LATEST PRODUCTS - New range of styling and crash protection for Honda CB1000R 2018 - Find Out More!.

NOW AVAILABLE - Tail Tidy for the 2018 Husqvarna Vitpilen 401 & Svartpilen 401  - Now available!.

PROUDLY DISTRIBUTING - New range from Wild Ass - Available from your nearest R&G stockist!.

LATEST PRODUCTS - New Second Skin Dashboard Screen Protectors - Find Out More!.

R&G DEALERS - R&G products are available worldwide - Find your nearest dealer!.

Shop By Product CategorySetting the standard in crash protection and bolt-on motorcycle accessories.


You're viewing Denali Accessories for Universal Showing all 39 results


RSS

DENALI 2.0 D2 Amber TriOptic Lens KitDENDNL.D2.10100

This Amber TriOptic Lens Kit for DM lights is designed to maximize visibility in foggy and rainy conditions. The amber colour of the lens increases visibility in fog and rain by blocking blue frequencies from the light, which reflects off water vapour and decrease vision. The kit includes two spot lenses and two flood lenses. Use two spots for maximum distance, two floods for the maximum spread, or one of each to create a 50/50 True-Hybrid that combines the best of both worlds.

What's ...

£15.83ex. VAT
Full Details Add to Basket

DENALI 2.0 D4 Amber TriOptic Lens KitDENDNL.D4.10100

This Amber TriOptic Lens Kit for D4 lights is designed to maximize visibility in foggy and rainy conditions. The amber colour of the lens increases visibility in fog and rain by blocking blue frequencies from the light, which reflects off water vapour and decrease vision. The kit includes two spot lenses and two True-Hybrid lenses. Use two spots for maximum distance, two Hybrid lenses for a 50/50 True-Hybrid or one of each to create a Spot-Hybrid that adds some additional close range fill while ...

£31.66ex. VAT
Full Details Add to Basket

DENALI 2.0 DataDim Dual-Intensity ControllerDENDNL.WHS.11000

This DENALI DataDim Dual-Intensity Controller enables the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. All DENALI 2.0 Light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.

What's In The Box?
(x1) DataDim Dual-Intensity Controller
(x1) Dual-Intensity Trigger Wire

£39.99ex. VAT
Full Details Add to Basket

DENALI 2.0 DrySeal ON-OFF Waterproof Illuminated Switch with Handlebar MountDENDNL.WHS.11100

This premium DENALI DrySeal ON-OFF Waterproof Switch can handle a load up to 15 Amps and is ideal for controlling many different accessories such as auxiliary lighting. The kit includes both handlebar switch mounting bands, as well as an adhesive pad for surface mounting.

In addition to moulded silicone gasket seals, we use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when...

£27.49ex. VAT
Full Details Add to Basket

DENALI 2.0 DM Amber TriOptic Lens KitDENDNL.DM.10100

This Amber TriOptic Lens Kit for DM lights is designed to maximize visibility in foggy and rainy conditions. The amber colour of the lens increases visibility in fog and rain by blocking blue frequencies from the light, which reflects off water vapour and decrease vision. The kit includes two spot lenses and two flood lenses. Use two spots for maximum distance, two floods for the maximum spread, or one of each to create a 50/50 True-Hybrid that combines the best of both worlds.

What's ...

£15.83ex. VAT
Full Details Add to Basket

DENALI 2.0 DR1 Amber TriOptic Lens KitDENDNL.DR1.10100

This Amber TriOptic Lens Kit for DR1 lights is designed to maximize visibility in foggy and rainy conditions. The amber colour of the lens increases visibility in fog and rain by blocking blue frequencies from the light, which reflects off water vapour and decrease vision. The kit includes two spot lenses and two True-Hybrid lenses. Use two spots for maximum distance, two Hybrid lenses for a 50/50 True-Hybrid or one of each to create a Spot-Hybrid that adds some additional close range fill while...

