Shop By BikeSetting the standard in crash protection and bolt-on motorcycle accessories.

These crash protectors feature our stylish, aerodynamic Aero Bobbins and are available with Black and White bobbins. Suitable for the Yamaha YZF-R1/R1M '15- models.

Utilising specially designed spacers allowing for an easy, hassle-free installation, putting the protection exactly where it's needed for maximum effectiveness.

R&G Aero Bobbins from R&G - the market leaders in crash protection and the only insurance-approved crash protectors on the market. As used by some of the wo...

Our industry leading crash protectors are now available for the Yamaha YZF-R1 '13-'14 (2013-2014), they offer essential protection to the bike frame, engine and radiator keeping them raised up and away from the tarmac in the event of a crash or drop. Comprising specially machined and shaped spacers bridging the gap between the engine mounting point and spacing.

This kit requires modification to the fairing to install.

R&G Aero Bobbins from R&G - the market leaders in crash pro...

Our industry leading crash protectors are now available for the Yamaha YZF-R1 (2013-2014) in a non-drill option, utilising specially designed stainless steel blocks and brackets installing into existing engine mounts, they offer essential protection to the bike frame, engine and radiator keeping them raised up and away from the tarmac in the event of a crash or drop.

This kit is the non-drill option and as such requires NO modification to install.

These upper/front crash protectors feature our stylish, aerodynamic Aero Bobbin and are suitable for the Yamaha YZF-R1 '09-'12. Fairing modifications are required.R&G Aero Bobbins are a stylish, aerodynamic, teardrop shaped bobbin improving on the original good looks of our highly successful and popular standard round bobbins. Fitted with a removable end cap which hides the bobbins fittings, this sleek new design looks superb and is a winner on road and track!

These Front/Top crash protectors are suitable for the Yamaha YZFR1 produced between 1998 and 1999.
R&G Aero Bobbins from R&G - the market leaders in crash protection and the only insurance-approved crash protectors on the market. As used by some of the world's top race teams, what better endorsement do you need! R&G – innovation not imitation!

These Upper/Front crash protectors are suitable for the Yamaha YZFR1 produced between 2000 and 2001.
R&G Aero Bobbins from R&G - the market leaders in crash protection and the only insurance-approved crash protectors on the market. As used by some of the world's top race teams, what better endorsement do you need! R&G – innovation not imitation!

These Front/Top crash protectors are suitable for the Yamaha YZF-R1 produced between 2002 and 2003.
Classic Style Crash Protectors from R&G - the market leaders in crash protection and the only insurance-approved crash protectors on the market. As used by some of the world's top race teams, what better endorsement do you need! R&G – innovation not imitation!

These Front/Top crash crash protectors are suitable for the Yamaha YZFR1 produced between 2004 and 2006.

These Lower/Rear crash protectors are suitable for the Yamaha YZFR1 produced between 1998 and 2003.
R&G Aero Bobbins from R&G - the market leaders in crash protection and the only insurance-approved crash protectors on the market. As used by some of the world's top race teams, what better endorsement do you need! R&G – innovation not imitation!

These Lower/Rear crash protectors are suitable for the Yamaha YZFR1 produced from 2004 onwards.

These lower/rear crash protectors feature our stylish, aerodynamic Aero Bobbin and are suitable for the Yamaha YZF-R1 '07-'14.R&G Aero Bobbins are a stylish, aerodynamic, teardrop shaped bobbin improving on the original good looks of our highly successful and popular standard round bobbins. Fitted with a removable end cap which hides the bobbins fittings, this sleek new design looks superb and is a winner on road and track!

These upper/front crash protectors feature our stylish, aerodynamic Aero Bobbin and are suitable for the Yamaha YZF-R1 '07-'08. No fairing modifications are required.R&G Aero Bobbins are a stylish, aerodynamic, teardrop shaped bobbin improving on the original good looks of our highly successful and popular standard round bobbins. Fitted with a removable end cap which hides the bobbins fittings, this sleek new design looks superb and is a winner on road and track!

Radically tidy up the rear end of the Tail Tidy for Yamaha YZF-R1/ R1M '20- with this R&G Tail Tidy.

R&G tail tidy unit is easy to fit and will radically transform the rear end of the bike, removing the expansive (and often ugly!) OEM licence plate holders - replacing them with a much sleeker looking unit.

Tidy up the rear end of the Yamaha YZF-R1 / R1M '15-'19 with this powder coated stainless steel R&G Tail Tidy/Licence Plate Holder.

Made from stainless steel for superior strength, each piece is powder coated black for great looks and durability. Our tail tidy units are easy to fit and transform the rear of the bike, removing the expansive (and ugly!) OEM licence plate holders - replacing them with a much sleeker looking unit, tucking the number plate underneath the rear seat unit, for ...

Universal Licence plate adapters to suit different number plates hole widths, once installed enable a certain amount of flexibility when fitting the a number plate, replacing the need to redrill your number plate.

Available in a one size fits all.

Supplied in pairs.

NO TAIL TIDY BRACKET IS SUPPLIED WITH THIS KIT

This Tail Tidy is suitable for the Yamaha YZF-R6 (2003-2005) and the YZF-R1 (2002-2003). This product uses micro indicators which might require the fitting of RGR0001 resistors

Please note you will need to fit a smaller licence plate than one that meets UK legal requirements to be able to have the use of side indicators.

This Tail Tidy is suitable for the Yamaha YZFR1 (2004 - 2006).

Replacing the stock licence plate holder with a much smaller licence plate holder giving the bike back its sporty look!

This Tail Tidy is suitable for the Yamaha YZF-R1 '07-'14.

Available in Black, Titanium and Dark Blue powder coat finish, this Radiator guard fits the Yamaha YZF-R1/R1M '15- and and MT-10 '16- models.

Made from pressed aluminium and feature a neat, seamless frame (where applicable). They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris.

R&G Radiator Guards are made from aluminium, improve looks and protect your expensive and vulnerable radiator from flying debris.
This radiator guard is suitable for Yamaha YZF-R6 ('06-'16) / YZF-R1 ('07-'08).

R&G Radiator Guards are made from aluminium, improve looks and protect your expensive and vulnerable radiator from flying debris.This radiator guard is suitable for Yamaha YZF-R1 ('04-'06).

R&G Radiator Guards are made from aluminium, improve looks and protect your expensive and vulnerable radiator from flying debris.This radiator guard is suitable for the Yamaha R1 ('09-'14).

Available for the Yamaha YZF-R1/R1M '15-, this R&G Titanium oil cooler guard is both lightweight and super strong, thanks to its real Titanium (ASTM B265 Grade 1) mesh construction encased in a seamless aluminium frame.

This specific R&G radiator guard is made from an expanded ASTM B265 Grade 1 Titanium sheet and features a neat, seamless aluminium frame, securely holding the guard in place (utilising existing mounting or brackets).

Made in the UK

Please note: Only the...

R&G Oil Cooler Guards are available in a black, Titanium or Dark Blue finish. They are made from pressed aluminium and feature a neat, seamless frame. They improve the looks of your bike and help to protect your expensive and vulnerable oil cooler from flying debris.No permanent modifications need to be made to the bike.This oil cooler guard is suitable for the lower mounted oil cooler found on the Yamaha YZF-R1/R1M '15- models.

Please note this product is only the oil cooler, Radiator...

The R&G Stainless Steel Oil Cooler Guard series is a more rugged version of our existing aluminium guard.

Constructed from 1mm stainless steel sheet allows the guard to be incredibly strong and impervious to rust – perfect for bikes and riders who may tackle demanding terrains and conditions.

The laser-cut grills are designed for maximum airflow to the Oil Cooler so that cooling isn't compromised; the Oil Cooler Guard is as good looking as it is purposeful.

This oil c...

The R&G Stainless Steel Radiator Guard series is a more rugged version of our existing aluminium offering and are aimed particularly for Adventure and Touring bikes.

Constructed from 1mm stainless steel sheet allows the guard to be incredibly strong and impervious to rust – perfect for bikes and riders who may tackle demanding terrains and conditions.

The laser-cut grills are designed for maximum airflow to the radiator so that cooling isn't compromised; the Radiator Guard is...

Available for the Yamaha YZF-R1 '15- models, this R&G Titanium radiator guard is both lightweight and super strong, thanks to its real Titanium (ASTM B265 Grade 1) mesh construction, encased in a seamless aluminum frame.

