Shop By BikeSetting the standard in crash protection and bolt-on motorcycle accessories.

Tidy up your rear end with a Aluminium R&G Tail Tidy/Licence Plate Holder.

Made from 2.5mm Stainless Steel sheet for strength and powder coated black for great looks and durability. Our tail tidy units are easy to fit and transform the rear of the bike.

This model is suitable for the Yamaha YZF-R6 '17- models and can be fitted with OEM indicators, (as pictured) or our own aftermarket micro/mini LED indicators (RG371 or RG372) - please see related products for more details.

Universal Licence plate adapters to suit different number plates hole widths, once installed enable a certain amount of flexibility when fitting the a number plate, replacing the need to redrill your number plate.

Available in a one size fits all.

Supplied in pairs.

NO TAIL TIDY BRACKET IS SUPPLIED WITH THIS KIT

This Tail Tidy is suitable for the Yamaha YZF-R6 (2003-2005) and the YZF-R1 (2002-2003). This product uses micro indicators which might require the fitting of RGR0001 resistors

Please note you will need to fit a smaller licence plate than one that meets UK legal requirements to be able to have the use of side indicators.

Radically smarten up the rear end of your YZF-R6 with this R&G Tail Tidy, Suitable for the Yamaha YZF-R6 (2006-2016).

R&G Aero Crash Protectors feature our stylish, aerodynamic Aero Bobbins and are available in Black or White options.

R&G Crash Protectors offer core motorcycle protection, keeping the frame, engine and other critical components off the ground in the event of a crash, drop or slide.

R&G Aero Crash Protectors feature our stylish, aerodynamic Aero Bobbins and are available in Black or White options.

R&G Crash Protectors offer core motorcycle protection, keeping the frame, engine and other critical components off the ground in the event of a crash, drop or slide.

These upper/front crash protectors feature our stylish, aerodynamic Aero Bobbin and are suitable for the Yamaha YZF-R6 '06-.R&G Aero Bobbins are a stylish, aerodynamic, teardrop shaped bobbin improving on the original good looks of our highly successful and popular standard round bobbins. Fitted with a removable end cap which hides the bobbins fittings, this sleek new design looks superb and is a winner on road and track!

These lower/rear crash protectors feature our stylish, aerodynamic Aero Bobbin and are suitable for the Yamaha YZF-R6 '06 -. R&G Aero Bobbins are a stylish, aerodynamic, teardrop shaped bobbin improving on the original good looks of our highly successful and popular standard round bobbins. Fitted with a removable end cap which hides the bobbins fittings, this sleek new design looks superb and is a winner on road and track!

These Top/Front engine mount crash protectors are suitable for the Yamaha YZF-R6 produced between 1999 and 2002.
R&G Aero Bobbins from R&G - the market leaders in crash protection and the only insurance-approved crash protectors on the market. As used by some of the world's top race teams, what better endorsement do you need! R&G – innovation not imitation!

These Top/Front crash protectors are suitable for the Yamaha YZF-R6 produced between 2003 and 2005.

These Lower/Rear crash protectors are suitable for the Yamaha YZFR6 produced between 1999 and 2002.
R&G Aero Bobbins from R&G - the market leaders in crash protection and the only insurance-approved crash protectors on the market. As used by some of the world's top race teams, what better endorsement do you need! R&G – innovation not imitation!

These Lower/Rear crash protectors are suitable for the Yamaha YZFR6 produced between 2003 and 2005.

These Top/Front crash protectors are suitable for the Yamaha YZF-R6 (2006- models).

Available in Black, Blue or Titanium (colour) powder coat finishes to fit the Yamaha YZF-R6 '17- models.

Made from pressed aluminium. They improve the looks of your bike as well as help protect your expensive and vulnerable radiator from flying road debris.

R&G Radiator Guards are made from aluminium, improve looks and protect your expensive and vulnerable radiator from flying debris.
This radiator guard is suitable for Yamaha YZF-R6 ('06-'16) / YZF-R1 ('07-'08).

R&G downpipe grille is made from aluminium, improve looks and protects your expensive and vulnerable downpipes and other parts below the radiator from flying debris and damage.

The product is compatible with the Yamaha YZF-R6 - models.

Available in Black, Titanium or Blue powder coat finishes.

Please Note: R&G Radiator Guard not included but available separately.

Available in a 16"x 12" sheet, this R&G Titanium universal mesh is both lightweight and super strong, thanks to its real Titanium (ASTM B265 Grade 1) mesh construction.

Made from the same high quality mesh found on in our Titanium radiator and oil cooler guards, it improves the looks of your bike and help to protect your expensive and vulnerable radiator and other components from flying road debris.

No permanent modifications need to be made to the bike.

Supplied with...

This specific Race Series Engine Case Cover is compatible with the Yamaha YZF-R6 '06-, protecting the Right Hand Side Casing from damage in the event of a crash, slide or drop.

R&G Race Series Engine Case Covers have been specifically developed in collaboration with selected high level race teams and crash tested in BSB level racing events to ensure they meet and exceed all required standards for case protection.

In addition to the existing R&G Engine Case Cover range comes R&G...

This specific Race Series Engine Case Cover is compatible with the Yamaha YZF-R6 '08-, protecting the Right Hand Side Casing from damage in the event of a crash, slide or drop.

R&G Race Series Engine Case Covers have been specifically developed in collaboration with selected high level race teams and crash tested in BSB level racing events to ensure they meet and exceed all required standards for case protection.

In addition to the existing R&G Engine Case Cover range comes R&G...

This specific Race Series Engine Case Cover is compatible with the Yamaha YZF-R6 '06-, protecting the Right Hand Side Casing from damage in the event of a crash, slide or drop.

R&G Race Series Engine Case Covers have been specifically developed in collaboration with selected high level race teams and crash tested in BSB level racing events to ensure they meet and exceed all required standards for case protection.

In addition to the existing R&G Engine Case Cover range comes R&G...

Left Hand Side Crankcase Cover suitable for the Yamaha YZF-R6 '06- models.

Made in the U.K.



R&G’s entire range of Engine Case Covers (ECCs) have been approved by the British Superbike Championship (BSB) and the American Motorcycling Association (AMA) for use in any competition sanctioned by the Organisations.

Right Hand Side Crankcase Cover for Yamaha YZF-R6 '08- models.

Made in the U.K.



R&G’s entire range of Engine Case Covers (ECCs) have been approved by the British Superbike Championship (BSB) and the American Motorcycling Association (AMA) for use in any competition sanctioned by the Organisations

Right hand side oil pump cover suitable for the Yamaha YZF-R6 '06- models.

Made in the U.K.



R&G’s entire range of Engine Case Covers (ECCs) have been approved by the British Superbike Championship (BSB) and the American Motorcycling Association (AMA) for use in any competition sanctioned by the Organisations

Suitable for the Yamaha YZF-R6 '08- (including 2017 models!)Our industry leading engine case covers are now available in kit form containing all the engine case covers R&G offer for your bike in one go. Developed on track and brought to the road, R&G Engine Case Covers bring BSB and AMA race series approved levels of engine cover protection to your bike for complete peace of mind.