£19.99ex. VAT
Full Details Add to Basket

DENALI 39mm-49mm Tube Mount Kit For Mounting Auxiliary Lights To Conventional Fork TubesDENLAH.00.10600

This DENALI Fork Tube Light Mount Kit allows fitment of any DENALI LED Light Kit to conventional forks, or any tube 39mm - 49mm (1.5" - 1.875") in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional, fully rotatable mounting shelf to create a super versatile and robust light mounting solution.

Available in either Black or Chrome finish.

£54.16ex. VAT
Full Details
- Options Available -

DENALI 32mm-38mm Tube Mount Kit For Mounting Auxiliary Lights To Frame, Fork & Crash BarsDENLAH.00.10400

This DENALI Engine Guard/Frame Light Mount Kit allows fitment of any DENALI LED Light Kit to engine guards, frame tubes, or any tube 32mm-38mm (1.25"-1.5") in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional, fully rotatable mounting shelf to create a super versatile and robust light mounting solution.

These clamps are intended for mounting lights to OEM or aftermarket engine ...

£50.83ex. VAT
Full Details
- Options Available -

DENALI 50mm-60mm Tube Mount Kit For Mounting Auxiliary Lights To Inverted Fork TubesDENLAH.00.10500 B

This DENALI Fork Tube Light Mount Kit allows fitment of any DENALI LED Lights to inverted forks, or any tube 50mm-60mm (2"-2.375") in diameter. These light mounts have a unique octagonal inner profile that allow the clamps to securely grip a wide range of tube diameters and include an optional, fully rotatable mounting shelf to create a super versatile and robust light mounting solution.

These clamps are intended for motorcycles with exposed inverted forks such as enduro, dual sport, an...

£55.83ex. VAT
Full Details Add to Basket

Denali Power Switch Eliminator Plug (Single and Dual Intensity Harness')DENDNL.WHS.10800

The DENALI power switch eliminator plug for 1st generation single & dual intensity harnesses replaces the original on/off button so your lights will automatically power on and off with the motorcycle's ignition. Enjoy the convenience of having your lights on anytime your bike is running and peace of mind knowing they will be off with the ignition. This handy eliminator plug is very easy to install, simply remove the power button that was included with the kit and plug the switch eliminator in. D...

£4.58ex. VAT
Full Details Add to Basket

Denali Snap-on Beam Filter Adapter for Denali DR1 LED LightsDENDNL.LF

Get more from your Denali DR1 Lights with a set of Snap-On Filters, modifing the light pattern for better visability and prolonging the lifespan of the light.

£28.33ex. VAT
Full Details
- Options Available -

Denali "All-On" Combination Low Beam With High Beam Conversion H4 Headlight Wiring HarnessDENDNL.WHS.10200

The DENALI "All-On" Combination Low Beam With High Beam Conversion H4 Wiring Harness keeps the low beam on with the high beam activated. Enjoy dramatically improved light output that also increases overall visibility significantly. Simple plug and play installation allows the adapter to plug "inline" between the DENALI M5 or M7 LED headlight module and your motorcycle with no other modifications or switches. Improve lighting on the sides of the road, directly in front of the motorcycle and over ...

£20.83ex. VAT
Full Details Add to Basket

DENALI 2.0 Y-Splitter KitDENDNL.WHS.11400

This DENALI 2.0 Y-Splitter Kit powers two sets of DENALI 2.0 LED Lights from one harness! The plug-n-play adapter simply plugs into the end of the DENALI 2.0 Premium 3-pin Harness, allowing control of two sets of lights.

What's In The Box?
(x2) 3-Pin Y-Splitter

£25.83ex. VAT
Full Details Add to Basket

DENALI 2.0 Perch Switch Mount KitDENDNL.MBK.10000

This DENALI Perch Switch Mount is used to mount DENALI DrySeal Waterproof Switches to a motorcycle's clutch or brake perches. The kit includes everything needed to mount to both M5 and M6 horizontally or vertically oriented bolts.

