Shop By BikeSetting the standard in crash protection and bolt-on motorcycle accessories.
You're viewing All Products for Yamaha - YZF-R1 (2020)
Showing all 81 results
This 5-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go through a PVD (physical vapour deposition) treatment, ensuring longevity and corrosion resistance.
• Only use Manufacturer torque settings, between 33 - 45nm.
• Kits are offered as bike-specific fitments. If you have a variation of a standard model you may require an alternative kit. ...
R&G Second Skin Tank Protection kit is a non-yellowing (UV Stable), ultra-tough, easy-to-apply, polyurethane protective film. Designed to protect the paint against rubbing from clothing & motorcycle leathers.
R&G Second Skin Tank Protection kit is easy to install when used in conjunction with the advanced fitting solution (included). R&G Second Skin Tank Protection kit is extremely conformable around compound curves of modern motorcycle tanks, making it simple to fit, even at home.
These crash protectors feature our stylish, aerodynamic Aero Bobbins and are available with Black and White bobbins. Suitable for the Yamaha YZF-R1/R1M '15- models.
Utilising specially designed spacers allowing for an easy, hassle-free installation, putting the protection exactly where it's needed for maximum effectiveness.
R&G Aero Bobbins from R&G - the market leaders in crash protection and the only insurance-approved crash protectors on the market. As used by some of the wo...
Radically tidy up the rear end of the Tail Tidy for Yamaha YZF-R1/ R1M '15- with this R&G Tail Tidy.
R&G tail tidy unit is easy to fit and will radically transform the rear end of the bike, removing the expansive (and often ugly!) OEM licence plate holders - replacing them with a much sleeker looking unit.
R&G Radiator Guards are made from aluminium, improve looks and protect your expensive and vulnerable radiator from flying debris.This radiator guard is suitable for Yamaha YZF-R1/R1M '15- and MT-10 '16- & SP '17- models.
Available for the Yamaha YZF-R1/R1M '15-, this R&G Titanium oil cooler guard is both lightweight and super strong, thanks to its real Titanium (ASTM B265 Grade 1) mesh construction encased in a seamless aluminium frame.
This specific R&G radiator guard is made from an expanded ASTM B265 Grade 1 Titanium sheet and features a neat, seamless aluminium frame, securely holding the guard in place (utilising existing mounting or brackets).
Made in the UK
Please note: Only the...
R&G Oil Cooler Guards are available in a black, Titanium or Dark Blue finish. They are made from pressed aluminium and feature a neat, seamless frame. They improve the looks of your bike and help to protect your expensive and vulnerable oil cooler from flying debris.No permanent modifications need to be made to the bike.This oil cooler guard is suitable for the lower mounted oil cooler found on the Yamaha YZF-R1/R1M '15- models.
Please note this product is only the oil cooler, Radiator...
The R&G Stainless Steel Oil Cooler Guard series is a more rugged version of our existing aluminium guard.
Constructed from 1mm stainless steel sheet allows the guard to be incredibly strong and impervious to rust – perfect for bikes and riders who may tackle demanding terrains and conditions.
The laser-cut grills are designed for maximum airflow to the Oil Cooler so that cooling isn't compromised; the Oil Cooler Guard is as good looking as it is purposeful.
This oil c...
The R&G Stainless Steel Radiator Guard series is a more rugged version of our existing aluminium offering and are aimed particularly for Adventure and Touring bikes.
Constructed from 1mm stainless steel sheet allows the guard to be incredibly strong and impervious to rust – perfect for bikes and riders who may tackle demanding terrains and conditions.
The laser-cut grills are designed for maximum airflow to the radiator so that cooling isn't compromised; the Radiator Guard is...
This specific Race Series Engine Case Cover is compatible with the Yamaha YZF-R1/R1M '15- models protecting the Left Hand Side Engine Casing from damage in the event of a crash, drop or slide.
R&G Race Series Engine Case Covers have been specifically developed in collaboration with selected high level race teams and crash tested in BSB level racing events to ensure they meet and exceed all required standards for case protection.
In addition to the existing R&G Engine Case Cover...
This specific Race Series Engine Case Cover is compatible with the Yamaha YZF-R1/R1M '15- and MT-10 '16- & SP '17- models protecting the exposed Right Hand Side Oil Pump Casing from damage in the event of a crash, drop or slide.
