Shop By BikeSetting the standard in crash protection and bolt-on motorcycle accessories.
You're viewing All Products for Yamaha - MT-09 Street Rally
Showing 1-50 of 124 results
This 6-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go through a PVD (physical vapour deposition) treatment, ensuring longevity and corrosion resistance.
• Only use Manufacturer torque settings, between 33 - 45nm.
• Kits are offered as bike-specific fitments. If you have a variation of a standard model you may require an alternative kit. ...
This Crash Protector kit is suitable for the Yamaha MT-09 (2013-2016), FZ-09 (2013-2016), MT-09 TRACER ('15- onwards), XSR900 (2016 onwards) & Tracer 900 GT '18-, installing into existing engine/frame mounts, they offer essential protection to the bike frame, engine and radiator keeping them raised up and away from the tarmac in the event of a crash or drop.
This kit requires NO modification to install, installing into the front frame mount.
R&G Aero Bobbins from R&G - the m...
Our industry leading crash protectors are now available for the Yamaha MT-09 (2013 onwards), MT-09 TRACER ('15- onwards), MT-09 SP '18-, XSR900 '16- & Tracer 900 GT '18-. Installing into the existing middle engine/frame mounts, they offer essential protection to the bike frame, engine and radiator keeping them raised up and away from the tarmac in the event of a crash or drop.
This kit requires NO modification to install, installing into the middle frame mount.
R&G Aero Bobbi...
Our industry leading crash protectors are now available for the Yamaha MT-09 / FZ-09 '13-, MT-09 Sport Tracker/Street Rally '15-'16, MT-09 TRACER ('15- onwards), SP '18- & Tracer 900 GT '18- models they offer essential protection to the bike frame, engine and radiator keeping them raised up and away from the tarmac in the event of a crash or drop. Comprising a machined bar spanning between the two frame mounts
This kit requires no modification to install.
R&G Aero Bobbins from ...
This R&G Radiator Guard is available in black or titanium to fit the Yamaha MT-09 ’13-’16 NON ABS & ABS MODELS, MT-09 ‘Street Rally’/ABS models protecting the radiator guard from damage from road debris.
Made from pressed aluminium and feature a neat, seamless frame (where applicable). They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris.
No permanent modifications need to be made to the bike.
This radiator gua...
The R&G Stainless Steel Radiator Guard series is a more rugged version of our existing aluminium offering and are aimed particularly for Adventure bikes.
Constructed from 1mm stainless steel sheet allows the guard to be incredibly strong and impervious to rust – perfect for bikes and riders who may tackle demanding terrains and conditions.
The laser-cut grills are designed for maximum airflow to the radiator so that cooling isn't compromised; the Radiator Guard is as good loo...
Compatible for the left-hand side Water Pump and Generator case cover for the Yamaha MT/FZ-09 '13- (FZ-09), SP '18-, Tracer 900GT '18- & Niken '18- model.
Made in the U.K.
Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) an...
Compatible for the right-hand side Pulse case cover for the Yamaha MT-09/FZ-09 '13- (FZ-09), SP '18-, Tracer 900GT '18- & Niken '18-.
Made in the U.K.
These exciting new Engine Case Covers have been developed in collaboration with selected race teams and crash tested within the R&G Racing Suzuki GSX-R Trophy. Crafted from 4mm polypropylene for strength, durability and good looks, they complement our crash protectors perfectly.
The covers simply bolt on over the origin...
Compatible for the right-hand side Clutch case cover for the Yamaha MT-09/FZ-09 '13- (FZ-09), SP '18-, Tracer 900 GT '18- & Niken '18- model.
Made in the U.K.
Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAm...
Suitable for the Yamaha MT-09 / FZ-09 '13-, Tracer 900 GT '18- & Niken '18-
Made in the U.K.
Our industry-leading Engine Case Covers are now available in kit form containing all the covers R&G offer for your bike in one go. Developed on track and brought to the road, R&G Engine Case Covers bring BSB and Moto America race series-approved levels of engine protection to your bike for complete peace of mind.
Extensively used around the world by thousands of road riders, ...
These bar end protectors are suitable for a range of Yamaha models. Click 'more info' to view more specific details.
This Kaoko Throttle Stabilizer kit is designed to fit the Yamaha MT-09, SP and MT-07 (FZ-07/FZ09) & YZF-R125 '19-
Awarded RiDE magazine Best buy award status.
R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.
Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and scooters). In only 2 minutes the grips heat up to 35°C (95°F) and on those r...
based on 1 review
R&G Premium Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.
All new Premium Features:
-Heat Setting Memory
-Auto Cut-Out
-Fully Waterproof
-New Grip Design
Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and...
Eliminate that annoying spinning grip by getting a tube of grip glue. Holds grips firmly in place. Helps to reduce arm pump caused by trying to hold spinning grips in place.
Ideally suited to be used when installed R&G Heated Grips.
Improve your vision, confidence and safety all year round while you ride!
This ground-breaking product enables you to WASH your visor while on the bike.
Unique wash/wipe action that’s incredibly easy to use: 1. Fill the tank with Visorcat wash (supplied). 2. Wash by moving Visorcat across your visor one way. 3. Wipe the residue away by moving Visorcat across your visor in the other direction. The result is 100% clear vision in all conditions. Keep the sponge clean by rinsing i...
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filters; again potentially causing front brake engagement.