What's In The Box?
(x1) Flat Switch Mounting Plate
(x1) Angled Switch Mounting Plate
(x1) M5 & M6 Hardware Kit

£19.99ex. VAT
Full Details Add to Basket

DENALI 2.0 Dual Switch Mounting PlateDENDNL.MBK.10100

This Dual Switch Mounting Plate allows two DENALI DrySeal Waterproof Switches to be mounted to the same Handlebar Mounting Band.

What's In The Box?
(x1) Dual Switch Mounting Plate

£13.33ex. VAT
Full Details Add to Basket

DENALI 2.0 Sealed Micro RelayDENDNL.WHS.028

This Sealed Micro Relay is a replacement for the standard DENALI 2.0 Premium 3-pin Harness.

What's In The Box?
(x1) DENALI Sealed Micro Relay

£3.74ex. VAT
Full Details Add to Basket

DENALI 2.0 Premium Wiring Harness KitDENDNL.WHS.10900

This DENALI Premium Wiring Harness features high-quality waterproof components and is designed to power two DENALI 2.0 LED Light Pods. It features low profile, water tight connectors and premium moulded wire to ensure moisture is kept out of the system. The harness includes a completely sealed, waterproof switch that was engineered from the ground up to withstand harsh out-door abuse on powersports vehicles. Its clever design can be either flush or bar mounted.

The harness also features...

£66.66ex. VAT
Full Details Add to Basket

DENALI 2.0 DrySeal HI-LOW-OFF Waterproof SwitchDENDNL.WHS.11200

The DENALI HI-LOW-OFF Switch replaces the standard ON-OFF switch. The switch enables independent dimming of the lights, separate from the vehicle's OEM lighting system. This eradicates the issues presented by vehicles that do not provide and a clean 12v high beam trigger signal. This switch is also a great option for those who want full independent control of their auxiliary lights.

In addition to moulded silicone gasket seals, we use a unique DrySeal construction technique that encases...

£23.33ex. VAT
Full Details Add to Basket

DENALI 2.0 Switch Eliminator PlugDENDNL.WHS.11300

The DENALI Power Switch Eliminator plug replaces the standard On-Off switch so your lights will automatically power on and off with the vehicle's ignition. Enjoy the convenience of having your lights on any time your bike is running and peace of mind knowing they will turn off with the ignition.

What's In The Box?
(x1) Power Switch Eliminator

£7.91ex. VAT
Full Details Add to Basket

DENALI 2.0 Plug-n-Play CANsmart Controller for BMW R1200 LC SeriesDENDNL.WHS.11600

We didn't want to make just another accessory controller, we wanted to make a smarter one.

Harness the power and intelligence of your vehicle's CANbus electrical system. The DENALI CANsmart Controller provides plug-n-play installation of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW "WonderWheel" or the CANsmart Accessory Manager Software.

The four dedicated circuits are pre-programmed to connect and independently ...

£189.99ex. VAT
Full Details Add to Basket

DENALI 2.0 Light Harness ExtensionDENDNL.WHS.11500

This DENALI Light Harness Extension can be used to extend the light leads of your DENALI 2.0 Premium 3-pin Harness by 24"

What's In The Box?
(x1) 24" 3-Pin Harness Extension

£10.83ex. VAT
Full Details Add to Basket

Denali Switch Mount For Vertical Perch BoltsDENMBK.00.10300

This Denali accessory bracket provides a convenient mounting point for either single or dual Denali on/off switches.

Mounts to the either the clutch or brake control housing with a longer bolt and one of two different length spacers (included). The Denali on/off switch can then be mounted to this bracket using the double-sided tape or velcro provided with lighting kits and accessory wiring harnesses.