R&G Race Series Engine Case Covers have been specifically developed in collaboration with selected high lev...

Suitable for the Yamaha YZF-R6 '08- (including 2017 models)Our industry leading engine case covers are now available in kit form containing all the engine case covers R&G offer for your bike in one go. Developed on track and brought to the road our engine case cover...Made in the U.K.



R&G’s entire range of Engine Case Covers (ECCs) have been approved by the British Superbike Championship (BSB) and the American Motorcycling Association (AMA) for use in any competition sanctione...

These engine case sliders are a new addition to the R&G Racing range of products and fit to the right-hand side of the bike. They are suitable for the YZF-R6 '08- models.

These engine case sliders for the Yamaha YZF-R6 ('06-'12) and Yamaha YZF-R1 ('09-'14) models fit neatly and easily to the existing engine case on the left-hand side and will provide additional protection in the event of a drop.

R&G engine case sliders complement the R&G crash protectors and the additional range of products that we offer for this bike.

Suitable for the YZF-R6 '06-'17 and YZF-R1 '09-'14 models.

These engine case sliders are a new addition to the R&G Racing range of products and fit to the right-hand side of the bike. They are suitable for the YZF-R6 '06-'07 models.

R&G Second Skin stone chip protection film is a non-yellowing (UV Stable), ultra-tough, easy-to-apply, polyurethane protective film. Designed to protect your road or track motorcycle from stone chips, road salt, tar, abrasions, fairing stress fractures and bodywork/fuel tank scratches from general use. The unique properties of our protection film enable it to disperse the impact energy of gravel and small stones, bouncing them off and leaving your bodywork untouched beneath.

R&G Second Skin stone chip protection film is a non-yellowing (UV Stable), ultra-tough, easy-to-apply, polyurethane protective film. Designed to protect your road or track motorcycle from stone chips, road salt, tar, abrasions, fairing stress fractures and bodywork/fuel tank scratches from general use. The unique properties of our protection film enable it to disperse the impact energy of gravel and small stones, bouncing them off and leaving your bodywork untouched beneath.

These bar end protectors are suitable for the Honda CrossRunner ('11-), Honda SH300i ('07-), Triumph Tiger Explorer 1200 ('12-) Yamaha YZF-R6 '17- and Suzuki V-Strom 250 '17- models.

Helping to protect those expensive levers and clipons from damage in the event of a drop or crash.

Protect your bars with our great little bar end sliders/protectors. Suitable for Renthal bars, LSL bars and for the Ducati 848 '08- / Ducati Diavel (2011-) & Monster 1200 & S '14-, KTM RC125/200 '14-.

Please Note, if fitting to a bike with closed ended grips, Modification will be required to install these bar ends.

Helping to protect those expensive levers and clipons from damage in the event of a drop or crash.

Easy to install they simply screw into the end of the bars.

These bar end protectors are suitable for the Yamaha Fazer 600 (produced up to 2003), FZ-1 ('06 - '11), FZ8 (2010 onwards), (YZF-R1 ('99 - '14, YZF-R6 ('06 - '14), FJR1300 ('01 - '14).

These bar end protectors are suitable for the Yamaha YZFR6 model.

These Bar End Sliders are suitable for Gilles and Driven, clip ons (Plain) Bars.

These Bar End Sliders are suitable for Gilles (Threaded) Vario and GP Light Bars.

This Kaoko Throttle Stabilizer kit is designed to fit the Yamaha YZF-R6 '03-.

This Kaoko Throttle Stabilizer kit is designed to fit the Yamaha FJR1300(all year models), YZFR1 (2004-2015), YZFR6 (all year models).

Awarded RiDE magazine Best buy award status.

R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.

Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and scooters). In only 2 minutes the grips heat up to 35°C (95°F) and on those r...

Eliminate that annoying spinning grip by getting a tube of grip glue. Holds grips firmly in place. Helps to reduce arm pump caused by trying to hold spinning grips in place.


Ideally suited to be used when installed R&G Heated Grips.

This Carbon Fibre Lever Guard kit has been specifically designed for the Yamaha YZF-R6 '06- models.

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting yo...

This moulded Lever Guard kit can be fitted to either the brake or clutch sides and has been specifically designed for the Yamaha YZF-R6 '06- models and is available in a range of colour options.

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel racing (either from accidenta...

This R&G Moulded Lever Guard kit can be fitted to either the brake or clutch sides and comes with our universal fitting kit, its expanding design clamps to the inside of the clipon/handlebar (13-21mm diameter) and is available in a range of colour options.

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch l...

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filters; again potentially causing front brake engagement.

Are they cotton reels or swingarm protectors? Well, they are both really!!

R&G Offset Cotton Reels protect the swingarm and core swingarm components from damage in the event of a crash, slide or drop. Doubling up as paddock stand bobbins too, they allow the motorcycles rear wheel to be lifted into the air with the use of a paddock stand to perform chain adjustments, chain lubrication and cleaning! This particular pair of R&G Offset Cotton Reel kit has been specially designed to move the...

These new style offset cotton reels are a cross between our traditional style cotton reels and our spindle sliders.

Suitable for the Yamaha YZF-R6 '06- models.

These cotton reels are suitable for Aprilia Mana and Mana GT models ('08-) and the Yamaha YZF-R6 '1- models.

These cotton reels mount directly into the mounting points on the rear swingarm offering the best of both worlds in terms of crash protection and functionality with the ability to use R&G cotton reels, which offer excellent crash protection to those components located towards the rear as well as the ability to lift up the rear of the bike with a paddock stand for maintenance and tyre changes.

Available in Black or White.

Sold in Pairs.

These fork protectors are suitable for the Yamaha YZF-R1/R1M '15-, YZF-R6 '17- and Yamaha MT-10 '16- models.

Easy to install, they help to eliminate damage to the front forks, fork bottoms and brake callipers during a crash or drop.

These fork protectors are suitable for the Yamaha YZF-R6 (models produced between 1999 and 2002).

These fork protectors are suitable for the Yamaha YZF-R6 (models produced between 2003 and 2004).

These fork protectors are suitable for the Yamaha YZF-R6 '05-'16 & YZF-R1 '02-'14 *(not compatible with the YZF-R1 SP models)* and T-MAX 530 '15-.

These Swingarm Protectors, for Yamaha YZF-R1 '09- / YZF-R1M ’15- / YZF-R6 '06-'17- models, fit into the rear spindle and expand to a snug fit, looking great and protecting the swingarm. They are held in place by means of their expanding design, meaning installation is very simple. They help protect the core, expensive components found around the swingarm area, such as the brake calliper, disc, sprocket and the swingarm itself!