This specific R&G radiator guard is made from an expanded ASTM B265 Grade 1 Titanium sheet and features a neat, seamless aluminium frame, securely holding the guard in place (utilising existing mounting or brackets).

Made in the UK

Picture is for illus...

Available in a 16"x 12" sheet, this R&G Titanium universal mesh is both lightweight and super strong, thanks to its real Titanium (ASTM B265 Grade 1) mesh construction.

Made from the same high quality mesh found on in our Titanium radiator and oil cooler guards, it improves the looks of your bike and help to protect your expensive and vulnerable radiator and other components from flying road debris.

No permanent modifications need to be made to the bike.

Supplied with...

This specific Race Series Engine Case Cover is compatible with the Yamaha YZF-R1/R1M '15- models protecting the Left Hand Side Engine Casing from damage in the event of a crash, drop or slide.

R&G Race Series Engine Case Covers have been specifically developed in collaboration with selected high level race teams and crash tested in BSB level racing events to ensure they meet and exceed all required standards for case protection.

In addition to the existing R&G Engine Case Cover...

This specific Race Series Engine Case Cover is compatible with the Yamaha YZF-R1/R1M '15- and MT-10 '16- models protecting the exposed Right Hand Side Oil Pump Casing from damage in the event of a crash, drop or slide.

R&G Race Series Engine Case Covers have been specifically developed in collaboration with selected high level race teams and crash tested in BSB level racing events to ensure they meet and exceed all required standards for case protection.

In addition to the exis...

This specific Race Series Engine Case Cover is compatible with the Yamaha YZF-R1/R1M '15 models protecting the exposed Right Hand Side Clutch Casing from damage in the event of a crash, drop or slide.

R&G Race Series Engine Case Covers have been specifically developed in collaboration with selected high level race teams and crash tested in BSB level racing events to ensure they meet and exceed all required standards for case protection.

In addition to the existing R&G Engine Ca...

Suitable for the Yamaha YZF-R1/R1M '15- Left Hand Engine Casing.

Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Series for use in any competition sanctioned by these Organisations. This approval means that race...

Suitable for the Yamaha YZF-R1M '15- and MT-10 '16- Right Hand Oil Pump Casing.

Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Series for use in any competition sanctioned by these Organisations. This approval ...

Suitable for the Yamaha YZF-R1/R1M Right Hand Clutch Cover Casing found on the 2015 onward models.

Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Series for use in any competition sanctioned by these Organisati...

Suitable for the Yamaha YZF-R1 04-08, FZ1-N, FZ1-S 06 onwards and FZ8 (2010 onwards) Left Hand Side Crank Case cover.

Made in the U.K.

Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Series for use in ...

Suitable for the Yamaha YZF-R1 04-05 Right Hand Side Crank Case Cover.

Made in the U.K.

Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Series for use in any competition sanctioned by these Organisation...

Suitable for the Yamaha YZF-R1 07-08 Right Hand Side Crank Case Cover.

Made in the U.K.

Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Series for use in any competition sanctioned by these Organisation...

Suitable for the Yamaha YZF-R1 04-08 Right Hand Side Oil Pump Cover.

Made in the U.K.

Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Series for use in any competition sanctioned by these Organisations....

Suitable for the Yamaha YZF-R1 '09-'14 Left Hand Side Crankcase Cover.

Made in the U.K.

Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Series for use in any competition sanctioned by these Organisation...

Suitable for the Yamaha YZF-R1 '09-'14 Right Hand Side Crank Case Cover.

Made in the U.K.

Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Series for use in any competition sanctioned by these Organisati...

Suitable for the Yamaha YZF-R1 '09-'14 Right Hand Side Oil Pump Cover.

Made in the U.K.

Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Series for use in any competition sanctioned by these Organisation...

Suitable for the Yamaha YZF-R1 2015-.Our industry leading race series engine case covers are now available in kit form containing all the engine case covers R&G offer for your bike in one go. Developed on track and brought to the road, R&G Engine Case Covers bring BSB and MotoAmerica Series approved levels of engine cover protection to your bike for complete peace of mind.

Made in the U.K.

Our industry leading engine case covers are now available in kit form containing all the engine case covers R&G offer for your bike in one go. Developed on track and brought to the road our engine case covers are made from 4mm polypropylene for strength, durability and good looks, they complement our other crash protection perfectly and come approved by the California Superbike School (www.superbikeschool.co.uk).

Suitable for the Yamaha YZF-R1 2015-.

This kit includes 3 ...

Suitable for the Yamaha YZF-R1 ('04-'05)Our industry-leading Engine Case Covers are now available in kit form containing all the covers R&G offer for your bike in one go. Developed on track and brought to the road, R&G Engine Case Covers bring BSB and Moto America race series-approved levels of engine protection to your bike for complete peace of mind.

Made in the U.K.

Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike...

Suitable for the Yamaha YZF-R1 ('07-'08)Our industry-leading Engine Case Covers are now available in kit form containing all the covers R&G offer for your bike in one go. Developed on track and brought to the road, R&G Engine Case Covers bring BSB and Moto America race series-approved levels of engine protection to your bike for complete peace of mind.

Made in the U.K.

Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike...

Suitable for the Yamaha YZF-R1 ('09-'14)Our industry-leading Engine Case Covers are now available in kit form containing all the covers R&G offer for your bike in one go. Developed on track and brought to the road, R&G Engine Case Covers bring BSB and Moto America race series-approved levels of engine protection to your bike for complete peace of mind.

Made in the U.K.

Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike...

This engine case slider for the left hand side of the Yamaha YZF-R1/R1M '15- models.

This product fits neatly and easily to the existing engine case and will provide additional protection in the event of a drop.

Fits the left hand side only (right hand side available separately - ECS0095BK).

Designed using the very latest in 3D scanning and printing technology to ensure an exact fit, the product is made from HDPE (Black), the same material as used in our industry lead...

This engine case slider, specially designed to protect for the right hand side engine casings of the Yamaha YZF-R1/R1M '15- and Yamaha MT-10 (FZ-10) '16- models in the event of a crash or slide.

This product fits neatly and easily to the existing engine case and will provide additional protection in the event of a drop.

Fits the right hand side only (left hand side available separately - ECS0094BK (for YZF-R1) or ECS0111BK (for MT-10)).

Designed using the very latest ...

This engine case slider fits the right hand side only and is suitable for the Yamaha R1 '07-'14 models.

This engine case slider fits the left hand side only and is ONLY suitable for the Yamaha R1 '07 &'08 models.

This engine case slider for the right hand side of the Yamaha YZF-R1 ('09-'14). This product fits neatly and easily to the existing engine case and will provide additional protection in the event of a drop.

Fits right hand side only.

R&G Racing engine case sliders compliment the R&G Racing crash protectors and the additional range of products that we offer for these bikes.

These engine case sliders for the Yamaha YZF-R6 ('06-'12) and Yamaha YZF-R1 ('09-'14) models fit neatly and easily to the existing engine case on the left-hand side and will provide additional protection in the event of a drop.

R&G engine case sliders complement the R&G crash protectors and the additional range of products that we offer for this bike.

Suitable for the YZF-R6 '06-'17 and YZF-R1 '09-'14 models.

These bar end protectors have been specially designed and developed for the Yamaha YZF-R1/R1M 2015 onwards models.

Helping to protect expensive levers and clipons from damage in the event of a drop or crash or slide.

Easy to install they simply screw into place taking only seconds.

Protect your bars with our great little bar end sliders/protectors. Suitable for Renthal bars, LSL bars, Ducati 848 '08- / Ducati Diavel (2011-), Monster 1200 & S '14-, KTM RC125/200 '14-

Please Note, if fitting to a bike with closed ended grips, Modification will be required to install these bar ends.

Helping to protect those expensive levers and clipons from damage in the event of a drop or crash.

Easy to install they simply screw into the end of the bars.

These bar end protectors are suitable for the Yamaha Fazer 600 (produced up to 2003), FZ-1 ('06 - '11), FZ8 (2010 onwards), (YZF-R1 ('99 - '14, YZF-R6 ('06 - '14), FJR1300 ('01 - '14).

These Bar End Sliders are suitable for Gilles and Driven, clip ons (Plain) Bars.

These Bar End Sliders are suitable for Gilles (Threaded) Vario and GP Light Bars.

This Kaoko Throttle Stabilizer kit is designed to fit the Yamaha FJR1300(all year models), YZFR1 (2004-2015), YZFR6 (all year models).