£9.16ex. VAT
Full Details
- Options Available -

Denali Replacement Relay for the PowerHub2 Power Distribution ModuleDENTT-00014

Package contains one(1x) 30 amp Tyco/Bosch replacement micro relay for the PowerHub2 Power Distribution Module.

£9.16ex. VAT
Full Details Add to Basket

Denali Assorted ATC FusesDENTT-00016

This Denali fuse package contains four 3amp, two 5amp, two 7.5amp, two 10amp, and one 15 amp fuses for use in ATC/Blade fuse blocks and in-line fuse holders.


Note: Make sure you use the appropriate fuse for the electrical accessory on that circuit. The purpose of a fuse is to protect the electrical accessory from overload, using too large a fuse could cause damage to your electrical accessory.

£7.08ex. VAT
Full Details Add to Basket

Denali Pod Interlink Adapter (hinged Pod-to-bracket version, single)DENTT-D1.P-SHLINK

The Denali Interlink Pod Adapter allows you to link 1 Denali Pod to a Denali hinge mount. sold singularly.

Includes:
1 bolt
1 nut
1 hinge

£7.92ex. VAT
Full Details Add to Basket

Denali Light Mount M10 Hinge 10mm bolt, singleDENTT-D1.P-SHM10

This Denali Mount Hinge works with the Denali LED Lighting system and includes a 10mm bolt and bracket
Mounts your Denali LED Lighting system with 10mm bolt

£3.33ex. VAT
Full Details Add to Basket

Denali Clamp-on Switch Mount For 7/8 inch HandlebarsDENXS003AF004

This Denali mounting kit is designed to attach the on / off switch for your Denali off-road lights to your handlebars.

Suitable for 22mm or 7/8 inch handlebars.

£8.75ex. VAT
Full Details Add to Basket

Denali Replacement Single-Intensity dual light harness with lighted switch (2-pin connector) for Denali LED headlightsDENTT-WH.1

This wiring harness comes with everything you need to wire two Denali D1 or DM1 LED pods, including relay, and lighted on/off switch for handlebar mounting.

Compatible with the Denali D1 and DM1 LED lights for use as a single-intensity replacement/accessory harness.

*This harness will not work with Deanli D2 or DX LED lights.

£34.99ex. VAT
Full Details Add to Basket

Denali Replacement D2 ROUND Dual Intensity light harness with lighted switch (5 amp fuse, 3-pin connector) for Denali LED headlightsDENTT-WH.2

This wiring harness converts the single-intensity Denali D2S LED light to function as a Denali D2D dual-intensity light. The package comes with everything you need to wire two Denali D2 or DX LED pods, including relay, and lighted on/off switch for handlebar mounting.

Compatible with the Denali D2 and DX LED lights for use as a single-intensity replacement/accessory harness.

*This harness will not work with Deanli D1 or DM1 LED lights.

£60.83ex. VAT
Full Details Add to Basket

Denali Light Mount M6 Hinge 6mm bolt, singleDENTT-D1.P-SHM6

This Mount Hinge works with the Denali LED Lighting system and includes a 6mm bolt and bracket
Mounts your Denali LED Lighting system with 6mm bolt

£3.33ex. VAT
Full Details Add to Basket

Denali Light Mount M8 Hinge 8mm bolt, singleDENTT-D1.P-SHM8

This Mount Hinge works with the Denali LED Lighting system and includes a 8mm bolt and bracket
Mounts your Denali LED Lighting system with 8mm bolt

£3.75ex. VAT
Full Details Add to Basket

Denali PowerHub2 Fuse Block w/wiring harnessDENELC.00.30000

The PowerHub2 Power Distribution Module, manufactured by Denali is made in the USA and allows you to safely connect up to 6 electronic devices to your motorcycle in a clean, workmanlike manner. It's CANbus compatible and includes six 15-amp rated and fused outputs, six ground posts, and a plug-and-play wiring harness for direct battery hookup. Each of the six outputs can be individually set as "always on" or "switched" on/off with the ignition of the motorcycle. Instead of attaching multiple rin...