These swingarm protector kit is suitable for the Yamaha YZF-R1 ('09-), YZF-R1M '15- and Yamaha YZF-R6 ('06-'16) models.

Fitting into the side of the swing arm this protector helps to protect the swingarm, rear caliper, discs and drive sprocket from damage in the event of a drop of crash

This 2-piece Tank Traction Grip kit has been specially designed for the Yamaha YZF-R6 '17- models.

R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking....

R&G Tank Traction Grips have been specially designed for the Yamaha YZF-R6 '99-'02.

R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking.

Please...

R&G Tank Traction Grips have been specially designed for the Yamaha YZF-R6 '03-'05.

R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking.

Please...

R&G Tank Traction Grips have been specially designed for the Yamaha YZF-R6 '06-'07.

R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking.

Please...

R&G Tank Traction Grips have been specially designed for the Yamaha YZF-R6 '08-'11.

R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking.

Please...

R&G Tank Traction Grips have been specially designed for the Yamaha YZF-R6 '12-'16

R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking.

Please ...

This 3-piece Boot Guard kit has been specially designed for the Yamaha YZF-R6 '17 models.

R&G Boot Guard kits are available for a large range of bike styles and brands, with new applications released regularly. The unique R&G texture was specifically designed to be durable, providing the rider with a buffer between his boot on the exposed areas of the swingarm which can (on occasion) come into contact with each other during cornering causing wear and unwanted damage to the swingarm or b...

Suitable for the Honda Blackbird (All Years)and Yamaha ZF-R6 '03-'05

The Shocktube® is a high impact waterproof vented tube made from top quality bonded 100% CR Neoprene™ which is double lined with stretch nylon on both sides.
Completely enclosing the motorcycle's rear shock absorber(s) and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.
The Shocktube® can be fitted to most motorcycle's with either monoshock or twin shock systems qu...

The Shocktube® is a high-impact, waterproof, vented tube, made from top quality, bonded 100% CR Neoprene™ which is double lined with stretch nylon on both sides.
Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.
The Shocktube® can be fitted to most motorcycles with either monoshock or twin shock systems quickly, without the need to remove the shock absorber!
It continually prote...

Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.

Patent No: GB2459728

This Tank Slider (pair) kit is compatible with the Yamaha YZF-R6 '17- models.

As used by the California Superbike School. (http://www.superbikeschool.com/)

Our Tank Sliders are made from Carbon fibre reinforced with DuPont™ Kevlar®, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tank, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.

Made in the U....

Our Tank Sliders are made from Carbon fibre reinforced with DuPont™ Kevlar®, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tank, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.

Made in the U.K

Application takes only minutes and they could save you having to replace your tank which can get dented or scratched in the event of a crash.

As used by t...

Should you drop or crash your bike, your exhaust silencer is likely to be scraped/damaged - however, an R&G exhaust protector can protect these otherwise exposed and expensive components from damage.



Easily to install, an R&G Exhaust Protector is held securely in place thanks to its incorporated jubilee style clip, the inclusion of a silicone strip/band ensures the exhaust is kept in perfect condition and isn't marked during installation/its lifetime on the exhaust.

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Suitable for the Yoshimura R-77 exhaust.
...

This Hexagonal Exhaust Protector is suitable for hexagonal cans such as the Akrapovic Hex and the standard Yamaha R6 '06-'11 can. It fits both left and right cans/exhausts. Images 4, 5 & 6 show the product fitted to a BMW S1000RR. Made in the U.K.

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Made in the U.K.

This Exhaust Hanger is suitable for Yamaha YZF-R6 '99-'02 models with a single exhaust system.

This Exhaust Hanger is suitable for Yamaha YZF-R6 '03-'05 models with a single exhaust system.

Once you have removed the pillion footrests, fill the void left behind and cover those otherwise exposed holes in the sub-frame with an R&G blanking plate.

These R&G Footrest Blanking Plates have been specially designed to cover/protect both the left-hand sides of the Yamaha YZF-R6 '17-

R&G Footrest Blanking Plates are easy to install, simply screwing into place in place of the rear pillion pegs, covering those otherwise exposed sub-frame holes, that if left uncovered could re...

Whether you are transporting your bike to a track or down to your local mechanic for some work, make securing your bike a lot easier with the R&G Tie-Down Hook.

This pair of Tie-Down Hooks have been specially designed to fit the Yamaha YZF-R6 '17- models.

Please note;- no ratchet straps are included with this product!

Never forget your sidestand puck again!

Kickstand Shoes bolt onto the bottom of the sidestand, to enlarge the original’s footprint by up to 100%, significantly spreading the load placed upon it, to help prevent the stand ‘piercing’ the ground. Despite this enlargement, the Shoe does not affect ground clearance or interfere with the chain run during normal riding.

This particular model fits the Yamaha YZF-R6 '17 - models.

The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators for the following manufacturers: Honda, Kawasaki & Yamaha.

Please check the existing Indicator Relay where possible before ordering - if you are still unsure please ask your local dealer.

When using micro indicators, we recommend installing a set of R&G Indicator Adapters, which fill in gaps left by the removal of the original indicators.

These Indicator Adapters (IAS0008BK) come as a set of 4 pieces to suit Yamaha R6 '99-'02, R1 '98-'01, Fazer 600/1000 and can be used on both front and rear indicator mounting points.

All our indicators adapters are designed to be used in conjunction with R&G Micro Indicators with 8mm threads (code RG370: bulb type, code RG371...

When using micro indicators, we recommend installing a set of R&G Indicator Adapters, which fill in gaps left by the removal of the original indicators.

These Indicator Adapters (IAS0009BK) come as a set of 4 pieces to suit Yamaha YZF-R6 '03-'16, YZF-R1 '02-'14 and can be used on both front and rear indicator mounting points.

All our indicators adapters are designed to be used in conjunction with R&G Micro Indicators with 8mm threads (code RG370: bulb type, code RG371: LED ty...

R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of our iconic Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs, they come with clear lenses and illuminate on the side for additional visibility.

Available in two colour options: Black or Silver.

Can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors. ...

Are your micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you will find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.

** Supplied as a pair **


These resistors are for the R&G Bulb Indicators. If you have R&G LED indicators, please use RGR0002

Are your led micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you may find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.Note: We highly recommend buying this product when purchasing LED micro / mini indicators in order to save any disappointment when fitting.

NO wire cutting or soldering is required, these resistors fit inline.

** Supplied as a pair ** <...

R&G Micro Indicators (turn signals) designed to be fitted to the rear of your motorbike.

Can be used on the front or rear of the bike.

Supplied as a pair

R&G LED Micro Indicators (turn signals) are designed to be fitted to the rear of your motorbike. Sold in pairs, they come as standard with both amber and clear lenses.

Can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors. Please see the relevant tail tidy section of our website to find out more.

Note: In some cases, after fitting these indicators, you may find that they flash too ...