R&G Race Series Engine Case Covers have been specifically developed in collaboration with selected high level race teams and crash tested in BSB level racing events to ensure they meet and exceed all required standards for case protection.
In addition t...
This specific Race Series Engine Case Cover is compatible with the Yamaha YZF-R1/R1M '15 models protecting the exposed Right Hand Side Clutch Casing from damage in the event of a crash, drop or slide.
R&G Race Series Engine Case Covers have been specifically developed in collaboration with selected high level race teams and crash tested in BSB level racing events to ensure they meet and exceed all required standards for case protection.
In addition to the existing R&G Engine Ca...
Suitable for the Yamaha YZF-R1/R1M '15- Left Hand Engine Casing.
Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Series for use in any competition sanctioned by these Organisations. This approval means that race...
Suitable for the Yamaha YZF-R1M '15- and MT-10 '16- & SP '17- Right Hand Oil Pump Casing.
Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Series for use in any competition sanctioned by these Organisations. This...
Suitable for the Yamaha YZF-R1/R1M Right Hand Clutch Cover Casing found on the 2015 onward models.
Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Series for use in any competition sanctioned by these Organisati...
Suitable for the Yamaha YZF-R1 2015-.Our industry leading race series engine case covers are now available in kit form containing all the engine case covers R&G offer for your bike in one go. Developed on track and brought to the road, R&G Engine Case Covers bring BSB and MotoAmerica Series approved levels of engine cover protection to your bike for complete peace of mind.
Made in the U.K.
Our industry leading engine case covers are now available in kit form containing all the engine case covers R&G offer for your bike in one go. Developed on track and brought to the road our engine case covers are made from 4mm polypropylene for strength, durability and good looks, they complement our other crash protection perfectly and come approved by the California Superbike School (www.superbikeschool.co.uk).
Suitable for the Yamaha YZF-R1 2015-.
This kit includes 3 ...
This engine case slider, specially designed to protect for the right hand side engine casings of the Yamaha YZF-R1/R1M '15- and Yamaha MT-10 (FZ-10) '16- & SP '17- models in the event of a crash or slide.
This product fits neatly and easily to the existing engine case and will provide additional protection in the event of a drop.
Fits the right hand side only (left hand side available separately - ECS0094BK (for YZF-R1) or ECS0111BK (for MT-10)).
Designed using the ve...
This engine case slider for the left hand side of the Yamaha YZF-R1/R1M '15- models.
This product fits neatly and easily to the existing engine case and will provide additional protection in the event of a drop.
Fits the left hand side only (right hand side available separately - ECS0095BK).
Designed using the very latest in 3D scanning and printing technology to ensure an exact fit, the product is made from HDPE (Black), the same material as used in our industry lead...
These bar end protectors have been specially designed and developed for the Yamaha YZF-R1/R1M 2015 onwards models.
Helping to protect expensive levers and clipons from damage in the event of a drop or crash or slide.
Easy to install they simply screw into place taking only seconds.
This Kaoko Throttle Stabilizer kit is designed to fit the Yamaha FJR1300(all year models), YZFR1 (2004-2015), YZFR6 (all year models).
Improve your vision, confidence and safety all year round while you ride!
This ground-breaking product enables you to WASH your visor while on the bike.
Unique wash/wipe action that’s incredibly easy to use: 1. Fill the tank with Visorcat wash (supplied). 2. Wash by moving Visorcat across your visor one way. 3. Wipe the residue away by moving Visorcat across your visor in the other direction. The result is 100% clear vision in all conditions. Keep the sponge clean by rinsing i...
The all-new R&G Second Skin Dashboard Protection kit is made from high quality, anti-scratch material. This bespoke screen protector kit has been designed to protect the delicate dashboard screen on your bike from unwanted scratches and marks.
Kit includes detailed instructions to aid in the dashboard protector placement, 2x dashboard protectors (1x spare), mini spray bottle, suede polishing cloth, wet & dry wipe, squeegee and dust removal strip.
R&G Second Skin stone chip protection film is a non-yellowing (UV Stable), ultra-tough, easy-to-apply, polyurethane protective film. Designed to protect your road or track motorcycle from stone chips, road salt, tar, abrasions, fairing stress fractures and bodywork/fuel tank scratches from general use. The unique properties of our protection film enable it to disperse the impact energy of gravel and small stones, bouncing them off and leaving your bodywork untouched beneath.