Awarded RiDE magazine Best buy award status.

R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.

Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and scooters). In only 2 minutes the grips heat up to 35°C (95°F) and on those r...

R&G Premium Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.

All new Premium Features:
-Heat Setting Memory
-Auto Cut-Out
-Fully Waterproof
-New Grip Design

Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and...

Eliminate that annoying spinning grip by getting a tube of grip glue. Holds grips firmly in place. Helps to reduce arm pump caused by trying to hold spinning grips in place.


Ideally suited to be used when installed R&G Heated Grips.

Improve your vision, confidence and safety all year round while you ride!

This ground-breaking product enables you to WASH your visor while on the bike.

Unique wash/wipe action that’s incredibly easy to use: 1. Fill the tank with Visorcat wash (supplied). 2. Wash by moving Visorcat across your visor one way. 3. Wipe the residue away by moving Visorcat across your visor in the other direction. The result is 100% clear vision in all conditions. Keep the sponge clean by rinsing i...

The all-new R&G Second Skin Dashboard Protection kit is made from high quality, anti-scratch material. This bespoke screen protector kit has been designed to protect the delicate dashboard screen on your bike from unwanted scratches and marks.

Kit includes detailed instructions to aid in the dashboard protector placement, 2x dashboard protectors (1x spare), mini spray bottle, suede polishing cloth, wet & dry wipe, squeegee and dust removal strip.

R&G Second Skin stone chip protection film is a non-yellowing (UV Stable), ultra-tough, easy-to-apply, polyurethane protective film. Designed to protect your road or track motorcycle from stone chips, road salt, tar, abrasions, fairing stress fractures and bodywork/fuel tank scratches from general use. The unique properties of our protection film enable it to disperse the impact energy of gravel and small stones, bouncing them off and leaving your bodywork untouched beneath.

This R&G Moulded Lever Guard kit can be fitted to either the brake or clutch sides and comes with our universal fitting kit, its expanding design clamps to the inside of the clipon/handlebar (13-21mm diameter) and is available in a range of colour options.

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch l...

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filters; again potentially causing front brake engagement.

R&G Offset Cotton Reels directly replace the OE chain adjusters on the rear swingarm, off-setting the cotton reel mounting point from installed directly into the swingarm, instead into a specially machined metal bracket. Offering the best of both worlds in terms of crash protection and functionality with the ability to use the R&G Offset Cotton Reels bobbins as paddock stand bobbins for tyre/chain maintenance as well as offering crash protection to the rear wheel components.

Specially d...

These cotton reels mount directly into the mounting points on the rear swingarm offering the best of both worlds in terms of crash protection and functionality with the ability to use R&G cotton reels, which offer excellent crash protection to those components located towards the rear as well as the ability to lift up the rear of the bike with a paddock stand for maintenance and tyre changes.

Available in Black or White.

Sold in Pairs.

These fork protectors are suitable for the Yamaha YZF-R1/R1M '15-, YZF-R6 '17- and Yamaha MT-10 '16- models.

Easy to install, they help to eliminate damage to the front forks, fork bottoms and brake callipers during a crash or drop.

These fork protectors are suitable for the Yamaha YZF-R6 '05-'16 & YZF-R1 '02-'14 *(not compatible with the YZF-R1 SP models)* and T-MAX 530 '15-.

These fork protectors are suitable for the Yamaha YZFR1 (models produced between 1998 and 2001).

These Swingarm Protectors, for Yamaha YZF-R1 '09- / YZF-R1M ’15- / YZF-R6 '06-'17- models, fit into the rear spindle and expand to a snug fit, looking great and protecting the swingarm. They are held in place by means of their expanding design, meaning installation is very simple. They help protect the core, expensive components found around the swingarm area, such as the brake calliper, disc, sprocket and the swingarm itself!

This 4 piece R&G Tank Traction Grips have been specially designed for the Yamaha YZF-R1/ R1M '20- model.

R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking.

This Tank Traction Grip kit has been specially designed for the Yamaha YZF-R1/R1M '15-'19.

R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking.

R&G Tank Traction Grips have been specially designed for the Yamaha YZF-R1 '07-'08.

R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking.

Please...

R&G Tank Traction Grips have been specially designed for the Yamaha YZF-R1 '09-'14.

R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking.

Please...

R&G Tank Traction Pads have been specially designed for the Yamaha YZF-R1 '04-'06.

R&G Tank Traction Pad kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking.

Please n...

R&G Tank Traction Grips have been specially designed for the Yamaha YZF-R1 '02-'03.

R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking.

Please...

This Boot Guard kit has been specially designed for the Yamaha YZF-R1 '13-'14.

R&G Boot Guard kits are available for a large range of bike styles and brands, with new applications released regularly. The unique R&G texture was specifically designed to be durable, providing the rider with a buffer between his boot on the exposed areas of the swingarm which can (on occasion) come into contact with each other during cornering causing wear and unwanted damage to the swingarm or boots (both ...

This Boot Guard kit has been specially designed for the Yamaha YZF-R1/R1M '15- models.

R&G Boot Guard kits are available for a large range of bike styles and brands, with new applications released regularly. The unique R&G texture was specifically designed to be durable, providing the rider with a buffer between his boot on the exposed areas of the swingarm which can (on occasion) come into contact with each other during cornering causing wear and unwanted damage to the swingarm or boot...

Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.

Patent No: GB2459728

Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.

Patent No: GB2459728

The Shocktube® is a high-impact, waterproof, vented tube, made from top quality, bonded 100% CR Neoprene™ which is double lined with stretch nylon on both sides.
Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.
The Shocktube® can be fitted to most motorcycles with either monoshock or twin shock systems quickly, without the need to remove the shock absorber!
It continually prote...

Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.

Patent No: GB2459728

This Tank Slider (pair) kit is compatible with the Yamaha YZF-R1/R1M '15-.

As used by the California Superbike School. (http://www.superbikeschool.com/)

Our Tank Sliders are made from Carbon fibre reinforced with DuPont™ Kevlar®, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tank, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.

Made in the U.K. ...

This Tank Slider kit is compatible with the Yamaha YZF-R1 ('09-'14).

As used by the California Superbike School. (http://www.superbikeschool.com/)

Our Tank Sliders are made from Carbon fibre reinforced with DuPont™ Kevlar®, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tank, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.

Made in the U.K.
<...

This Tail Slider kit is compatible with the Yamaha YZF-R1 '15-/R1M '15-'19.

As used by the California Superbike School. (http://www.superbikeschool.com/)

Our Tail Sliders are made from Carbon fibre reinforced with DuPont™ Kevlar®, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tail, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.

Made in the U.K ...

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Suitable for the Yamaha YZF-R1/R1M '15-, Yamah...

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Suitable for the Yoshimura R-77 exhaust.
...

This Hexagonal Exhaust Protector is suitable for hexagonal cans such as the Akrapovic Hex and the standard Yamaha R6 '06-'11 can. It fits both left and right cans/exhausts. Images 4, 5 & 6 show the product fitted to a BMW S1000RR. Made in the U.K.

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Made in the U.K.

This Exhaust Hanger is suitable for Yamaha YZF-R1 '98-'01 models with a single exhaust system.

This Exhaust Hanger is suitable for Yamaha YZF-R1 '02-'03 models with a single exhaust system.

Once you have removed the pillion footrests, fill the void left behind and cover those otherwise exposed holes in the sub-frame with the R&G blanking plates.

This pair of Footrest Blanking Plates have been specially designed to cover/protect both side of the Yamaha R1/ R1M '20-.

R&G Footrest Blanking Plates are easy to install, simply screwing into place in-place of the rear pillion pegs, covering those otherwise exposed sub-frame holes, that if left uncovered could result in ...

This particular model fits the Yamaha YZF-R1/R1M '15- and MT-10 '16- models.

Never forget your sidestand puck again!

Kickstand Shoes bolt onto the bottom of the sidestand, to enlarge the original’s footprint by up to 100%, significantly spreading the load placed upon it, to help prevent the stand ‘piercing’ the ground. Despite this enlargement, the Shoe does not affect ground clearance or interfere with the chain run during normal riding.

Never forget your sidestand puck again!

Kickstand Shoes bolt onto the bottom of the sidestand, to enlarge the original’s footprint by up to 100%, significantly spreading the load placed upon it, to help prevent the stand ‘piercing’ the ground. Despite this enlargement, the Shoe does not affect ground clearance or interfere with the chain run during normal riding.