R&G Racing's new, road-racing inspired toe guard has been developed for maximum coverage and great looks. Made from aluminium for a lightweight and strong product it features pre-drilled holes attaching to the existing mounts on the swingarm, ensuring effective coverage of the sprocket.

This Racing Toe Guard is compatible with the Yamaha YZF-R6 '17- and YZF-R1 (including YZF-R1M) '15- models.

No modifications to the bike are required to fit this toe guard.

R&G Racing's new, road-racing inspired toe guard has been developed in conjunction with roads hero Ryan Farquhar. Made from lightweight, high-density polyethylene, it features slots for improved positioning and a longer-than-usual kickback, in order to ensure adequate coverage of the sprocket in cases of running a long wheelbase - a typical feature of road racing.

These toe/chain guards are made from ABS Plastic. They look good, can be fitted in less than five minutes and are available in black or carbon look.

These toe/chain guards are made from Aluminium and have a Silver Finish. They are suitable for use with the Yamaha YZF-R6 ’03-’05, Triumph Daytona 675 & Street Triple.

These toe/chain guards are made from Aluminium and have a Silver Finish. They are suitable for bikes with Dual Swingarms.

These toe/chain guards are made from Aluminium and have a Black Finish. They are suitable for bikes with Dual Swingarms.

These toe/chain guards are made from Aluminium and have a Black Finish. They are suitable for use with the Yamaha YZF-R6 ’03-’05, Triumph Daytona 675 & Street Triple.

This yoke plug insert is suitable for the Suzuki DL1000 V-Strom '14-, Suzuki GSX-S 1000 '15-, Suzuki GSX-S 1000FA '15-, Yamaha YZF-R1 '15-, Honda Africa Twin '16- and Africa Twin Adventure Sports '18-.

A "must have" to give that Stem Nut of yours a finished look. Covering the stock Yoke Stem Nut and securing in place thanks to its ribbed design ensures a tight fit that won't fall out or move.

Finished in Black.

Sold as a single.

This upper frame insert is suitable for the Yamaha YZF-R6 '06-'11 models.

This lower frame insert is suitable for the Yamaha YZF-R6 '06- models and fits the lower left-hand side of the bike.

This lower frame insert is suitable for the Yamaha YZF-R6 '06- models.

This frame insert is for the Yamaha YZF-R6 '17, and fits to the left hand side of the bike.

This frame insert is for the Yamaha YZF-R6 '17, and fits to the right hand side of the bike.

Lose your mirrors for that rebellious look or simply to stop your fairings flapping whilst on track days or racing!

Made from HDPE for a fantastic finish, these neat little blanking plates fit over the mounting point for the mirrors and can be fitted in seconds - (comes supplied with bolts for installation).

This product is suitable for the Yamaha YZF-R6 '17- models.

Lose your mirrors for that rebellious look or simply to stop your fairings flapping whilst on track days or racing! Made from aluminium, these neat little blanking plates fit over the mounting point for the mirrors and can be fitted in seconds. (comes supplied with bolts for installation)

This product is suitable for the Yamaha YZF-R6 ('06-'16).

This R&G Fender Extender is compatible with the Yamaha YZF-R1/R1M '15-, YZF-R6 '17- and MT10 '16- models.

R&G Fender Extenders offer additional protection to front-mounted coolers, downpipes and fairing panels from debris, road grit, mud and water kicked up by the front wheel. Attaching to the motorcycle's front mudguard/fender via included adhesive strips and push rivets, installation takes only minutes.

This R&G Fender Extender is compatible with the Yamaha YZF R6 '03-'05, FZ6 '04-'07, FZ6 S2 '07-, FZ8, FZ1 models.

R&G Fender Extenders offer additional protection to front-mounted coolers, downpipes and fairing panels from debris, road grit, mud and water kicked up by the front wheel. Attaching to the motorcycle's front mud guard / fender via included adhesive strips and push rivets, installation takes only minutes.

This R&G Fender Extender is compatible with the Yamaha YZF-R6 '98-'02 models.

R&G Fender Extenders offer additional protection to front-mounted coolers, downpipes and fairing panels from debris, road grit, mud and water kicked up by the front wheel. Attaching to the motorcycle's front mud guard / fender via included adhesive strips and push rivets, installation takes only minutes.

These anodised aluminium paddock stand bobbins are suitable for most Yamahas EXCEPT: Thunderace, TRX, YZF750 (use M10 for these Yamahas).

Supplied in Pairs

These anodised aluminium paddock stand bobbins are suitable for most Aprilia, Triumph and Yamaha models.

Supplied in pairs and available in 3 colour options.

Ideally suited to work with our Elevation series paddock stands.

Please carefully check your bike to ensure the Paddock Stand/Cotton Reel mounts are the correct size before purchasing.

These covers are breathable, soft and elasticated. They can also be spun dry.

Ideal for keeping your pride and joy spotlessly clean over the winter or when put back into indoor after cleaning!

Made from a high quality breathable material that allows the air to constantly travel through.

Available in Black with Silver logo and piping or Red with White logo/piping.

The R&G Superbike Outdoor Cover has been redesigned for 2017 to include many new features. Based off our original award winning design and made of quality waterproof material, the cover also features elasticated rim and Belly straps as standard ensure the cover stays fixed in place and stops wind, mud or water getting up inside the cover and ensure a tight fit around the base. Front and rear chain loops for security devices covered by a velcro® closing flap to ensure the cover is fully waterpro...

R&G Rim Tape is designed specifically for 17" motorcycle wheels. Using only the highest-quality material available R&G's Rim Tape is designed to give years of service!

Available, in a large range of colours and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel w...

At home on any motorcycle from sportsbikes to cruisers, the R&G Modular Centre Tank Pad helps protect the fuel tank on your motorcycle from scratches and unwanted marks from zippers/buckles and general wear and tear with our newly developed 3 piece modular tank pad.

Please note: R&G Tank Traction Grips grips shown on the sides of the tank ARE NOT included but are available separately.

Keep your clutch reservoir protected with our handy Clutch Reservoir Protector (Booty)!

Now available in Black with White logo or Orange with Black logo!

Take care of your helmet with our R&G Racing Deluxe Helmet Bag!Made from a tough, hard-wearing outer and fleece lining, this universal helmet bag protects against dust and light knocks.

Our revolutionary tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike. ** Part does not include Ratchet Straps ** R&G Racing Handlebar Top Straps ST0001BL R&G Racing Handlebar Top Straps, 25mm Ratchet Straps, RG, R&G Racing, bike parts, motorbike supplies

Our revolutionary 25mm tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike. Individual ratchet strap length: 72" (180cm) ** Part does not include top-strap ** 25mm Ratchet Straps ST0699 25mm Ratchet Straps ST0699

R&G Racing Umbrella in silver and black with R&G Logo.

High quality holesaw, suitable for modifying your fairing to take the R&G Crash protector kits that require 28mm holes drilled.