£90.83ex. VAT
Full Details Add to Basket

DENALI 2.0 Fender Bolt Mount Kit For Mounting DM or D2 Auxiliary Lights To M5 and M6 BoltsDENLAH.00.10700.B

This Denali LED Fender Mount Kits allow you to mount the Denali DM or D2 lights onto your front fender mounting bolt. Compatible with both M5 and M6 threaded mounting holes, this kit is designed to eliminate the light pod hinge to create the most low profile mounting solution possible. Keep in mind however, that when using this particular mounting solution the lights are adjustable up/down, but are fixed left/right.

All kits include appropriate M5 and M6 fender bolts of varying length, ...

£31.66ex. VAT
Full Details Add to Basket

Denali "L" Bracket Accessory Mount, 2.5 inch. BlackDENTWT.00.013.001

The DENALI L bracket accessory mount 2.5" black is great for mounting various accessories to your motorcycle. High strength stamped steel is 1" wide, 3mm in thickness and two and a half inches in length. This useful bracket is powder coated in an attractive semi matte black finish to increase durability and corrosion resistance. Great for use when fitting horns, lights, device mounts and anything else you need to fabricate. Keep a few of these handy DENALI L brackets in your toolbox to enhance y...

£7.08ex. VAT
Full Details Add to Basket

Denali Switch Mount for Horizontal Perch BoltsDENMBK.00.10100

This accessory bracket provides a convenient mounting point for either single or dual Denali on/off switches. Fits most metric bikes.

Mounts to the either the clutch or brake control housing with a longer bolt and one of two different length spacers (included). The Denali on/off switch can then be mounted to this bracket using the double-sided tape or velcro provided with lighting kits and accessory wiring harnesses.

£9.16ex. VAT
Full Details Add to Basket

Denali Replacement Switch for Dual Intensity LightsDENTT-D1.SWITCH

This is a replacement switch for all Denali LED Lights. Perfect if you have damaged yours or need a spare.

£6.66ex. VAT
Full Details Add to Basket

DENALI Three Position Switch Kit for Dual Intensity LightsDENDNL.WHS.10700

The DENALI 3 position switch kit for 1st generation dual intensity harnesses - hi-off-low is an upgrade over the original that permits more control over light output on your first generation auxiliary D2 & DX LED lights independently from the motorcycles main headlight. A laser cut powder coated steel mounting bracket is included for convenient mounting to any M5/M6 size bolt commonly found on handlebar controls. This handy switch kit is easy to install and directly replaces the original switch ...

£29.16ex. VAT
Full Details Add to Basket

Denali LED Lighting Universal Offset Mount KitDENLAH.00.10000

Constructed from black anodized billet aluminum for strength and durability, this kit provides a 1.75" (45mm) offset for your lights from any M5, M6 or M8 bolt point on your motorcycle.

Typical mounting points include fairings, triple clamps and fenders, and can be mounted horizontally or vertically. The bracket will accept any M8 bolt, making this the most universal offset mounting solution we know of!

Lights (pictured) are not included! (but are available seperately).

£39.16ex. VAT
Full Details Add to Basket

Denali Crashbar Light Mounts (Fits crashbars 22mm-28mm in diameter)DENLAH.00.10300.B

These stylish clamps are machined from 6061-T6 Aluminum for strength and durability. The kit allows fitment of any Denali LED Lighting Kit to any tubular bar ranging from 22mm to 28mm in diameter.

The bracket can be mounted in numerous positions allowing the light pods to be placed for optimal beam projection, while keeping the pods themselves protected.

Kit Includes:

2x black anodized aluminum machined clamps
Mounting Hardware

Compatible with ALL ...

£48.33ex. VAT
Full Details Add to Basket

 
© 2018 Racing Technique Ltd. (t/a R&G)