Our all-new version of the R&G Brake Lever Guard kit can be fitted to the brake and comes with our universal fitting kit, its expanding design clamps to the inside of the clipon/handlebar (13-21mm diameter) and is available in a range of colour options.
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, MotoAmerica) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch l...
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filters; again potentially causing front brake engagement.
This R&G Moulded Lever Guard kit can be fitted to either the brake or clutch sides and comes with our universal fitting kit, its expanding design clamps to the inside of the clipon/handlebar (13-21mm diameter) and is available in a range of colour options.
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch l...
R&G Offset Cotton Reels directly replace the OE chain adjusters on the rear swingarm, off-setting the cotton reel mounting point from installed directly into the swingarm, instead into a specially machined metal bracket. Offering the best of both worlds in terms of crash protection and functionality with the ability to use the R&G Offset Cotton Reels bobbins as paddock stand bobbins for tyre/chain maintenance as well as offering crash protection to the rear wheel components.
Specially d...
Cotton ReelsCR0002BK, CR0002WH, CR0002OR
These cotton reels mount directly into the mounting points on the rear swingarm offering the best of both worlds in terms of crash protection and functionality with the ability to use R&G cotton reels, which offer excellent crash protection to those components located towards the rear as well as the ability to lift up the rear of the bike with a paddock stand for maintenance and tyre changes.
Available in Black, White or Orange.
Sold in Pairs.
These fork protectors are suitable for the Yamaha YZF-R1/R1M '15-, YZF-R6 '17- and Yamaha MT-10 '16- & SP '17- models.
Easy to install, they help to eliminate damage to the front forks, fork bottoms and brake callipers during a crash or drop.
These Swingarm Protectors, for Yamaha YZF-R1 '09- / YZF-R1M ’15- / YZF-R6 '06-'17- models, fit into the rear spindle and expand to a snug fit, looking great and protecting the swingarm. They are held in place by means of their expanding design, meaning installation is very simple. They help protect the core, expensive components found around the swingarm area, such as the brake calliper, disc, sprocket and the swingarm itself!
This 4 piece R&G Tank Traction Grips have been specially designed for the Yamaha YZF-R1/ R1M '20- model.
R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking.
This Boot Guard kit has been specially designed for the Yamaha YZF-R1/R1M '15- models.
R&G Boot Guard kits are available for a large range of bike styles and brands, with new applications released regularly. The unique R&G texture was specifically designed to be durable, providing the rider with a buffer between his boot on the exposed areas of the swingarm which can (on occasion) come into contact with each other during cornering causing wear and unwanted damage to the swingarm or boot...
Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.
Patent No: GB2459728
This Tank Slider (pair) kit is compatible with the Yamaha YZF-R1/R1M '15-.
As used by the California Superbike School. (http://www.superbikeschool.com/)
Our Tank Sliders are made from Carbon fibre reinforced with DuPont™ Kevlar®, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tank, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.
Made in the U.K.
...
This Tail Slider kit is compatible with the Yamaha YZF-R1 '15-/R1M '15-'19.
As used by the California Superbike School. (http://www.superbikeschool.com/)
Our Tail Sliders are made from Carbon fibre reinforced with DuPont™ Kevlar®, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tail, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.
Made in the U.K
...
Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.
A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.
Suitable for the Yamaha YZF-R1/R1M '15-, Yamah...
Once you have removed the pillion footrests, fill the void left behind and cover those otherwise exposed holes in the sub-frame with the R&G blanking plates.
This pair of Footrest Blanking Plates have been specially designed to cover/protect both side of the Yamaha R1/ R1M '20-.
R&G Footrest Blanking Plates are easy to install, simply screwing into place in-place of the rear pillion pegs, covering those otherwise exposed sub-frame holes, that if left uncovered could result in ...
This particular model fits the Yamaha YZF-R1/R1M '15- and MT-10 '16- & SP '17- models.
Never forget your sidestand puck again!
Kickstand Shoes bolt onto the bottom of the sidestand, to enlarge the original’s footprint by up to 100%, significantly spreading the load placed upon it, to help prevent the stand ‘piercing’ the ground. Despite this enlargement, the Shoe does not affect ground clearance or interfere with the chain run during normal riding.
R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.
If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors.
In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0002 (see related products below) - in some cases more than one resister must be used inline.
