Shop By BikeSetting the standard in crash protection and bolt-on motorcycle accessories.

This 6-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go through a PVD (physical vapour deposition) treatment, ensuring longevity and corrosion resistance.

• Only use Manufacturer torque settings, between 33 - 45nm.
• Kits are offered as bike-specific fitments. If you have a variation of a standard model you may require an alternative kit. ...

R&G Aero Crash Protectors feature our stylish, aerodynamic Aero Bobbins and are available in Orange. Suitable for the Yamaha MT-25 / MT-03 '16- models.

R&G Crash Protectors offer core motorcycle protection, keeping the frame, engine, fairing and other critical components off the ground in the event of a crash, drop or slide.

R&G Aero Crash Protectors feature our stylish, aerodynamic Aero Bobbins and are available in Black orWhite. Suitable for the Yamaha MT-25 / MT-03 (2016 onwards) models. Offering core motorcycle protection, keeping the frame, engine and other critical components off the ground in the event of a crash or slide.

R&G Aero Bobbins from R&G - the market leaders in crash protection and the only insurance-approved crash protectors on the market. As used by some of the world's top race teams, wh...

Tidy up the rear end of the Yamaha R25 '14-, MT-25 '15-, MT-03 '16- and R3 '15- models with an Aluminium R&G Tail Tidy/Licence Plate Holder.

Made from Aluminium for strength and weight saving, powder coated black for great looks and durability. Our tail tidy units are easy to fit and transform the rear of the bike removing the expansive OEM licence plate holders replacing them with a much slicker looking unit, tucking the number plate up underneath the rear seat unit.

This mo...

Available in black, titanium, dark blue and red powder coat finishes to fit the Yamaha YZF-R25 '14- and YZF-R3 '15- and the MT-25 and Yamaha MT-03 '16- models. Made from pressed aluminium and feature a neat, seamless frame (where applicable).  They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris.

Please note, Dark Blue and Red are special order and have a slightly longer lead time.

Our Branded Radiator Guards have been specially designed with bike enthusiasts in mind, each kit containing a unique design made to complement your bike. These exciting new Branded Radiator Guards are more than just visually outstanding, their stainless steel construction allows the guard to be incredibly strong and impervious to rust. Each laser-cut guard is crafted with a specific bike series in mind, boasting a distinctive design, while still allowing maximum airflow to the radiator so that c...

This specific Race Series Engine Case Cover is compatible with the Yamaha YZF-R25 '14-, YZF-R3 '15-, MT-03 '16- & MT-25 '16- models protecting the exposed Left Hand Side Engine Casing from damage in the event of a crash, drop or slide.
Please note that this case is NOT compatible with the road fairings, and as such can only be used with race fairings.
R&G Race Series Engine Case Covers have been specifically developed in collaboration with selected high-level race teams and crash tested...

This specific Race Series Engine Case Cover is compatible with the Yamaha YZF-R25 '14-, YZF-R3 '15-, MT-03 '16- & MT-25 '16- models protecting the exposed Right Hand Side Engine Casing from damage in the event of a crash, drop or slide.
Please note that this case is NOT compatible with the road fairings, and as such can only be used with race fairings.
R&G Race Series Engine Case Covers have been specifically developed in collaboration with selected high-level race teams and crash tested...

Suitable for the Yamaha YZF-R25 '14-, YZF-R3 '15-, MT-03 '16- & MT-25 '16- models. Protecting the left Hand Engine Casing from damage in the event of a crash, drop or slide.

Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) has been approved by the British Superbike Championship (BSB) and the Mo...

Suitable for the Yamaha YZF-R25 '14-, YZF-R3 '15-, MT-03 '16- & MT-25 '16- models. Protecting the right Hand Engine Casing from damage in the event of a crash, drop or slide.

Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the ...

Suitable for the Yamaha YZF-R25/R3 '15- and MT-25/MT-03 '16-.Our industry leading race series engine case covers are now available in kit form containing all the engine case covers R&G offer for your bike in one go. Developed on track and brought to the road, R&G Engine Case Covers bring BSB and Moto America race series approved levels of engine cover protection to your bike for complete peace of mind.

Made in the U.K.

These bar end protectors have been specially developed for the Yamaha R25 '14-, MT-25 '15-, Yamaha R3 '15-, MT-03 '16- and NMAX 125 '17- models.

Helping to protect those expensive levers and handlebars from damage in the event of a drop or crash.

Easy to install they simply screw into the end of the OEM bars.

Awarded RiDE magazine Best buy award status.

R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.

Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and scooters). In only 2 minutes the grips heat up to 35°C (95°F) and on those r...

R&G Premium Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.

All new Premium Features:
-Heat Setting Memory
-Auto Cut-Out
-Fully Waterproof
-New Grip Design

Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and...

Improve your vision, confidence and safety all year round while you ride!