Protect your fuel tank from scratches and unwanted marks from zippers/buckles and general wear and tear with our traditional style tank pad.

Available in Black.

Our Visor Pouch/Protector is compatible with all major brand visors. Ideal for carrying a spare clear visor for when it gets dark or vice versa. Equipped with a high-quality fastex buckle and belt (expandable up to 48 inches) and features a fleece-lined interior to keep your visor in best condition - coupled with a large Velcro closing tab, making the visor easy to get out when needed and ensuring it stays safe and secure when not.


Comes with reflective "R&G" logo and text to help ...

New for 2013 comes our universal mesh flat sheets (sized 16" x 12") available in black, titanium or green finishes to fit almost any radiator size or fill any fairing opening on your bike.

Made from the same high quality mesh found on in our Radiator Guard range, it improves the looks of your bike and help to protect your expensive and vulnerable radiator and other components from flying road debris.

No permanent modifications need to be made to the bike.

Supplied w...

Give your visor that racing look as used by many R&G supported riders in BSB and around the world.

Supplied as a pair.

The R&G “BSB Series” Tank Pad has a unique design and multi-part composition, to help protect fuel tanks from scratches and unwanted marks from zippers/buckles and general wear and tear. Its slimline, modular structure affords comfort and style to any bike, thanks to its flexible 3-piece layout.

Our “BSB Series” Tank Pad is made from the highest quality materials, includes an alcohol wipe and uses Orafol™ adhesive - ensuring that it stays perfectly in place and lasts for years.
<...

Our stylish Roll-Top Rucksack is fully waterproof, extremely durable and very comfortable.

Features of the Rucksack:

Waterproof
Padded shoulder straps and back
Roll-down-top design
Stylish look
Reflective strip across the front
2 external pockets
Secure quick release buckles
High-quality material.

Been there, done that? Now you can have the T-shirt!

Available in Blue or Black.

With R&G Slogans:
"Slip it, slide it, pick it up and ride it..."
or
"Whenever I ride, I use protection...".

Available in Small, Medium, Large or Extra Large.

Stick them on your bike, your car, your garage door, your bedroom wall, your tool box....... Stick them anywhere you like!

This R&G Sticker Sheet consists of 15 individual stickers - 11 black and 4 silver.

Our Aero Knee Sliders are extensively used all over the world, seen on the best riders, best roads and best tracks. They are used by many riders in the British Superbike Championship (amongst others) and race schools worldwide.

Developed with the feedback of racers and road riders alike. we made our latest generation Aero Knee Sliders, from a special blend of composite materials to ensure the riders gets the best overall performance available.

Attaching to your suit via Velcro ...

Similar in design to our industry-leading 'dry' session Aero Knee Sliders which are used all over the world and adorn the best racers’/riders’ leathers! They are extensively used by many riders in the British Superbike Championship (amongst others) and race schools worldwide.

This R&G 'wet' Aero Knee Slider is a much taller version compared to the 'dry' session Aero Knee Slider, offering improved feel and confidence when leant over, especially in wet/damp conditions. They are made from...

These R&G Deluxe leather gloves are reinforced with two layers of leather and two protectors on the palm to prevent damage to your scaphoid bone in the wrist. The thumb and index finger are fitted with a non-slip material, the knuckles are Carbon Fibre reinforced with DuPont™ Kevlar® with padding and are articulated to improve comfort. The long cuff has a padded bottom and a carbon shield on top to protect the ulna (small raised bone at the top of the wrist). The gloves are secured with a single...

You've got your bike protected, now what about your ears!

These DIY moulded ear plugs offer a low cost, re-usable custom moulded earplug in a do it yourself kit.

Made by HEL - Brought to you by R&G.

The HEL Performance brake line fittings offer safety, security and a slimline attractive finish. All hoses are supplied to the FMVSS-106 standard and the kits contain all items required for a complete installation including stainless steel banjo bolts and copper washers.

Spare / replacement amber light bulb for R&G Micro Indicators (turnsignals).

Replacement tail tidy light for tail tidies supplied with the new style R&G light.
PLEASE NOTE THIS IS THE LIGHT UNIT ONLY AND DOES NOT INCLUDE ANY BRACKETS.

Bolt on rectangular red reflector; ideal for numberplates

Supplied in singles only

New to R&G Racing developed specifically to suit our tail tidy range comes our "Reflector Extender" kits. With a large (30mm x 85mm) (E) Marked reflector this kit allows the easy installation of a reflector onto our tail tidies simply screwing into tail

R&G Racing developed its range of Reflector Kits specifically to suit our tail tidy range. With a large (30mm x 85mm) '(E)' Marked reflector this kit allows the easy installation of a reflector onto our tail tidies simply either adhering the plate onto the back of the number plate or using a number plate screw (not included).

Self adhesive Red Reflector; ideal for numberplates.

4cm diameter and is e-marked to be fully legal in UK and Europe.

Supplied in singles only.

Maximise your potential and fine tune your machine to your exact requirements, whether it is a lower more comfortable position, or a higher position giving more ground clearance for track, get the bike set up for you.

Suitable for the Yamaha YZF-R6 '17- models. Compatible for both 'Road' and 'Race' shift patterns. If you wish to use the race shift, it will be necessary to remove the front sprocket cover.

Maximise your potential, tune your machine to your exact requirements. R&G Racing Yamaha YZF-R6 ('06 - '12) Adjustable Rearsets are milled out of lightweight aluminium for high strength and durability. R&G adjustable rearsets provide the option to assemble with racing shift-pattern(1 up - 5 down) or road setup as standard (1 down - 5 up). Our rearsets provide large adjustments and exact positioning to suit every rider (11 positions). Designed to be easily installed. Powdercoated in black with ...

Our Elevation series Paddock Stands are modular for easy disassembly and transportation yet strong and sturdy when assembled.

This model is a Front Paddock Stand and has specially designed adapters on the arms which hook and slot into the underside of the forks legs.

Made from high quality FE360 tubular steel and powder coated black for a superb crisp finish. Coming supplied with 4 high quality red castors wheels for smooth rolling action and extra stability.

Our Elevation series Paddock Stands are modular for easy take down and transportation yet strong and sturdy when assembled.

This model is a Rear Paddock Stand and has specially designed hooks and adjustable arms fully compatible with our cotton reels and spindle sliders.

Made from high quality FE360 tubular steel and powder coated black for a superb crisp finish. Coming supplied with 4 high quality red castors wheels for smooth rolling action and extra stability.

R&G Paddock Stand Hooks allow you to mount your bike onto a Paddock stand with ease. They are designed for use in conjunction with an R&G Paddock Stand. These Hooks are sold in pairs, they're simple to use and, simple to fit. Our Paddock Stand Hooks are easy to locate onto the stand thanks to their enlarged collar design.

These hooks fit the Micron, Champion and Scorpion stands. The diameter of the bar is 12mm.