Supplied as a pair
The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators for the following manufacturers: Honda, Kawasaki & Yamaha.
Please check the existing Indicator Relay where possible before ordering - if you are still unsure please ask your local dealer.
R&G Racing's new, road-racing inspired toe guard has been developed for maximum coverage and great looks. Made from aluminium for a lightweight and strong product it features pre-drilled holes attaching to the existing mounts on the swingarm, ensuring effective coverage of the sprocket.
This Racing Toe Guard is compatible with the Yamaha YZF-R6 '17- and YZF-R1 (including YZF-R1M) '15- models.
No modifications to the bike are required to fit this toe guard.
R&G Racing's road-racing inspired toe guard has been developed and designed to give maximum protection combined with great looks. Made from aluminium for a lightweight and strong product it features pre-drilled holes attaching to the existing mounts on the swingarm, ensuring effective coverage of the sprocket.
This racing Toe Guard is compatible with the Yamaha YZF-R1/R1M '15-, R25 '14-, MT-25 '15-, MT-10 '16- & SP '17-, MT-03 '15- and the R3 '15- models.
No modifications to ...
This frame plug kit fits neatly into the lower frame hole found on the right hand side of the Yamaha YZF-R1/R1M '15- and Yamaha MT-10 '16- & SP '17-.
.
Protecting it from road grime, mud and debris build up, these neat inserts really clean up the look of the stock bike.
This frame plug fits neatly into the upper frame holes found on either the left or right hand sides of the Yamaha YZF-R1/R1M '15- and MT-10 '16- & SP '17- models.
Sold Singularly - Please order two if you want to cover both frame holes.
This frame plug kit fits neatly into the lower frame hole found on the left hand side of the Yamaha YZF-R1/R1M '15- and MT-10 '16- & SP '17- models.
Protecting it from road grime, mud and debris build up, these neat inserts really clean up the look of the stock bike.
This Top Yoke Cap is suitable for the Suzuki DL1000 V-Strom '14-, Suzuki GSX-S 1000 '15-, Suzuki GSX-S 1000FA '15-, Yamaha YZF-R1 '15-, Honda Africa Twin '16-, Africa Twin Adventure Sports '18- and CRF1100L Africa Twin Standard Model '20-.
A "must have" to give that Stem Nut of yours a finished look. Covering the stock Yoke Stem Nut and securing in place thanks to its ribbed design ensures a tight fit that won't fall out or move.
Finished in Black.
Sold as a single.
Lose your mirrors for that rebellious look or simply to stop your fairings flapping whilst on track days or racing!
These stylish R&G Mirror Blanking Plates improve the looks of your bike by covering up the otherwise exposed mounting points from the mirrors.
This product is suitable for the Yamaha YZF- R1/ R1M '20- models.
This R&G Fender Extender is compatible with the Yamaha YZF-R1 '15-/R1M '15-'19, YZF-R6 '17- and MT10 '16- & SP '17- models.
R&G Fender Extenders offer additional protection to front-mounted coolers, downpipes and fairing panels from debris, road grit, mud and water kicked up by the front wheel. Attaching to the motorcycle's front mudguard/fender via included adhesive strips and push rivets, installation takes only minutes.
R&G Chain Cleaner quickly removes all containments from your chain. Our formula breaks down even the toughest grime for easy, stress-free cleaning. For added cleaning power, consider using a brush to agitate contaminants before rinsing.
R&G Motorcycle Degreaser effectively removes built-up grime from your machine. Safe to use on metal, plastic and rubber, our specialised formula will cut through even the toughest grime, leaving a clean, 'like-new' finish. For added cleaning power, consider using a brush to agitate contaminants before rinsing.
R&G Disk Brake Cleaner can improve overall braking performance while prolonging the life of you brake discs and pads. Our formula is specially designed to remove brake dust, oil and any other contaminants that may affect braking performance.
R&G Silicone Shine leaves your machine looking as good as it did right from the factory. Our formula guarantees a deep, grime resistant shine.
R&G Helmet Fresh completely eradicates all odour from inside your helmet, leaving a fresh 'new helmet scent' every time! Our fast-drying formula will leave your helmet fresh and bacteria-free for those long rides. R&G Helmet Fresh is suitable for use on all fabrics. Why not try it on your gloves or clothing?