This particular model fits the Yamaha YZF-R1 '13-'14.

The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators for the following manufacturers: Honda, Kawasaki & Yamaha.

Please check the existing Indicator Relay where possible before ordering - if you are still unsure please ask your local dealer.

When using micro indicators, we recommend installing a set of R&G Indicator Adapters, which fill in gaps left by the removal of the original indicators.

These Indicator Adapters (IAS0008BK) come as a set of 4 pieces to suit Yamaha R6 '99-'02, R1 '98-'01, Fazer 600/1000 and can be used on both front and rear indicator mounting points.

All our indicators adapters are designed to be used in conjunction with R&G Micro Indicators with 8mm threads (code RG370: bulb type, code RG371...

When using micro indicators, we recommend installing a set of R&G Indicator Adapters, which fill in gaps left by the removal of the original indicators.

These Indicator Adapters (IAS0009BK) come as a set of 4 pieces to suit Yamaha YZF-R6 '03-'16, YZF-R1 '02-'14 and can be used on both front and rear indicator mounting points.

All our indicators adapters are designed to be used in conjunction with R&G Micro Indicators with 8mm threads (code RG370: bulb type, code RG371: LED ty...

R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of our iconic Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs, they come with clear lenses and illuminate on the side for additional visibility.

Available in two colour options: Black or Silver.

Can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors. ...

Are your micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you will find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.

** Supplied as a pair **


These resistors are for the R&G Bulb Indicators. If you have R&G LED indicators, please use RGR0002

Are your led micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you may find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.Note: We highly recommend buying this product when purchasing LED micro / mini indicators in order to save any disappointment when fitting.

NO wire cutting or soldering is required, these resistors fit inline.

** Supplied as a pair ** <...

R&G Micro Indicators (turn signals) designed to be fitted to the rear of your motorbike.

Can be used on the front or rear of the bike.

Supplied as a pair

R&G LED Micro Indicators (turn signals) are designed to be fitted to the rear of your motorbike. Sold in pairs, they come as standard with both amber and clear lenses.

Can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors. Please see the relevant tail tidy section of our website to find out more.

Note: In some cases, after fitting these indicators, you may find that they flash too ...

These indicator adapters are made to suit the Yamaha YZF-R1, Yamaha MT-07 , Yamaha MT-09 & SP model, Yamaha YZF-R25, Yamaha XSR700, Yamaha R3 and Yamaha Tracer 700 models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.

Micro Indicators not included.

R&G Racing's road-racing inspired toe guard has been developed and designed to give maximum protection combined with great looks. Made from aluminium for a lightweight and strong product it features pre-drilled holes attaching to the existing mounts on the swingarm, ensuring effective coverage of the sprocket.

This racing Toe Guard is compatible with the Yamaha YZF-R1/R1M '15-, R25 '14-, MT-25 '15-, MT-10 '16-, MT-03 '15- and the R3 '15- models.

No modifications to the bike a...

R&G Racing's new, road-racing inspired toe guard has been developed for maximum coverage and great looks. Made from aluminium for a lightweight and strong product it features pre-drilled holes attaching to the existing mounts on the swingarm, ensuring effective coverage of the sprocket.

This Racing Toe Guard is compatible with the Yamaha YZF-R6 '17- and YZF-R1 (including YZF-R1M) '15- models.

No modifications to the bike are required to fit this toe guard.

R&G Racing's new, road-racing inspired toe guard has been developed in conjunction with roads hero Ryan Farquhar. Made from lightweight, high-density polyethylene, it features slots for improved positioning and a longer-than-usual kickback, in order to ensure adequate coverage of the sprocket in cases of running a long wheelbase - a typical feature of road racing.

These toe/chain guards are made from ABS Plastic. They look good, can be fitted in less than five minutes and are available in black or carbon look.

These toe/chain guards are made from Aluminium and have a Silver Finish. They are suitable for bikes with Dual Swingarms.

These toe/chain guards are made from Aluminium and have a Black Finish. They are suitable for bikes with Dual Swingarms.

This frame plug kit fits neatly into the lower frame hole found on the right hand side of the Yamaha YZF-R1/R1M '15- and Yamaha MT-10 '16-.
.

Protecting it from road grime, mud and debris build up, these neat inserts really clean up the look of the stock bike.

This frame plug fits neatly into the upper frame holes found on either the left or right hand sides of the Yamaha YZF-R1/R1M '15- and MT-10 '16- models.

Sold Singularly - Please order two if you want to cover both frame holes.

This frame plug kit fits neatly into the lower frame hole found on the left hand side of the Yamaha YZF-R1/R1M '15- and MT-10 '16- models.

Protecting it from road grime, mud and debris build up, these neat inserts really clean up the look of the stock bike.

This Top Yoke Cap is suitable for the Suzuki DL1000 V-Strom '14-, Suzuki GSX-S 1000 '15-, Suzuki GSX-S 1000FA '15-, Yamaha YZF-R1 '15-, Honda Africa Twin '16- and Africa Twin Adventure Sports '18-.

A "must have" to give that Stem Nut of yours a finished look. Covering the stock Yoke Stem Nut and securing in place thanks to its ribbed design ensures a tight fit that won't fall out or move.

Finished in Black.

Sold as a single.

This upper frame plug is suitable for the following bikes:Yamaha YZF-R1 '07-'14 (fits both sides).Please note that this product is sold as singles so you will need to buy 2 if you wish to fit them to both sides of the bike.

Lose your mirrors for that rebellious look or simply to stop your fairings flapping whilst on track days or racing!

These stylish R&G Mirror Blanking Plates improve the looks of your bike by covering up the otherwise exposed mounting points from the mirrors.

This product is suitable for the Yamaha YZF- R1/ R1M '20- models.

Lose your mirrors for that rebellious look or simply to stop your fairings flapping whilst on track days or racing!

Made from HDPE for a fantastic finish, these neat little blanking plates fit over the mounting point for the mirrors and can be fitted in seconds - (comes supplied with bolts for installation).

This product is suitable for the Yamaha YZF-R1/ R1M '15- models.

This R&G Fender Extender is compatible with the Yamaha YZF-R1 '15-/R1M '15-'19, YZF-R6 '17- and MT10 '16-models.

R&G Fender Extenders offer additional protection to front-mounted coolers, downpipes and fairing panels from debris, road grit, mud and water kicked up by the front wheel. Attaching to the motorcycle's front mudguard/fender via included adhesive strips and push rivets, installation takes only minutes.

These anodised aluminium paddock stand bobbins are suitable for most Yamahas EXCEPT: Thunderace, TRX, YZF750 (use M10 for these Yamahas).

Supplied in Pairs

These anodised aluminium paddock stand bobbins are suitable for most Aprilia, Triumph and Yamaha models.

Supplied in pairs and available in 3 colour options.

Ideally suited to work with our Elevation series paddock stands.

Please carefully check your bike to ensure the Paddock Stand/Cotton Reel mounts are the correct size before purchasing.

These covers are breathable, soft and elasticated. They can also be spun dry.

Ideal for keeping your pride and joy spotlessly clean over the winter or when put back into indoor after cleaning!

Made from a high quality breathable material that allows the air to constantly travel through.

Available in Black with Silver logo and piping or Red with White logo/piping.

The R&G Superbike Outdoor Cover has been redesigned for 2017 to include many new features. Based off our original award winning design and made of quality waterproof material, the cover also features elasticated rim and Belly straps as standard ensure the cover stays fixed in place and stops wind, mud or water getting up inside the cover and ensure a tight fit around the base. Front and rear chain loops for security devices covered by a velcro® closing flap to ensure the cover is fully waterproo...

The wireless system does not need any programming and features a compact LCD screen which fits into a magnetic mount placed on a prominent part of the bike. The fully sealed and buttonless device can be easily removed for security when parking unattended and is small enough to fit in a pocket.

R&G Rim Tape is designed specifically for 17" motorcycle wheels. Using only the highest-quality material available R&G's Rim Tape is designed to give years of service!

Available, in a large range of colours and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel w...

At home on any motorcycle from sportsbikes to cruisers, the R&G Modular Centre Tank Pad helps protect the fuel tank on your motorcycle from scratches and unwanted marks from zippers/buckles and general wear and tear with our newly developed 3 piece modular tank pad.

Please note: R&G Tank Traction Grips grips shown on the sides of the tank ARE NOT included but are available separately.