These paddock stand hooks fit rear stands made by Harris and are designed to be used in conjuntion with our R&G paddock stand bobbins and cotton reels.

These paddock stand pads fit the R&G rear or front paddock stand and are for those bikes where cotton reels or paddock stand bobbins mounts aren't available on the swingarm or Forks without front paddock stand mounts and cant be installed allowing you still to still raise the gear of your bike for essential bike servicing and cleaning.

Sold per pair.

These paddock stand hooks install into the R&G Elevation series FRONT paddock stands, keying into the hole in the bottom of the fork legs to offer a secure, stable and easy to locate lifting point.

Sold in Pairs.

These paddock stand adapters are designed to be used in conjunction with our R&G paddock stand Hooks.

This specific Scorpion Slip on exhaust fits the Yamaha YZF-R6 '06- models onward in the "Power Cone" styles.

Scorpion utilises the latest technologies and extensive R&D in the development and manufacture of its exhausts. Its experience in high-level motorsport, BSB (British SuperBikes), amongst many others allows it to develop high-quality, durable and performance-enhancing products. Utilising aerospace-grade materials such as stainless steel, carbon fibre and titanium in their construc...

This specific Scorpion Slip on exhaust fits the Yamaha YZF-R6 '03-'05 models onward in the "Factory" styles.

Scorpion utilises the latest technologies and extensive R&D in the development and manufacture of its exhausts. Its experience in high-level motorsport, BSB (British SuperBikes), amongst many others allows it to develop high-quality, durable and performance-enhancing products. Utilising aerospace-grade materials such as stainless steel, carbon fibre and titanium in their construc...

This specific Scorpion Slip on exhaust fits the Yamaha YZF-R6 '03-'05 models onward in the "Carbine" styles.

Scorpion utilises the latest technologies and extensive R&D in the development and manufacture of its exhausts. Its experience in high-level motorsport, BSB (British SuperBikes), amongst many others allows it to develop high-quality, durable and performance-enhancing products. Utilising aerospace-grade materials such as stainless steel, carbon fibre and titanium in their construc...

This specific Scorpion Slip on exhaust fits the Yamaha YZF-R6 '06- models onward in the "RP-1 GP" styles.

Scorpion utilises the latest technologies and extensive R&D in the development and manufacture of its exhausts. Its experience in high-level motorsport, BSB (British SuperBikes), amongst many others allows it to develop high-quality, durable and performance-enhancing products. Utilising aerospace-grade materials such as stainless steel, carbon fibre and titanium in their constructio...

Red Dynamic offer an expanding range of stylish Carbon Fibre effect motorcycle fuel cap and yoke protectors. The resin topped carbon fibre effect protectors offer a rich luxury finish whilst adding both style and providing protection from key and keyring damage to those otherwise exposed metal components.

Red Dynamic offer an expanding range of stylish Carbon Fibre effect motorcycle fuel cap and yoke protectors. The resin topped carbon fibre effect protectors offer a rich luxury finish whilst adding both style and providing protection from key and keyring damage to those otherwise exposed metal components.

This particular Red Dynamic Carbon Fibre Yoke Pad is suitable for the Yamaha YZF-R6 '06-'16 models.

This 6-piece Helmet Defender kit adds a layer of protection to certain areas of the helmet, protecting those from helmet bumps when riding with a pillion. As well as scuffs from gloves and general riding wear and tear - Helping keep the helmet in as good condition as possible.

This 6-piece Red Dynamic Helmet Defender kit is universal. The pads can easily be contoured to fit all motorcycle helmets.

Following on from the hugely popular original Denali™ SoundBomb comes the Split SoundBomb. It features the same ear-splitting 120 decibels of sound, but in a much more fitment friendly package. The Denali™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the Split SoundBomb will practically disappear once installed.

Mounting bracket and wiring harness sold separately.

Please...

Producing an massive 113 decibels of sound, the SoundBomb is over twice as loud as a standard motorcycle horn! The Denali™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the SoundBomb will practically disappear once installed.

At 113 decibels, the distinct low-tone sound from the DENALI SoundBomb Mini is over twice as loud as a typical 100 decibel disc horn. Designed to be a direct P...

The DENALI D2 Pods were engineered from the ground up to create the brightest, most efficient, and most durable LED lights. Specifically designed for powersports applications, we focused on generating the most amount of light with the least amount of power draw from your vehicle.

What's In The Box?
(x1) DENALI D2 2.0 LED POD
(x1) M8 Mounting Hardware Kit
(x1) Clear D2 Flood Lens
(x1) Wiring Pigtail

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile. The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic Lens System to give you three unique beam patterns in one kit. Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch. Our DrySeal submersible waterproof construction and Impact PC Bezels create super dur...

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile. The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic Lens System to give you three unique beam patterns in one kit. Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch. Our DrySeal submersible waterproof construction and Impact PC Bezels create super dur...

We are introducing ten new features engineered from the ground up to create the brightest, most efficient, and most durable LED light kits. Specifically designed for powersports applications, we focused on generating the most amount of light with the least amount of power draw from your vehicle. Our 2.0 light kits and accessories provide a complete solution that can handle the most extreme environments.

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile. The all...

We are introducing ten new features engineered from the ground up to create the brightest, most efficient, and most durable LED light kits. Specifically designed for powersports applications, we focused on generating the most amount of light with the least amount of power draw from your vehicle. Our 2.0 light kits and accessories provide a complete solution that can handle the most extreme environments.

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile. The all...

The DENALI D4 Pods were engineered from the ground up to create the brightest, most efficient, and most durable LED lights. Specifically designed for powersports applications, we focused on generating the most amount of light with the least amount of power draw from your vehicle.

What's In The Box?
(x1) DENALI D4 2.0 LED POD
(x1) M8 Mounting Hardware Kit
(x1) Clear D4 True-Hybrid Lens
(x1) Wiring Pigtail

The DENALI DM Pods were engineered from the ground up to create the brightest, most efficient, and most durable LED lights. Specifically designed for powersports applications, we focused on generating the most amount of light with the least amount of power draw from your vehicle.

What's In The Box?
(x1) DENALI DM 2.0 LED POD
(x1) M8 Mounting Hardware Kit
(x1) Clear DM Flood Lens
(x1) Wiring Pigtail

The DENALI DR1 Pods were engineered from the ground up to create the brightest, most efficient, and most durable LED lights. Specifically designed for powersports applications, we focused on generating the most amount of light with the least amount of power draw from your vehicle.

What's In The Box?
(x1) DENALI DR1 2.0 LED POD
(x1) M8 Mounting Hardware Kit
(x1) Clear DR1 True-Hybrid Lens
(x1) Wiring Pigtail

This Amber TriOptic Lens Kit for DM lights is designed to maximize visibility in foggy and rainy conditions. The amber colour of the lens increases visibility in fog and rain by blocking blue frequencies from the light, which reflects off water vapour and decrease vision. The kit includes two spot lenses and two flood lenses. Use two spots for maximum distance, two floods for the maximum spread, or one of each to create a 50/50 True-Hybrid that combines the best of both worlds.