R&G Nano Bike Wash effortlessly breaks down and removes all dirt, grime and contaminants that may be on your machine after the hardest rides. Our specially-created formula biodegradable formula makes cleaning your machine a pleasure and leaves it looking its best!
R&G Nano Bike Wash effortlessly breaks down and removes all dirt, grime and contaminants that may be on your machine after the hardest rides. Our specially-created formula biodegradable formula makes cleaning your machine a pleasure and leaves it looking its best!
R&G Waterlesss Bike Wash is the easiest way to remove light contaminants from your machine between major washes. Our special formula effortlessly cleans all surfaces - with no water necessary! It leaves a streak-free, non-sticky, high shine from just one application.
R&G Anti-fog Solution prevents your vision from being obscured while on the go! Our formula creates a super-thin, transparent nanolayer to prevent your visor, goggles and eyewear from fogging up.
R&G Helmet & Visor Cleaner quickly removes all contaminants from helmets, visors and eyewear, Our specially-created PH-neutral formula is safe to use on all helmets and is fully biodegradable.
R&G Everyday Chain Lube offers maximum protection for your chain over long distances, in all weathers. Our formula penetrates deep into the chain links, offering extreme lubrication with no fling. Suitable for both road and off-road use. for easy removal, after you ride, use R&G Nano Bike Wash and Chain Cleaner.
R&G Dry Chain Lube provides the ultimate protection for your chain in dry and dusty conditions. Our wax-based formula ensures maximum lubrication while not attracting dirt and grit for a clean ride. For easy removal after your ride, use R&G Nano Bike Wash and Chain Cleaner.
R&G Wet Chain Lube provides the ultimate protection for your chain in the harshest conditions imaginable. Our super sticky formula penetrates deep into the chain links offering extreme lubrication no matter how wet the ride. For easy removal after your ride, use R&G Nano Bike Wash and Chain Cleaner.
These anodised aluminium paddock stand bobbins are suitable for most Aprilia, Triumph and Yamaha models.
Supplied in pairs and available in 3 colour options.
Ideally suited to work with our Elevation series paddock stands.
Please carefully check your bike to ensure the Paddock Stand/Cotton Reel mounts are the correct size before purchasing.
The R&G Superbike Outdoor Cover has been redesigned for 2017 to include many new features. Based off our original award winning design and made of quality waterproof material, the cover also features elasticated rim and Belly straps as standard ensure the cover stays fixed in place and stops wind, mud or water getting up inside the cover and ensure a tight fit around the base. Front and rear chain loops for security devices covered by a velcro® closing flap to ensure the cover is fully waterproo...
R&G Heat Shield has been specifically designed to protect components from the damaging effects of radiant heat. It features a composite construction of aluminium foil, silicone adhesive, glass cloth and flame resistant polyurethane, optimising barrier performance up to 500 degrees C, with minimal weight and material thickness. Presented in a self-adhesive format making it simple to install.
It has a higher than average 20mu aluminium foil face making it extremely durable and resilient e...
The all-new R&G transparent PPE face shield can effectively block harmful substances to protect your entire face.
R&G Knee Sliders have been put to the test extensively around the world, from the British Superbike Championship to top race schools, our Knee Sliders are trusted by many riders on many tracks and Roads. R&G Factory GP Knee Sliders are designed with the track enthusiast in mind. Developed in partnership with some of the best British Superbike riders, our Factory GP Knee Sliders feature a new, harder-wearing compound for increased durability and a wide rear profile, to offer a
maximum range o...
Maximise your potential and fine tune your machine to your exact requirements, whether it is a lower more comfortable position, or a higher position giving more ground clearance for track, get the bike set up for you.
Suitable for the Yamaha YZF-R1/R1M '15-. Compatible in 'Road' shift only.
Milled out of lightweight aluminium for high strength and durability. R&G Rearsets provide a large range of adjustment to exactly position and tailor to suit every rider (11 positions).
Our Elevation series Paddock Stands are modular for easy disassembly and transportation yet strong and sturdy when assembled.
This model is a Front Paddock Stand and has specially designed adapters on the arms which hook and slot into the underside of the forks legs.
Made from high quality FE360 tubular steel and powder coated black for a superb crisp finish. Coming supplied with 4 high quality red castors wheels for smooth rolling action and extra stability.
Our Elevation series Paddock Stands are modular for easy take down and transportation yet strong and sturdy when assembled.