Keep your clutch reservoir protected with our handy Clutch Reservoir Protector (Booty)!

Now available in Black with White logo or Orange with Black logo!

Take care of your helmet with our R&G Racing Deluxe Helmet Bag!Made from a tough, hard-wearing outer and fleece lining, this universal helmet bag protects against dust and light knocks.

Our revolutionary tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike. ** Part does not include Ratchet Straps ** R&G Racing Handlebar Top Straps ST0001BL R&G Racing Handlebar Top Straps, 25mm Ratchet Straps, RG, R&G Racing, bike parts, motorbike supplies

Our revolutionary 25mm tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike. Individual ratchet strap length: 72" (180cm) ** Part does not include top-strap ** 25mm Ratchet Straps ST0699 25mm Ratchet Straps ST0699

R&G Racing Umbrella in silver and black with R&G Logo.

High quality holesaw, suitable for modifying your fairing to take the R&G Crash protector kits that require 28mm holes drilled.

Protect your fuel tank from scratches and unwanted marks from zippers/buckles and general wear and tear with our traditional style tank pad.

Available in Black.

Our Visor Pouch/Protector is compatible with all major brand visors. Ideal for carrying a spare clear visor for when it gets dark or vice versa. Equipped with a high-quality fastex buckle and belt (expandable up to 48 inches) and features a fleece-lined interior to keep your visor in best condition - coupled with a large Velcro closing tab, making the visor easy to get out when needed and ensuring it stays safe and secure when not.


Comes with reflective "R&G" logo and text to help ...

New for 2013 comes our universal mesh flat sheets (sized 16" x 12") available in black, titanium or green finishes to fit almost any radiator size or fill any fairing opening on your bike.

Made from the same high quality mesh found on in our Radiator Guard range, it improves the looks of your bike and help to protect your expensive and vulnerable radiator and other components from flying road debris.

No permanent modifications need to be made to the bike.

Supplied w...

Give your visor that racing look as used by many R&G supported riders in BSB and around the world.

Supplied as a pair.

The R&G “BSB Series” Tank Pad has a unique design and multi-part composition, to help protect fuel tanks from scratches and unwanted marks from zippers/buckles and general wear and tear. Its slimline, modular structure affords comfort and style to any bike, thanks to its flexible 3-piece layout.

Our “BSB Series” Tank Pad is made from the highest quality materials, includes an alcohol wipe and uses Orafol™ adhesive - ensuring that it stays perfectly in place and lasts for years.
<...

Our stylish Roll-Top Rucksack is fully waterproof, extremely durable and very comfortable.

Features of the Rucksack:

Waterproof
Padded shoulder straps and back
Roll-down-top design
Stylish look
Reflective strip across the front
2 external pockets
Secure quick release buckles
High-quality material.

Stick them on your bike, your car, your garage door, your bedroom wall, your tool box....... Stick them anywhere you like!

This R&G Sticker Sheet consists of 15 individual stickers - 11 black and 4 silver.

Similar in design to our industry-leading 'dry' session Aero Knee Sliders which are used all over the world and adorn the best racers’/riders’ leathers! They are extensively used by many riders in the British Superbike Championship (amongst others) and race schools worldwide.

This R&G 'wet' Aero Knee Slider is a much taller version compared to the 'dry' session Aero Knee Slider, offering improved feel and confidence when leant over, especially in wet/damp conditions. They are made from...

Double Sided Velcro Patch Adapter for R&G Kneesliders (Kneesliders sold separately)

Our Aero Knee Sliders are extensively used all over the world, seen on the best riders, best roads and best tracks. They are used by many riders in the British Superbike Championship (amongst others) and race schools worldwide.

Developed with the feedback of racers and road riders alike. we made our latest generation Aero Knee Sliders, from a special blend of composite materials to ensure the r...

Our Wider Profile Aero Knee Sliders are extensively used all over the world, seen on the best riders, best roads and best tracks. They are used by many riders in the British Superbike Championship (amongst others) and race schools worldwide.

Developed with the feedback of racers and road riders alike. we made our latest generation Aero Knee Sliders, from a special blend of composite materials to ensure the riders gets the best overall performance available.

Attaching to your su...

These R&G Deluxe leather gloves are reinforced with two layers of leather and two protectors on the palm to prevent damage to your scaphoid bone in the wrist. The thumb and index finger are fitted with a non-slip material, the knuckles are Carbon Fibre reinforced with DuPont™ Kevlar® with padding and are articulated to improve comfort. The long cuff has a padded bottom and a carbon shield on top to protect the ulna (small raised bone at the top of the wrist). The gloves are secured with a single...

You've got your bike protected, now what about your ears!

These DIY moulded ear plugs offer a low cost, re-usable custom moulded earplug in a do it yourself kit.

Made by HEL - Brought to you by R&G.

The HEL Performance brake line fittings offer safety, security and a slimline attractive finish. All hoses are supplied to the FMVSS-106 standard and the kits contain all items required for a complete installation including stainless steel banjo bolts and copper washers.

Spare / replacement amber light bulb for R&G Micro Indicators (turnsignals).

Replacement tail tidy light for tail tidies supplied with the new style R&G light.
PLEASE NOTE THIS IS THE LIGHT UNIT ONLY AND DOES NOT INCLUDE ANY BRACKETS.

Bolt on rectangular red reflector; ideal for numberplates

Supplied in singles only

New to R&G Racing developed specifically to suit our tail tidy range comes our "Reflector Extender" kits. With a large (30mm x 85mm) (E) Marked reflector this kit allows the easy installation of a reflector onto our tail tidies simply screwing into tail

R&G Racing developed its range of Reflector Kits specifically to suit our tail tidy range. With a large (30mm x 85mm) '(E)' Marked reflector this kit allows the easy installation of a reflector onto our tail tidies simply either adhering the plate onto the back of the number plate or using a number plate screw (not included).

Self adhesive Red Reflector; ideal for numberplates.

4cm diameter and is e-marked to be fully legal in UK and Europe.

Supplied in singles only.

Maximise your potential and fine tune your machine to your exact requirements, whether it is a lower more comfortable position, or a higher position giving more ground clearance for track, get the bike set up for you.

Suitable for the Yamaha YZF-R1/R1M '15-. Compatible in 'Road' shift only.

Milled out of lightweight aluminium for high strength and durability. R&G Rearsets provide a large range of adjustment to exactly position and tailor to suit every rider (11 positions).

Maximise your potential, tune your machine to your exact requirements. R&G Racing Yamaha YZF-R1 ('09 - '14) Adjustable Rearsets are milled out of lightweight aluminium for high strength and durability. R&G adjustable rearsets provide the option to assemble with racing shift-pattern(1 up - 5 down) or road setup as standard (1 down - 5 up). Our rearsets provide large adjustments and exact positioning to suit every rider (11 positions). Designed to be easily installed. Powdercoated in black with ...

Maximise your potential, tune your machine to your exact requirements. R&G Racing Yamaha YZF-R1 ('07 - '08) Adjustable Rearsets are milled out of lightweight aluminium for high strength and durability. R&G adjustable rearsets provide the option to assemble with racing shift-pattern(1 up - 5 down) or road setup as standard (1 down - 5 up). Our rearsets provide large adjustments and exact positioning to suit every rider (11 positions). Designed to be easily installed. Powdercoated in black with ...

Our Elevation series Paddock Stands are modular for easy disassembly and transportation yet strong and sturdy when assembled.

This model is a Front Paddock Stand and has specially designed adapters on the arms which hook and slot into the underside of the forks legs.

Made from high quality FE360 tubular steel and powder coated black for a superb crisp finish. Coming supplied with 4 high quality red castors wheels for smooth rolling action and extra stability.

Our Elevation series Paddock Stands are modular for easy take down and transportation yet strong and sturdy when assembled.

This model is a Rear Paddock Stand and has specially designed hooks and adjustable arms fully compatible with our cotton reels and spindle sliders.

Made from high quality FE360 tubular steel and powder coated black for a superb crisp finish. Coming supplied with 4 high quality red castors wheels for smooth rolling action and extra stability.

R&G Paddock Stand Hooks allow you to mount your bike onto a Paddock stand with ease. They are designed for use in conjunction with an R&G Paddock Stand. These Hooks are sold in pairs, they're simple to use and, simple to fit. Our Paddock Stand Hooks are easy to locate onto the stand thanks to their enlarged collar design.

These hooks fit the Micron, Champion and Scorpion stands. The diameter of the bar is 12mm.