This ground-breaking product enables you to WASH your visor while on the bike.

Unique wash/wipe action that’s incredibly easy to use: 1. Fill the tank with Visorcat wash (supplied). 2. Wash by moving Visorcat across your visor one way. 3. Wipe the residue away by moving Visorcat across your visor in the other direction. The result is 100% clear vision in all conditions. Keep the sponge clean by rinsing i...

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filters; again potentially causing front brake engagement.

These cotton reels mount directly into the mounting points on the rear swingarm offering the best of both worlds in terms of crash protection and functionality with the ability to use R&G cotton reels, which offer excellent crash protection to those components located towards the rear as well as the ability to lift up the rear of the bike with a paddock stand for maintenance and tyre changes.

Available in Black, White or Orange.

Sold in Pairs.

These fork protectors are suitable for the Yamaha R25 '14-, MT-25 '15-, R3 '15-, MT-03 '16- models.

Easy to install, they help to eliminate damage to the front forks, fork bottoms and brake calipers during a crash or drop by keeping them lifted off the ground and out of harms way.

These swingarm protectors, for the Yamaha R25 '14-, MT-25 '15- and R3 '15- models fit into the rear spindle and provide added protection to the swingarm area and swingarm components.

Easy to install, they help keep those core components found in the swingarm area such as the rear brake caliper, disc, Rear sprocket and swingarm lifted up off the ground and out of harms way in the event of a crash.

Please note: Paddock stand bobbins / Paddock stand (as seen in pictures) are NOT i...

R&G Tank Traction Grips have been specially designed for the Yamaha R25 '14-'18, MT-25 '15-, R3 '15-'18 & & MT-03 '16-'19 models.

R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body positio...

Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.

Patent No: GB2459728

This Exhaust Hanger kit includes both an Exhaust Hanger and Rear Footrest Blanking Plate enables the removal and the pillion pegs (from both sides) for that racing bike look, whilst also allowing for your exhaust to be properly supported. Finished in black, this stylish R&G Exhaust Hanger Kit has been specially designed to fit the Yamaha MT-25 '15- & MT-03 '16- models, featuring a printed graphic at its centre.

Both parts are made from 6mm aluminium and featuring a modern design, the Ex...

This stylish R&G Exhaust Hanger has been specifically designed for the Yamaha MT-25 '15- model and not only reduces weight, but also gives the bike a sportier, sleeker look. With a classy, black, powder coated finish and vivid MT-25 graphics, it is made from sturdy, aircraft-grade aluminium and will retain its good looks for many years.

Tidy up the rear of your Yamaha MT-25 with an R&G Foot Rest Blanking Plate kit.

Once you have removed the rear footrest pillion hangers, fill the void left behind and cover those otherwise exposed holes in the subframe with an R&G blanking plate.

Suitable for the Yamaha MT-25 '15-.

R&G blanking plates are easy to install, simply screwing into place, covering those otherwise exposed subframe holes, that if left uncovered could result in corrosion of the frame/subframe...

R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors.

In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0002 (see related products below) - in some cases more than one resister must be used inline.

Supplied as a pair

The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators for the following manufacturers: Honda, Kawasaki & Yamaha.

Please check the existing Indicator Relay where possible before ordering - if you are still unsure please ask your local dealer.

R&G Racing's road-racing inspired toe guard has been developed and designed to give maximum protection combined with great looks. Made from aluminium for a lightweight and strong product it features pre-drilled holes attaching to the existing mounts on the swingarm, ensuring effective coverage of the sprocket.

This racing Toe Guard is compatible with the Yamaha YZF-R1/R1M '15-, R25 '14-, MT-25 '15-, MT-10 '16- & SP '17-, MT-03 '15- and the R3 '15- models.

No modifications to ...

These Mirror Risers are made from 6082 T6 Aluminium and are suitable for any bike with an M10x1.25 threaded mirror socket.

Suitable for the Ducati Hypermotard 821 '13-, Ducati Hyperstrada 821 '13-, Hypermotard 950 '19-, Royal Enfield Interceptor 650 ’19-, Zero DSR '19-, Zero FX '19- and Royal Enfield Continental GT 650 ’19- along with any bike with a M10x1.25 mirror mounting point.

Risers are perfect for increasing rearward visibility while riding. This extender raises the mi...

R&G Chain Cleaner quickly removes all containments from your chain. Our formula breaks down even the toughest grime for easy,  stress-free cleaning. For added cleaning power, consider using a brush to agitate contaminants before rinsing. 

R&G Motorcycle Degreaser effectively removes built-up grime from your machine. Safe to use on metal, plastic and rubber, our specialised formula will cut through even the toughest grime, leaving a clean, 'like-new' finish. For added cleaning power, consider using a brush to agitate contaminants before rinsing. 