What's ...

This Amber TriOptic Lens Kit for D4 lights is designed to maximize visibility in foggy and rainy conditions. The amber colour of the lens increases visibility in fog and rain by blocking blue frequencies from the light, which reflects off water vapour and decrease vision. The kit includes two spot lenses and two True-Hybrid lenses. Use two spots for maximum distance, two Hybrid lenses for a 50/50 True-Hybrid or one of each to create a Spot-Hybrid that adds some additional close range fill while ...

This DENALI DataDim Dual-Intensity Controller enables the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. All DENALI 2.0 Light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.

What's In The Box?
(x1) DataDim Dual-Intensity Controller
(x1) Dual-Intensity Trigger Wire

This premium DENALI DrySeal ON-OFF Waterproof Switch can handle a load up to 15 Amps and is ideal for controlling many different accessories such as auxiliary lighting. The kit includes both handlebar switch mounting bands, as well as an adhesive pad for surface mounting.

In addition to moulded silicone gasket seals, we use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when...

This Amber TriOptic Lens Kit for DM lights is designed to maximize visibility in foggy and rainy conditions. The amber colour of the lens increases visibility in fog and rain by blocking blue frequencies from the light, which reflects off water vapour and decrease vision. The kit includes two spot lenses and two flood lenses. Use two spots for maximum distance, two floods for the maximum spread, or one of each to create a 50/50 True-Hybrid that combines the best of both worlds.

What's ...

This Amber TriOptic Lens Kit for DR1 lights is designed to maximize visibility in foggy and rainy conditions. The amber colour of the lens increases visibility in fog and rain by blocking blue frequencies from the light, which reflects off water vapour and decrease vision. The kit includes two spot lenses and two True-Hybrid lenses. Use two spots for maximum distance, two Hybrid lenses for a 50/50 True-Hybrid or one of each to create a Spot-Hybrid that adds some additional close range fill while...

An all-purpose cleaner (500ml bottle) designed to quickly cut through traffic film and road grime on your bike. Formulated to leave a great finish and is safe to use on paintwork, plastic, rubber, aluminium, chrome, carbon fibre and disc pads – basically all over the bike! Simply spray on and rinse off. Cleans in minutes!

FEATURES AND BENEFITS
• Rapidly cuts through dirt and grime.
• Fully biodegradable.
• Water-based and solvent free.
• Low odour.
• Contains no harm...

A colourless fully synthetic lubricant with strong adhesive properties designed for high speed, high stress applications such as motorcycle chains. Initial low viscosity allows for penetration into links before the product rapidly thickens to help prevent throw-off. Regular use helps maintain the performance and life of your chain.

FEATURES AND BENEFITS
• Long lasting lubrication.
• Fully synthetic.
• Contains Extreme Pressure and Anti Wear additives for improved load resist...

Designed to leave your bike with a deep glossy shine. The formula contains Carnauba Wax, one of the hardest naturally occurring waxes, which provides a wet look finish and long lasting shine. It’s great for repelling water, allowing it to bead off paintwork to maintain a fantastic finish for longer. It’s easy to apply and streak free.

FEATURES AND BENEFITS
• Contains Carnauba Wax for durability and fantastic finish
• Contains Bees Wax for improved shine and ease of application. ...

GT85® is a tried and tested multi-purpose lubricant, with multiple uses to help complete tasks around the home and at work. No matter how big or small the project, GT85® gives you everything you need all in one can.

Product Benefits
Loosens rusted parts
Prevents squeaking
PTFE formula helps lubricate
Drives out moisture from electrical systems
Fast acting cleaner
Versatile and easy to use
Product Uses
Lubricating and cleaning
Driving out moisture from...

A white calcium grease based lubricant with strong adhesive properties designed for high speed, high stress applications such as motorcycle chains. It applies wet enabling penetration into links before thickening. Providing lasting lubrication and protection for your chain (O, X, Z ring compatible). Its exceptional long lasting action makes it particularly suitable for dry conditions. It’s also quick drying and provides outstanding anti-fling properties. Regular use helps maintain the performanc...

Easy to use, WD40 Chain Cleaner and quickly removes dirt, grime, dust and oil from chains. Compatible with O, X and Z ring chains the formula blasts off contaminants and dries in minutes. A water dispersible degreaser designed to solubilise newly deposited, oxidized or aged greases and oils. Suitable for subsequent removal by rinsing with cold water. Regular cleaning helps to reduce wear on the chain to maintain performance for longer.

FEATURES AND BENEFITS
• Softens and solubilises...

Designed to give an all over great shine to your bike. The fast evaporating formula acts quickly and is easy to apply with no need to buff. Its light and fruity fragranced polish for internal and external automotive non-porous surfaces. Can also be used as a light duty lubricant for metal, plastic and rubber parts. Ideal for Rubber Parts, Paintwork, Carbon Fibre Parts and Metals

FEATURES AND BENEFITS
• Freshens and shines.
• Reduces friction.
• helps prevent cracking / prema...

Designed to quickly remove brake dust, dirt, oil, and brake fluid from brake and clutch systems. The fast working formula dries in minutes and leaves no residue. Regular cleaning helps brake discs and pads last longer.

FEATURES AND BENEFITS
• High pressure jet aperture for precise application into areas of difficult accessibility.
• 360° valve allows inverted use, where required, for awkward areas of application.
• High discharge rate provides “flush” washing properties.

An all-purpose cleaner (1 Litre bottle) designed to quickly cut through traffic film and road grime on your bike. Formulated to leave a great finish and is safe to use on paintwork, plastic, rubber, aluminium, chrome, carbon fibre and disc pads – basically all over the bike! Simply spray on and rinse off. Cleans in minutes!


FEATURES AND BENEFITS
• Rapidly cuts through dirt and grime.
• Fully biodegradable.
• Water-based and solvent free.
• Low odour.
• Contains ...

The Speed Angle APEX GPS Lap timer is an essential accessory for any racer or trackday rider, the data it collects helps riders to analyze their riding style easily, and provide an efficient way to improve the riding skill. You can easily overlay your logs and GPS tracking data onto Google Earth and have your rides replayed 3-dimensionally on the satellite photo images of the track. There is no limit to the tracks that can be overlaid onto (as long as they are available on Google Earth). You can...

This specific BMC Air Filter has been made for the Yamaha YZF-R6 '03-'09 models.

100% handmade in Italy, BMC filters are trusted by almost every high-level automotive and endurance team in racing - a testament to their quality. They are used by such teams as the Yamaha Factory team (MotoGP), Pata Yamaha Official (WSBK),
plus many other top teams in WSS, BSB, BSS and more!

The knowledge and experience gained on track is transferred directly to streetbike variants in order t...