These paddock stand hooks fit rear stands made by Harris and are designed to be used in conjuntion with our R&G paddock stand bobbins and cotton reels.

These paddock stand pads fit the R&G rear or front paddock stand and are for those bikes where cotton reels or paddock stand bobbins mounts aren't available on the swingarm or Forks without front paddock stand mounts and cant be installed allowing you still to still raise the gear of your bike for essential bike servicing and cleaning.

Sold per pair.

These paddock stand hooks install into the R&G Elevation series FRONT paddock stands, keying into the hole in the bottom of the fork legs to offer a secure, stable and easy to locate lifting point.

Sold in Pairs.

These paddock stand adapters are designed to be used in conjunction with our R&G paddock stand Hooks.

This specific Scorpion Slip on exhaust is finished in Titanium and fits the Yamaha YZF-R1 '15- and YZF-R1M '15- onward models in the "BSB Superstock" styles and comes with an R&G Exhaust Hanger.

Scorpion utilises the latest technologies and extensive R&D in the development and manufacture of its exhausts. Its experience in high-level motorsport, BSB (British SuperBikes), amongst many others allows it to develop high-quality, durable and performance-enhancing products. Utilising aerospa...

This specific exhaust fits the Yamaha YZF-R1 '15 models in the "Serket Taper" style.

Scorpion utilises the latest technologies and extensive R&D in the development and manufacture of its exhausts. Its experience in high-level motorsport, BSB (British SuperBikes), amongst many others allows it to develop high-quality, durable and performance-enhancing products. Utilising aerospace-grade materials such as stainless steel, carbon fibre and titanium in their construction, Scorpion exhausts ...

This specific Scorpion Slip on exhaust fits the Yamaha YZF-R1 '15- models onward in the "RP-1 GP" styles.

Scorpion utilises the latest technologies and extensive R&D in the development and manufacture of its exhausts. Its experience in high-level motorsport, BSB (British SuperBikes), amongst many others allows it to develop high-quality, durable and performance-enhancing products. Utilising aerospace-grade materials such as stainless steel, carbon fibre and titanium in their constructio...

This specific exhaust fits the Yamaha YZF-R1 '09-'14 models in the "Factory" styles.

Scorpion utilises the latest technologies and extensive R&D in the development and manufacture of its exhausts. Its experience in high-level motorsport, BSB (British SuperBikes), amongst many others allows it to develop high-quality, durable and performance-enhancing products. Utilising aerospace-grade materials such as stainless steel, carbon fibre and titanium in their construction, Scorpion exhausts ...

This specific exhaust fits the Yamaha YZF-R1 '09-'14 models in the "Serket" styles.

Scorpion utilises the latest technologies and extensive R&D in the development and manufacture of its exhausts. Its experience in high-level motorsport, BSB (British SuperBikes), amongst many others allows it to develop high-quality, durable and performance-enhancing products. Utilising aerospace-grade materials such as stainless steel, carbon fibre and titanium in their construction, Scorpion exhausts e...

This De-Cat exhaust has been specifically designed to fit the Yamaha YZF-R1 '09-'14 models, fitting either the Factory or Serket Slip on styles.

Scorpion utilises the latest technologies and extensive R&D in the development and manufacture of its exhausts. Its experience in high-level motorsport, BSB (British SuperBikes), amongst many others allows it to develop high-quality, durable and performance-enhancing products. Utilising aerospace-grade materials such as stainless steel, carbon ...

This De-Cat exhaust has been specifically designed to fit the Yamaha YZF-R1 '07-'08 models, fitting either the Scorpion Factory or Serket Slip on exhaust styles.

Scorpion utilises the latest technologies and extensive R&D in the development and manufacture of its exhausts. Its experience in high-level motorsport, BSB (British SuperBikes), amongst many others allows it to develop high-quality, durable and performance-enhancing products. Utilising aerospace-grade materials such as stainle...

These specific dual Scorpion Slip On exhausts fit the Yamaha YZF-R1 '07-'08 models in the "Serket" styles.

Scorpion utilises the latest technologies and extensive R&D in the development and manufacture of its exhausts. Its experience in high-level motorsport, BSB (British SuperBikes), amongst many others allows it to develop high-quality, durable and performance-enhancing products. Utilising aerospace-grade materials such as stainless steel, carbon fibre and titanium in their constructi...

This De-Cat exhaust has been specifically designed to fit the Yamaha YZF-R1 '04-'06 models, fitting either the Scorpion Factory or Serket Slip On styles.

Scorpion utilises the latest technologies and extensive R&D in the development and manufacture of its exhausts. Its experience in high-level motorsport, BSB (British SuperBikes), amongst many others allows it to develop high-quality, durable and performance-enhancing products. Utilising aerospace-grade materials such as stainless steel...

These specific dual Scorpion Slip On exhausts fit the Yamaha YZF-R1 '04-'06 models in the "Factory" styles.

Scorpion utilises the latest technologies and extensive R&D in the development and manufacture of its exhausts. Its experience in high-level motorsport, BSB (British SuperBikes), amongst many others allows it to develop high-quality, durable and performance-enhancing products. Utilising aerospace-grade materials such as stainless steel, carbon fibre and titanium in their construct...

These specific dual Scorpion Slip On exhausts fit the Yamaha YZF-R1 '02-'03 models in the "Carbine" styles.

Scorpion utilises the latest technologies and extensive R&D in the development and manufacture of its exhausts. Its experience in high-level motorsport, BSB (British SuperBikes), amongst many others allows it to develop high-quality, durable and performance-enhancing products. Utilising aerospace-grade materials such as stainless steel, carbon fibre and titanium in their construct...

These specific dual Scorpion Slip On exhausts fit the Yamaha YZF-R1 '02-'03 models in the "Factory" styles.

Scorpion utilises the latest technologies and extensive R&D in the development and manufacture of its exhausts. Its experience in high-level motorsport, BSB (British SuperBikes), amongst many others allows it to develop high-quality, durable and performance-enhancing products. Utilising aerospace-grade materials such as stainless steel, carbon fibre and titanium in their construct...

This De-Cat exhaust pipe has been specifically designed to fit the Yamaha YZF-R1/R1M '15- models, fitting either the Scorpion RP-1GP (YA1002), Serket Taper (RYA99) or OEM exhaust.

Scorpion utilises the latest technologies and extensive R&D in the development and manufacture of its exhausts. Its experience in high-level motorsport, BSB (British SuperBikes), amongst many others allows it to develop high-quality, durable and performance-enhancing products. Utilising aerospace-grade materia...

This Titanium De-Cat exhaust pipe has been specifically designed to fit the Yamaha YZF-R1/R1M '15- models, fitting either the Scorpion RP-1GP (YA1002), Serket Taper (RYA99) or OEM exhaust.

Scorpion utilises the latest technologies and extensive R&D in the development and manufacture of its exhausts. Its experience in high-level motorsport, BSB (British SuperBikes), amongst many others allows it to develop high-quality, durable and performance-enhancing products. Utilising aerospace-grad...

This specific Scorpion slip on exhaust fits the Yamaha YZF-R1 '98-'01 (Factory Style) models in the "Factory" styles.

Scorpion utilises the latest technologies and extensive R&D in the development and manufacture of its exhausts. Its experience in high-level motorsport, BSB (British SuperBikes), amongst many others allows it to develop high-quality, durable and performance-enhancing products. Utilising aerospace-grade materials such as stainless steel, carbon fibre and titanium in their...

Red Dynamic offer an expanding range of stylish Carbon Fibre effect motorcycle fuel cap and yoke protectors. The resin topped carbon fibre effect protectors offer a rich luxury finish whilst adding both style and providing protection from key and keyring damage to those otherwise exposed metal components.

Red Dynamic offer an expanding range of stylish Carbon Fibre effect motorcycle fuel cap and yoke protectors. The resin topped carbon fibre effect protectors offer a rich luxury finish whilst adding both style and providing protection from key and keyring damage to those otherwise exposed metal components.

This particular Red Dynamic Carbon Fibre Yoke Pad is suitable for the Yamaha YZF-R1 '09-'11 models.

Red Dynamic offer an expanding range of stylish Carbon Fibre effect motorcycle fuel cap and yoke protectors. The resin topped carbon fibre effect protectors offer a rich luxury finish whilst adding both style and providing protection from key and keyring damage to those otherwise exposed metal components.