R&G Disk Brake Cleaner can improve overall braking performance while prolonging the life of you brake discs and pads. Our formula is specially designed to remove brake dust, oil and any other contaminants that may affect braking performance. 

R&G Silicone Shine leaves your machine looking as good as it did right from the factory. Our formula guarantees a deep, grime resistant shine. 

R&G Helmet Fresh completely eradicates all odour from inside your helmet, leaving a fresh 'new helmet scent' every time! Our fast-drying formula will leave your helmet fresh and bacteria-free for those long rides. R&G Helmet Fresh is suitable for use on all fabrics. Why not try it on your gloves or clothing? 

R&G Nano Bike Wash effortlessly breaks down and removes all dirt, grime and contaminants that may be on your machine after the hardest rides. Our specially-created formula biodegradable formula makes cleaning your machine a pleasure and leaves it looking its best!

R&G Nano Bike Wash effortlessly breaks down and removes all dirt, grime and contaminants that may be on your machine after the hardest rides. Our specially-created formula biodegradable formula makes cleaning your machine a pleasure and leaves it looking its best!

R&G Waterlesss Bike Wash is the easiest way to remove light contaminants from your machine between major washes. Our special formula effortlessly cleans all surfaces - with no water necessary! It leaves a streak-free, non-sticky, high shine from just one application. 

R&G Anti-fog Solution prevents your vision from being obscured while on the go! Our formula creates a super-thin, transparent nanolayer to prevent your visor, goggles and eyewear from fogging up. 

R&G Helmet & Visor Cleaner quickly removes all contaminants from helmets, visors and eyewear, Our specially-created PH-neutral formula is safe to use on all helmets and is fully biodegradable. 

R&G Everyday Chain Lube offers maximum protection for your chain over long distances, in all weathers. Our formula penetrates deep into the chain links, offering extreme lubrication with no fling. Suitable for both road and off-road use. for easy removal, after you ride, use R&G Nano Bike Wash and Chain Cleaner. 

R&G Dry Chain Lube provides the ultimate protection for your chain in dry and dusty conditions. Our wax-based formula ensures maximum lubrication while not attracting dirt and grit for a clean ride. For easy removal after your ride, use R&G Nano Bike Wash and Chain Cleaner. 

R&G Wet Chain Lube provides the ultimate protection for your chain in the harshest conditions imaginable. Our super sticky formula penetrates deep into the chain links offering extreme lubrication no matter how wet the ride. For easy removal after your ride, use R&G Nano Bike Wash and Chain Cleaner. 

The R&G Superbike Outdoor Cover has been redesigned for 2017 to include many new features. Based off our original award winning design and made of quality waterproof material, the cover also features elasticated rim and Belly straps as standard ensure the cover stays fixed in place and stops wind, mud or water getting up inside the cover and ensure a tight fit around the base. Front and rear chain loops for security devices covered by a velcro® closing flap to ensure the cover is fully waterproo...

The wireless system does not need any programming and features a compact LCD screen which fits into a magnetic mount placed on a prominent part of the bike. The fully sealed and buttonless device can be easily removed for security when parking unattended and is small enough to fit in a pocket.

R&G Rim Tape is designed specifically for 17" motorcycle wheels. Using only the highest-quality material available R&G's Rim Tape is designed to give years of service!

Available, in a large range of colours and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel w...

Keep your clutch reservoir protected with our handy Clutch Reservoir Protector (Booty)!

Now available in Black with White logo or Orange with Black logo!

Take care of your helmet with our R&G Racing Deluxe Helmet Bag!Made from a tough, hard-wearing outer and fleece lining, this universal helmet bag protects against dust and light knocks.

Our revolutionary tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike. ** Part does not include Ratchet Straps ** R&G Racing Handlebar Top Straps ST0001BL R&G Racing Handlebar Top Straps, 25mm Ratchet Straps, RG, R&G Racing, bike parts, motorbike supplies

Our Visor Pouch/Protector is compatible with all major brand visors. Ideal for carrying a spare clear visor for when it gets dark or vice versa. Equipped with a high-quality fastex buckle and belt (expandable up to 48 inches) and features a fleece-lined interior to keep your visor in best condition - coupled with a large Velcro closing tab, making the visor easy to get out when needed and ensuring it stays safe and secure when not.


Comes with reflective "R&G" logo and text to help ...

Give your visor that racing look as used by many R&G supported riders in BSB and around the world.

Supplied as a pair.

R&G Heat Shield has been specifically designed to protect components from the damaging effects of radiant heat. It features a composite construction of aluminium foil, silicone adhesive, glass cloth and flame resistant polyurethane, optimising barrier performance up to 500 degrees C, with minimal weight and material thickness. Presented in a self-adhesive format making it simple to install.

It has a higher than average 20mu aluminium foil face making it extremely durable and resilient e...