters, which fill in gaps left by the removal of the original indicators.
These Indicator Adapters (IAS0010BK) come as a set of 4 pieces to suit Round, Universal and can be used on both front and rear indicator mounting points.
All our indicators adapters are designed to be used in conjunction with R&G Micro Indicators with 8mm threads (code RG370: bulb type, code RG371: LED type, code RG372: Aero ...
When using micro indicators, we recommend installing a set of R&G Indicator Adapters, which fill in gaps left by the removal of the original indicators.
These Indicator Adapters (IAS0015BK) come as a set of 4 pieces to suit Triumph Speed Twin 1200 '19-and can be used on both front and rear indicator mounting points.
All our indicators adapters are designed to be used in conjunction with R&G Micro Indicators with 8mm threads (code RG370: bulb type, code RG371: LED type, code R...
When using micro indicators, we recommend installing a set of R&G Indicator Adapters, which fill in gaps left by the removal of the original indicators.
These Indicator Adapters (IAS0017BK) come as a set of 4 pieces to suit Kawasaki Z900 '20- & Kawasaki ZH2 '20- and can be used on both front and rear indicator mounting points.
All our indicators adapters are designed to be used in conjunction with R&G Micro Indicators with 8mm threads (code RG370: bulb type, code RG371: LED t...
When using micro indicators, we recommend installing a set of R&G Indicator Adapters, which fill in gaps left by the removal of the original indicators.
These Indicator Adapters (IAS0016BK) come as a set of 4 pieces to suit Zero FX '19-, SRF '19- and DSR '19- and can be used on both front and rear indicator mounting points.
All our indicators adapters are designed to be used in conjunction with R&G Micro Indicators with 8mm threads (code RG370: bulb type, code RG371: LED type...
These indicator adapters are made to suit the Honda CBR300R '14- model and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Micro Indicators not included.
When using micro indicators, we recommend installing a set of R&G Indicator Adapters, which fill in gaps left by the removal of the original indicators.
These Indicator Adapters (IAS0004BK) come as a set of 4 pieces to suit most Hondas and can be used on both front and rear indicator mounting points.
All our indicators adapters are designed to be used in conjunction with R&G Micro Indicators with 8mm threads (code RG370: bulb type, code RG371: LED type, code RG372: Aero LED t...
When using micro indicators, we recommend installing a set of R&G Indicator Adapters, which fill in gaps left by the removal of the original indicators.
These Indicator Adapters (IAS0005BK) come as a set of 4 pieces to suit most Kawasakis and can be used on both front and rear indicator mounting points.
All our indicators adapters are designed to be used in conjunction with R&G Micro Indicators with 8mm threads (code RG370: bulb type, code RG371: LED type, code RG372: Aero LE...
When using micro indicators, we recommend installing a set of R&G Indicator Adapters, which fill in gaps left by the removal of the original indicators.
These Indicator Adapters (IAS0006BK) come as a set of 4 pieces to suit Suzuki SV650 '03-, SV1000, GSXR600/750'96-'00 and can be used on both front and rear indicator mounting points.
All our indicators adapters are designed to be used in conjunction with R&G Micro Indicators with 8mm threads (code RG370: bulb type, code RG371...
When using micro indicators, we recommend installing a set of R&G Indicator Adapters, which fill in gaps left by the removal of the original indicators.
These Indicator Adapters (IAS0021BK) come as a set of 4 pieces for the Super Soco TC Max '20- / CPx '20- and can be used on both front and rear indicator mounting points.
All our indicators adapters are designed to be used in conjunction with R&G Micro Indicators with 8mm threads (code RG370: bulb type, code RG371: LED type,...
R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of our iconic Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs, they come with clear lenses and illuminate on the side for additional visibility.
Available in two colour options: Black or Silver.
Can be used on the front or rear of the bike.
If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors. ...
Are your micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you will find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.
** Supplied as a pair **
These resistors are for the R&G Bulb Indicators. If you have R&G LED indicators, please use RGR0002
Are your led micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you may find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.Note: We highly recommend buying this product when purchasing LED micro / mini indicators in order to save any disappointment when fitting.
NO wire cutting or soldering is required, these resistors fit inline.
** Supplied as a pair **
<...
Are your led micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you may find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.Note: We highly recommend buying this product when purchasing LED micro / mini indicators in order to save any disappointment when fitting.
NO wire cutting or soldering is required, these resistors fit inline.
** Supplied as a pair **
<...
These adapters are needed if you want to add micro/mini indicators to your R&G tail tidy for the KTM 950 SM (Supermoto), KTM 950 SMR (Supermoto R) and the KTM 990 Supermoto.
These indicator adapters are made to suit the Triumph Speed Triple ('11-) and to be used on conjunction with the LP0099BK tail tidy when your Speed Triple is installed with arrows exhausts and you prefer to use the original indicators.
These adapters are not required for use with our micro indicators.
These indicator adapters are made to suit the Aprilia RS4 125 2011 onwards and allow the use of our own micro indicators (RG370) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Micro Indicators not included.
These indicator adapters are made to suit the Honda MSX125'13-'15, Honda CBR500R, Honda CB500X and Honda CB500F '13- models onwards and allow the use of our own micro indicators (RG370) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Micro Indicators not included.
Sold as a pair
These indicator adapters are made to suit the Yamaha YZF-R1, Yamaha MT-07 , Yamaha MT-09 & SP model, Yamaha YZF-R25, Yamaha XSR700, Yamaha R3 and Yamaha Tracer 700 models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Micro Indicators not included.
These R&G Indicator Adapters are made to suit the Kawasaki Ninja 250 ('13-'17), Z1000 '14-, Z300 '16-, Kawasaki Z125 '16-, Z650 '16-, Versys 650 '15- and Ninja 650 '16- models and allow the use of R&G micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Micro Indicators not included.
These indicator adapters are made to suit the KTM 1290 Superduke '14- & KTM 790 Duke '18-, 790 Adventure '19- and 1290 Super Duke R ’20- model and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Micro Indicators not included.
These indicator adapters are made to suit the Yamaha YZF-R125 '14-'18, Genata XRZ125 '13-, BMW S1000R '14-, BMW G310R/GS '17- and BMW R1200RS '15- models and allow the use of our own (R&G) micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Micro Indicators not included.
When using micro indicators for the Husqvarna Vitpilen 701/ 401 & Svartpilen 401 '18- & 701 '19- & KTM 790 Adventure '19- , you will need the R&G Indicator Adapter kit (IA0004BK) which contains resistors, connectors and small rubber seals for one pair of indicators.
Resistors included and can be used on both front and rear indicator mounting points (please buy two sets for full bike coverage).
*Please note that the LED Indicators DO NOT come with this kit*
When using micro indicators for the Kawasaki Versys 1000 '19- you will need the R&G Indicator Adapter kit (IA0005BK) which contains connectors and small rubber seals for one pair of indicators.
Resistors are not included!
*Please note that the LED Indicators DO NOT come with this kit*
When using micro indicators for the Yamaha YZF-R125 '19- you will need the R&G Indicator Adapter kit (IA0006BK) which contains connectors and small rubber seals for one pair of indicators.
Resistors are not included!
*Please note that the LED Indicators DO NOT come with this kit*