This model is a Rear Paddock Stand and has specially designed hooks and adjustable arms fully compatible with our cotton reels and spindle sliders.
Made from high quality FE360 tubular steel and powder coated black for a superb crisp finish. Coming supplied with 4 high quality red castors wheels for smooth rolling action and extra stability.
R&G Paddock Stand Hooks allow you to mount your bike onto a Paddock stand with ease. They are designed for use in conjunction with an R&G Paddock Stand. These Hooks are sold in pairs, they're simple to use and, simple to fit. Our Paddock Stand Hooks are easy to locate onto the stand thanks to their enlarged collar design.
The T3 is a unique and innovative approach to the common turn signal blending white visibility lighting, red brake lighting, and amber turn signal lighting into one modular system. The front T3 turn signal pods feature super bright white running lights that switch to amber when your turn signal is activated, while the rear T3 signal pods feature super bright red LEDs for run and brake functionality that also switch to amber when your turn signal is activated. Unlike other switchback turn signals...
The T3 is a unique and innovative approach to the common turn signal, blending white visibility lighting, red brake lighting and amber turn signal lighting into one modular system. The front T3 turn signal pods feature super bright white running lights that switch to amber when your turn signal is activated, while the rear T3 signal pods feature super bright red LEDs for run and brake functionality that also switch to amber when your turn signal is activated. Unlike other switchback turn signals...
The T3 is a unique and innovative approach to the common turn signal, blending white visibility lighting, red brake lighting and amber turn signal lighting into one modular system. The front T3 turn signal pods feature super bright white running lights that switch to amber when your turn signal is activated, while the rear T3 signal pods feature super bright red LEDs for run and brake functionality that also switch to amber when your turn signal is activated. Unlike other switchback turn signals...
DENALI T3 Modular Switchback Signal Pods | Rear with License Plate Mounting Kit
These unique turn signals were designed in collaboration with Analog Motorcycles to create the smallest possible turn signal that could still put out a significant amount of light. These signals are specifically designed for custom and sports applications where riders want a super low profile look but don't want to sacrifice functionality. Each pod features two high-power 3 watt LEDs packed into a durable cast aluminium housing coated in a satin black powder coat finish. Don't let their small si...
DENALI Micro Turn Signal Spacer Kit
The T3 is a unique and innovative approach to the common turn signal, blending white visibility lighting, red brake lighting and amber turn signal lighting into one modular system. The front T3 turn signal pods feature super bright white running lights that switch to amber when your turn signal is activated, while the rear T3 signal pods feature super bright red LEDs for run and brake functionality that also switch to amber when your turn signal is activated. Unlike other switchback turn signals...
WD-40 Smart Straw is the same reliable Multi-Use Product, specially designed for precision application. The Smart Straw applicator is great for reaching those tight spaces in gears and mechanisms.
The clever design also incorporates Spray 2 Ways technology. Simply flip the Smart Straw down against the can, and the wide spray nozzle is still at your disposal should you need greater coverage.
What WD-40 Smart Straw does:
360° valve allows for upright or upside down applicatio...
RD Moto Paddock Stand Bobbins RDM-EM10B, RDM-EM10G, RDM-EM10K, RDM-EM10N, RDM-EM10O, RDM-EM10R, RDM-EM10S, RDM-EM125B, RDM-EM125G, RDM-EM125K, RDM-EM125N, RDM-EM125O, RDM-EM125R, RDM-EM125S, RDM-EM6B, RDM-EM6G, RDM-EM6K, RDM-EM6N,
RDMoto Paddock Stand Bobbins are available in a range of style and size options to fit most bike models and allows the use of a hook equipt paddock stand to lift the rear of the motorcycle off the ground to aid in tyre changes and motorcycle chain and wheel maintenance.
Available in a range of colour options to suit your bike including: Blue, Gold, Black, Green, Orange, Red and Silver
Available in a range of coloured anodised Aluminium options, RD Moto Oil Filler Cap directly replace the OE oil cap with a more colourful and stylish variant. Installation and tightening is a breeze thanks to the hex key/Allen key socket atop the cap and they include a replacement O ring seal to ensure a perfect seal.
This RD-Moto Oil Filler Cap (sized M27x3.0) is suitable for the Yamaha YZF-R1, YZF-R6, MT07 (FZ-07) and MT10 models (see application list above for more compatible bikes).
Filter Results