This specific BMC Air Filter has been made for the Yamaha YZF-R6 '98-'02 models.

100% handmade in Italy, BMC filters are trusted by almost every high-level automotive and endurance team in racing - a testament to their quality. They are used by such teams as the Yamaha Factory team (MotoGP), Pata Yamaha Official (WSBK),
plus many other top teams in WSS, BSB, BSS and more!

The knowledge and experience gained on track is transferred directly to streetbike variants in order t...

This specific BMC Air Filter has been made for the Yamaha YZF-R6 '06-'07 models.

100% handmade in Italy, BMC filters are trusted by almost every high-level automotive and endurance team in racing - a testament to their quality. They are used by such teams as the Yamaha Factory team (MotoGP), Voltcom Crescent Suzuki (WSB),
plus many other top teams in WSS, BSB, BSS and more!

The knowledge and experience gained on track is transferred directly to streetbike variants in order...

This specific BMC Air Filter has been made for the Yamaha YZF-R6 Full kit with Air Flow Restrictor '08-'09 models.

100% handmade in Italy, BMC filters are trusted by almost every high-level automotive and endurance team in racing - a testament to their quality. They are used by such teams as the Yamaha Factory team (MotoGP), Pata Yamaha Official (WSBK),
plus many other top teams in WSS, BSB, BSS and more!

The knowledge and experience gained on track is transferred directly...

This specific BMC Air Filter has been made to their Competition/Race Standards to allow maximum airflow through the filter for best engine performance, for the Yamaha YZF-R6 '03-'09 models.

100% handmade in Italy, BMC filters are trusted by almost every high-level automotive and endurance team in racing - a testament to their quality. They are used by such teams as the Yamaha Factory team (MotoGP), Pata Yamaha Official (WSBK),
plus many other top teams in WSS, BSB, BSS and more!

This specific BMC Air Filter has been made to their Competition/Race Standards to allow maximum airflow through the filter for best engine performance, for the Yamaha YZF-R6 '06-'07 models.

100% handmade in Italy, BMC filters are trusted by almost every high-level automotive and endurance team in racing - a testament to their quality. They are used by such teams as the Yamaha Factory team (MotoGP), Voltcom Crescent Suzuki (WSB),
plus many other top teams in WSS, BSB, BSS and more! ...

This specific BMC Air Filter has been made to their Competition/Race Standards to allow maximum airflow through the filter for best engine performance, for the Yamaha YZF-R6 Full kit with Air Flow Restrictor '08-'09 models.

100% handmade in Italy, BMC filters are trusted by almost every high-level automotive and endurance team in racing - a testament to their quality. They are used by such teams as the Yamaha Factory team (MotoGP), Pata Yamaha Official (WSBK),
plus many other top te...

This specific BMC Air Filter has been made to their Competition/Race Standards to allow maximum airflow through the filter for best engine performance, for the Yamaha YZF-R6 '06-'07 models.

Please note this filter is for track use only, and does not come with an airflow restrictor

100% handmade in Italy, BMC filters are trusted by almost every high-level automotive and endurance team in racing - a testament to their quality. They are used by such teams as the Yamaha Factory tea...

This specific BMC Air Filter has been made to their Competition/Race Standards to allow maximum airflow through the filter for best engine performance, for the Yamaha YZF-R6 Full kit without Air Flow Restrictor '08 onwards models.

Please note this filter is for track use only, and does not come with an airflow restrictor

100% handmade in Italy, BMC filters are trusted by almost every high-level automotive and endurance team in racing - a testament to their quality. They are use...

This specific BMC Air Filter has been made for the Yamaha YZF-R6 '10- Models.

100% handmade in Italy, BMC filters are trusted by almost every high-level automotive and endurance team in racing - a testament to their quality. They are used by such teams as the Yamaha Factory team (MotoGP), Pata Yamaha Official (WSBK),
plus many other top teams in WSS, BSB, BSS and more!

The knowledge and experience gained on track is transferred directly to streetbike variants in order to o...

This specific BMC Air Filter has been made to their Competition/Race Standards to allow maximum airflow through the filter for best engine performance, for the Yamaha YZF-R6 '10- Models.

100% handmade in Italy, BMC filters are trusted by almost every high-level automotive and endurance team in racing - a testament to their quality. They are used by such teams as the Yamaha Factory team (MotoGP), Pata Yamaha Official (WSBK),
plus many other top teams in WSS, BSB, BSS and more!
...

Revolutionary all-surface treatment spray-on / wipe-off cleaning & protective solution which makes cleaning your motorcycle and keeping it clean easy!

Repelling water, oil and dirt from any surface of your bike that the Nano spray is applied to as well as preventing sun oxidisation and paint fade, ensuring your bike looks its very best for years!

Comes pre-mixed for easy, ready-to-apply application in an easy-to-use (200ml / 6.76 fl oz) spray bottle and includes a quality micro...

OK, it may look just like a normal sponge or be it cut into a cute looking V shape but that's where the similarity ends between the V2 Sponge™ and the thing that you use to clean the dishes!

The incredible V2 Sponge™; Unlike a normal sponge or cleaning cloth whose fibres just slide over the muck that's left on your visor, The V2 Sponge actually cut into it like little cheese wires and lift it away. Whilst ruthless at removing bug debris the V2 won't damage a visors Anti-Scratch treatmen...

We've all fallen victim to a painful/numb rear end after a long day in the saddle! Wild Ass air seat cushions help fix that discomfort and are available in a range of styles and finishes, from cruisers to supersport! Spreading the rider's weight across the entire cushioned area helps eliminate painful pressure points from forming and promotes blood circulation by utilising pressure adjustable interconnected air cells.

We've all fallen victim to a painful/numb rear end after a long day in the saddle! Wild Ass air seat cushions help fix that discomfort and are available in a range of styles and finishes, from cruisers to supersport! Spreading the rider's weight across the entire cushioned area helps eliminate painful pressure points from forming and promotes blood circulation by utilising pressure adjustable interconnected air cells.

We've all fallen victim to a painful/numb rear end after a long day in the saddle! Wild Ass air seat cushions help fix that discomfort and are available in a range of styles and finishes, from cruisers to supersport! Spreading the rider's weight across the entire cushioned area helps eliminate painful pressure points from forming and promotes blood circulation by utilising pressure adjustable interconnected air cells.

Replace damaged or corroded Center Stem/Yoke Nuts with more colourful options! Made of high tensile anodised aluminium.

Available in a range of coloured anodised Aluminium options, RD Moto Oil Filler Cap directly replace the OE oil cap with a more colourful and stylish variant. Installation and tightening is a breeze thanks to the hex key/Allen key socket atop the cap and they include a replacement O ring seal to ensure a perfect seal.

This RD-Moto Oil Filler Cap (sized M27x3.0) is suitable for the Yamaha YZF-R1, YZF-R6, MT07 (FZ-07) and MT10 models (see application list above for more compatible bikes).