This particular Red Dynamic Carbon Fibre Yoke Pad is suitable for the Yamaha YZF-R1 '12-'14 models.

Red Dynamic offer an expanding range of stylish Carbon Fibre effect motorcycle fuel cap and yoke protectors. The resin topped carbon fibre effect protectors offer a rich luxury finish whilst adding both style and providing protection from key and keyring damage to those otherwise exposed metal components.

This particular Red Dynamic Carbon Fibre Yoke Pad is suitable for the Yamaha XJ6/XJ6F/Diversion models.

Red Dynamic offer an expanding range of stylish Carbon Fibre effect motorcycle fuel cap and yoke protectors. The resin topped carbon fibre effect protectors offer a rich luxury finish whilst adding both style and providing protection from key and keyring damage to those otherwise exposed metal components.

This particular Red Dynamic Carbon Fibre Yoke Pad is suitable for the Yamaha YZF-R1 '15-'17 models.

This 6-piece Helmet Defender kit adds a layer of protection to certain areas of the helmet, protecting those from helmet bumps when riding with a pillion. As well as scuffs from gloves and general riding wear and tear - Helping keep the helmet in as good condition as possible.

This 6-piece Red Dynamic Helmet Defender kit is universal. The pads can easily be contoured to fit all motorcycle helmets.

Following on from the hugely popular original Denali™ SoundBomb comes the Split SoundBomb. It features the same ear-splitting 120 decibels of sound, but in a much more fitment friendly package. The Denali™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the Split SoundBomb will practically disappear once installed.

Mounting bracket and wiring harness sold separately.

Please...

Producing an massive 113 decibels of sound, the SoundBomb is over twice as loud as a standard motorcycle horn! The Denali™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the SoundBomb will practically disappear once installed.

At 113 decibels, the distinct low-tone sound from the DENALI SoundBomb Mini is over twice as loud as a typical 100 decibel disc horn. Designed to be a direct P...

The DENALI D2 Pods were engineered from the ground up to create the brightest, most efficient, and most durable LED lights. Specifically designed for powersports applications, we focused on generating the most amount of light with the least amount of power draw from your vehicle.

What's In The Box?
(x1) DENALI D2 2.0 LED POD
(x1) M8 Mounting Hardware Kit
(x1) Clear D2 Flood Lens
(x1) Wiring Pigtail

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile. The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic Lens System to give you three unique beam patterns in one kit. Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch. Our DrySeal submersible waterproof construction and Impact PC Bezels create super dur...

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile. The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic Lens System to give you three unique beam patterns in one kit. Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch. Our DrySeal submersible waterproof construction and Impact PC Bezels create super dur...

We are introducing ten new features engineered from the ground up to create the brightest, most efficient, and most durable LED light kits. Specifically designed for powersports applications, we focused on generating the most amount of light with the least amount of power draw from your vehicle. Our 2.0 light kits and accessories provide a complete solution that can handle the most extreme environments.

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile. The all...

We are introducing ten new features engineered from the ground up to create the brightest, most efficient, and most durable LED light kits. Specifically designed for powersports applications, we focused on generating the most amount of light with the least amount of power draw from your vehicle. Our 2.0 light kits and accessories provide a complete solution that can handle the most extreme environments.

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile. The all...

The DENALI D4 Pods were engineered from the ground up to create the brightest, most efficient, and most durable LED lights. Specifically designed for powersports applications, we focused on generating the most amount of light with the least amount of power draw from your vehicle.

What's In The Box?
(x1) DENALI D4 2.0 LED POD
(x1) M8 Mounting Hardware Kit
(x1) Clear D4 True-Hybrid Lens
(x1) Wiring Pigtail

The DENALI DM Pods were engineered from the ground up to create the brightest, most efficient, and most durable LED lights. Specifically designed for powersports applications, we focused on generating the most amount of light with the least amount of power draw from your vehicle.

What's In The Box?
(x1) DENALI DM 2.0 LED POD
(x1) M8 Mounting Hardware Kit
(x1) Clear DM Flood Lens
(x1) Wiring Pigtail

The DENALI DR1 Pods were engineered from the ground up to create the brightest, most efficient, and most durable LED lights. Specifically designed for powersports applications, we focused on generating the most amount of light with the least amount of power draw from your vehicle.

What's In The Box?
(x1) DENALI DR1 2.0 LED POD
(x1) M8 Mounting Hardware Kit
(x1) Clear DR1 True-Hybrid Lens
(x1) Wiring Pigtail

The S4 is the first light DENALI developed as part of the new S-Series product line. At more than 3000 lumens and economically priced, the S4 provides more light per dollar than just about anything else on the market. The new S-Series lights were specifically engineered to reduce cost without sacrificing performance, quality or durability. In fact, the S4 features the same high intensity LEDs as the D-Series lights, but utilize a single-piece optic and sealed beam construction to reduce the numb...

The S4 is the first light DENALI developed as part of the new S-Series product line. At more than 3000 lumens and economically priced, the S4 provides more light per dollar than just about anything else on the market. The new S-Series was specifically engineered to reduce cost without sacrificing performance, quality or durability. In fact, the S4 features the same high-intensity LEDs as the D-Series lights, but utilizes a single-piece optic and sealed beam construction to reduce the number of c...

At over 15,000 lumens, the DENALI D7 light kit is one of the brightest LED lights under 4.5 inches period. A pair of D7s feature 14 high-intensity, 10-watt LEDs that are focused through a proprietary single-piece optic specifically engineered to create a full bodied spot beam that can reach over 1500ft at an intensity of 1.0 lux. A pair of D7s will outshine 14 D2 lights and produces more than twice the light output of the D4. Not only are the new D7s incredibly bright, but they're strong, too. T...

At over 15,000 lumens, the DENALI D7 light kit is one of the brightest LED lights under 4.5 inches period. A pair of D7s feature 14 high-intensity, 10-watt LEDs that are focused through a proprietary single-piece optic specifically engineered to create a full bodied spot beam that can reach over 1500ft at an intensity of 1.0 lux. A pair of D7s will outshine 14 D2 lights and produces more than twice the light output of the D4. Not only are the new D7s incredibly bright, but they're strong, too. T...

These premium MT Series Waterproof Connectors are used in the DENALI 2.0 lights and harnesses. The kit includes both the male and female connector, crimp-on terminals, as well as waterproofing wire seals. Using an affordable crimping tool, these connectors can be crimped onto wires in seconds to modify, customize, or replace electrical connections.

You can also use these connector sets to make plug and play connections of other brands of accessories to the DENALI CANsmart Controller or ...

This Amber TriOptic Lens Kit for DM lights is designed to maximize visibility in foggy and rainy conditions. The amber colour of the lens increases visibility in fog and rain by blocking blue frequencies from the light, which reflects off water vapour and decrease vision. The kit includes two spot lenses and two flood lenses. Use two spots for maximum distance, two floods for the maximum spread, or one of each to create a 50/50 True-Hybrid that combines the best of both worlds.

What's ...

This Amber TriOptic Lens Kit for D4 lights is designed to maximize visibility in foggy and rainy conditions. The amber colour of the lens increases visibility in fog and rain by blocking blue frequencies from the light, which reflects off water vapour and decrease vision. The kit includes two spot lenses and two True-Hybrid lenses. Use two spots for maximum distance, two Hybrid lenses for a 50/50 True-Hybrid or one of each to create a Spot-Hybrid that adds some additional close range fill while ...

This DENALI DataDim Dual-Intensity Controller enables the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. All DENALI 2.0 Light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.

What's In The Box?
(x1) DataDim Dual-Intensity Controller
(x1) Dual-Intensity Trigger Wire

This premium DENALI DrySeal ON-OFF Waterproof Switch can handle a load up to 15 Amps and is ideal for controlling many different accessories such as auxiliary lighting. The kit includes both handlebar switch mounting bands, as well as an adhesive pad for surface mounting.

In addition to moulded silicone gasket seals, we use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when...

This Amber TriOptic Lens Kit for DM lights is designed to maximize visibility in foggy and rainy conditions. The amber colour of the lens increases visibility in fog and rain by blocking blue frequencies from the light, which reflects off water vapour and decrease vision. The kit includes two spot lenses and two flood lenses. Use two spots for maximum distance, two floods for the maximum spread, or one of each to create a 50/50 True-Hybrid that combines the best of both worlds.

What's ...

This Amber TriOptic Lens Kit for DR1 lights is designed to maximize visibility in foggy and rainy conditions. The amber colour of the lens increases visibility in fog and rain by blocking blue frequencies from the light, which reflects off water vapour and decrease vision. The kit includes two spot lenses and two True-Hybrid lenses. Use two spots for maximum distance, two Hybrid lenses for a 50/50 True-Hybrid or one of each to create a Spot-Hybrid that adds some additional close range fill while...

An all-purpose cleaner (500ml bottle) designed to quickly cut through traffic film and road grime on your bike. Formulated to leave a great finish and is safe to use on paintwork, plastic, rubber, aluminium, chrome, carbon fibre and disc pads – basically all over the bike! Simply spray on and rinse off. Cleans in minutes!

FEATURES AND BENEFITS
• Rapidly cuts through dirt and grime.
• Fully biodegradable.
• Water-based and solvent free.
• Low odour.
• Contains no harm...

A colourless fully synthetic lubricant with strong adhesive properties designed for high speed, high stress applications such as motorcycle chains. Initial low viscosity allows for penetration into links before the product rapidly thickens to help prevent throw-off. Regular use helps maintain the performance and life of your chain.

FEATURES AND BENEFITS
• Long lasting lubrication.
• Fully synthetic.
• Contains Extreme Pressure and Anti Wear additives for improved load resist...

Designed to leave your bike with a deep glossy shine. The formula contains Carnauba Wax, one of the hardest naturally occurring waxes, which provides a wet look finish and long lasting shine. It’s great for repelling water, allowing it to bead off paintwork to maintain a fantastic finish for longer. It’s easy to apply and streak free.

FEATURES AND BENEFITS
• Contains Carnauba Wax for durability and fantastic finish
• Contains Bees Wax for improved shine and ease of application. ...

GT85® is a tried and tested multi-purpose lubricant, with multiple uses to help complete tasks around the home and at work. No matter how big or small the project, GT85® gives you everything you need all in one can.

Product Benefits
Loosens rusted parts
Prevents squeaking
PTFE formula helps lubricate
Drives out moisture from electrical systems
Fast acting cleaner
Versatile and easy to use
Product Uses
Lubricating and cleaning
Driving out moisture from...

A white calcium grease based lubricant with strong adhesive properties designed for high speed, high stress applications such as motorcycle chains. It applies wet enabling penetration into links before thickening. Providing lasting lubrication and protection for your chain (O, X, Z ring compatible). Its exceptional long lasting action makes it particularly suitable for dry conditions. It’s also quick drying and provides outstanding anti-fling properties. Regular use helps maintain the performanc...

Easy to use, WD40 Chain Cleaner and quickly removes dirt, grime, dust and oil from chains. Compatible with O, X and Z ring chains the formula blasts off contaminants and dries in minutes. A water dispersible degreaser designed to solubilise newly deposited, oxidized or aged greases and oils. Suitable for subsequent removal by rinsing with cold water. Regular cleaning helps to reduce wear on the chain to maintain performance for longer.

FEATURES AND BENEFITS
• Softens and solubilises...

Designed to give an all over great shine to your bike. The fast evaporating formula acts quickly and is easy to apply with no need to buff. Its light and fruity fragranced polish for internal and external automotive non-porous surfaces. Can also be used as a light duty lubricant for metal, plastic and rubber parts. Ideal for Rubber Parts, Paintwork, Carbon Fibre Parts and Metals

FEATURES AND BENEFITS
• Freshens and shines.
• Reduces friction.
• helps prevent cracking / prema...

Designed to quickly remove brake dust, dirt, oil, and brake fluid from brake and clutch systems. The fast working formula dries in minutes and leaves no residue. Regular cleaning helps brake discs and pads last longer.

FEATURES AND BENEFITS
• High pressure jet aperture for precise application into areas of difficult accessibility.
• 360° valve allows inverted use, where required, for awkward areas of application.
• High discharge rate provides “flush” washing properties.

An all-purpose cleaner (1 Litre bottle) designed to quickly cut through traffic film and road grime on your bike. Formulated to leave a great finish and is safe to use on paintwork, plastic, rubber, aluminium, chrome, carbon fibre and disc pads – basically all over the bike! Simply spray on and rinse off. Cleans in minutes!


FEATURES AND BENEFITS
• Rapidly cuts through dirt and grime.
• Fully biodegradable.
• Water-based and solvent free.
• Low odour.
• Contains ...

Unlike its Smart Straw predecessor it keeps its shape, so it is ideal for precision work in a wide variety of sectors.

Flexible also has a taller, thinner 400ml can which cleverly reduces overuse and waste, as well as allowing for a longer straw. The Spray 2 Ways technology and the 360° valve allow the product to be applied in almost any position. The Flexible Straw allows you to Reach The Unreachable!

What WD-40 Flexible does:
Longer straw means you can reach the unreachab...

WD-40 Smart Straw is the same reliable Multi-Use Product, specially designed for precision application. The Smart Straw applicator is great for reaching those tight spaces in gears and mechanisms.

The clever design also incorporates Spray 2 Ways technology. Simply flip the Smart Straw down against the can, and the wide spray nozzle is still at your disposal should you need greater coverage.

What WD-40 Smart Straw does:
360° valve allows for upright or upside down applicatio...

If you use WD-40 Multi-Use Product in the workplace, an aerosol can is often not large enough for all your needs. Therefore, we offer WD-40 Multi-Use Product in a 5L container, for professional users and industry-specific needs.

When it comes to moisture displacement, lubrication and removing stubborn grease and grime, WD-40 Multi-Use Product is unrivalled, and with our Multi-Use 5L Containers, you’ll never be left stuck without.

What WD-40 Multi-Use Product does:
Displaces...

The Speed Angle APEX GPS Lap timer is an essential accessory for any racer or trackday rider, the data it collects helps riders to analyze their riding style easily, and provide an efficient way to improve the riding skill. You can easily overlay your logs and GPS tracking data onto Google Earth and have your rides replayed 3-dimensionally on the satellite photo images of the track. There is no limit to the tracks that can be overlaid onto (as long as they are available on Google Earth). You can...

OK, it may look just like a normal sponge or be it cut into a cute looking V shape but that's where the similarity ends between the V2 Sponge™ and the thing that you use to clean the dishes!

The incredible V2 Sponge™; Unlike a normal sponge or cleaning cloth whose fibres just slide over the muck that's left on your visor, The V2 Sponge actually cut into it like little cheese wires and lift it away. Whilst ruthless at removing bug debris the V2 won't damage a visors Anti-Scratch treatmen...

We've all fallen victim to a painful/numb rear end after a long day in the saddle! Wild Ass air seat cushions help fix that discomfort and are available in a range of styles and finishes, from cruisers to supersport! Spreading the rider's weight across the entire cushioned area helps eliminate painful pressure points from forming and promotes blood circulation by utilising pressure adjustable interconnected air cells.

We've all fallen victim to a painful/numb rear end after a long day in the saddle! Wild Ass air seat cushions help fix that discomfort and are available in a range of styles and finishes, from cruisers to supersport! Spreading the rider's weight across the entire cushioned area helps eliminate painful pressure points from forming and promotes blood circulation by utilising pressure adjustable interconnected air cells.

We've all fallen victim to a painful/numb rear end after a long day in the saddle! Wild Ass air seat cushions help fix that discomfort and are available in a range of styles and finishes, from cruisers to supersport! Spreading the rider's weight across the entire cushioned area helps eliminate painful pressure points from forming and promotes blood circulation by utilising pressure adjustable interconnected air cells.

Replace damaged or corroded Center Stem/Yoke Nuts with more colourful options! Made of high tensile anodised aluminium.

RDMoto Paddock Stand Bobbins are available in a range of style and size options to fit most bike models and allows the use of a hook equipt paddock stand to lift the rear of the motorcycle off the ground to aid in tyre changes and motorcycle chain and wheel maintenance.

Available in a range of colour options to suit your bike including: Blue, Gold, Black, Green, Orange, Red and Silver

Available in a range of coloured anodised Aluminium options, RD Moto Oil Filler Cap directly replace the OE oil cap with a more colourful and stylish variant. Installation and tightening is a breeze thanks to the hex key/Allen key socket atop the cap and they include a replacement O ring seal to ensure a perfect seal.

This RD-Moto Oil Filler Cap (sized M27x3.0) is suitable for the Yamaha YZF-R1, YZF-R6, MT07 (FZ-07) and MT10 models (see application list above for more compatible bikes).