Cotton ReelsCR0002BK, CR0002WH, CR0002OR
These cotton reels mount directly into the mounting points on the rear swingarm offering the best of both worlds in terms of crash protection and functionality with the ability to use R&G cotton reels, which offer excellent crash protection to those components located towards the rear as well as the ability to lift up the rear of the bike with a paddock stand for maintenance and tyre changes.
Available in Black, White or Orange.
Sold in Pairs.
Easy to install, they help to eliminate damage to the front forks, fork bottoms and brake callipers during a crash or drop.
These fork protectors are suitable for the Yamaha MT-09 '13-, SP '18-, Sport Tracker '15-, Street Rally '15-, MT-09 Tracer '15-, XSR900 '16- & Tracer 900GT '18-
This Boot Guard kit has been specially designed for the Yamaha MT-09 (FZ-09), Sport Tracker, Street Rally, MT-09 Tracer (FJ-09), SP '18- model, XSR900 & Tracer 900GT '18- models.
R&G Boot Guard kits are available for a large range of bike styles and brands, with new applications released regularly. The unique R&G texture was specifically designed to be durable, providing the rider with a buffer between his boot on the exposed areas of the swingarm which can (on occasion) come into conta...
Completely enclosing the motorcycles rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.
Patent No: GB2459728
Tidy up the rear of your bike, once you have removed the rear footrest hangers, with this blanking plate. Suitable for both the left and right-hand sides of the Yamaha MT-09/FZ09, Tracer/FJ09, Street Rally, Stree Tracker, XSR900 & Tracer 900 GT '18-. This kit also includes the reservoir bracket.
These blanking plates simply screw in, covering those otherwise exposed subframe holes left once the rear footrests have been removed keeping them free from of dirt buildup.
Supp...
Never forget your sidestand puck again!
Kickstand Shoes bolt onto the bottom of the sidestand, to enlarge the original’s footprint by up to 100%, significantly spreading the load placed upon it, to help prevent the stand ‘piercing’ the ground. Despite this enlargement, the Shoe does not affect ground clearance or interfere with the chain run during normal riding.
This particular model fits the Yamaha MT-09 (FZ-09), XJ6N '09- and XJ6 Diversion '09-.
R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.
If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors.
In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0002 (see related products below) - in some cases more than one resister must be used inline.
Supplied as a pair
The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators for the following manufacturers: Honda, Kawasaki & Yamaha.
Please check the existing Indicator Relay where possible before ordering - if you are still unsure please ask your local dealer.
R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of our iconic Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs, they come with clear lenses and illuminate on the side for additional visibility.
Available in two colour options: Black or Silver.
Can be used on the front or rear of the bike.
If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors. ...
Are your micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you will find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.
** Supplied as a pair **
These resistors are for the R&G Bulb Indicators. If you have R&G LED indicators, please use RGR0002
These indicator adapters are made to suit the Yamaha YZF-R1, Yamaha MT-07 , Yamaha MT-09 & SP model, Yamaha YZF-R25, Yamaha XSR700, Yamaha R3 and Yamaha Tracer 700 models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Micro Indicators not included.
These Air Intake Covers have been specifically designed for the Yamaha MT-09 (FZ-09) upto 2016.
Easy to install they give the air intakes cowls a meaner look.
This R&G Fender Extender is compatible with the Yamaha MT-09 / FZ-09 & SP '18- model / FJ-09 Tracer models.
R&G Fender Extenders offer additional protection to front-mounted coolers, downpipes and fairing panels from debris, road grit, mud and water kicked up by the front wheel. Attaching to the motorcycle's front mud guard / fender via included adhesive strips and push rivets, installation takes only minutes.
These Mirror Risers are made from 6082 T6 Aluminium and are suitable for any bike with an M10x1.25 threaded mirror socket.
Suitable for the Ducati Hypermotard 821 '13-, Ducati Hyperstrada 821 '13-, Hypermotard 950 '19-, Royal Enfield Interceptor 650 ’19-, Zero DSR '19-, Zero FX '19- and Royal Enfield Continental GT 650 ’19- along with any bike with a M10x1.25 mirror mounting point.
Risers are perfect for increasing rearward visibility while riding. This extender raises the mi...
R&G Chain Cleaner quickly removes all containments from your chain. Our formula breaks down even the toughest grime for easy, stress-free cleaning. For added cleaning power, consider using a brush to agitate contaminants before rinsing.
R&G Motorcycle Degreaser effectively removes built-up grime from your machine. Safe to use on metal, plastic and rubber, our specialised formula will cut through even the toughest grime, leaving a clean, 'like-new' finish. For added cleaning power, consider using a brush to agitate contaminants before rinsing.
R&G Disk Brake Cleaner can improve overall braking performance while prolonging the life of you brake discs and pads. Our formula is specially designed to remove brake dust, oil and any other contaminants that may affect braking performance.
R&G Silicone Shine leaves your machine looking as good as it did right from the factory. Our formula guarantees a deep, grime resistant shine.
R&G Helmet Fresh completely eradicates all odour from inside your helmet, leaving a fresh 'new helmet scent' every time! Our fast-drying formula will leave your helmet fresh and bacteria-free for those long rides. R&G Helmet Fresh is suitable for use on all fabrics. Why not try it on your gloves or clothing?
R&G Nano Bike Wash effortlessly breaks down and removes all dirt, grime and contaminants that may be on your machine after the hardest rides. Our specially-created formula biodegradable formula makes cleaning your machine a pleasure and leaves it looking its best!
R&G Nano Bike Wash effortlessly breaks down and removes all dirt, grime and contaminants that may be on your machine after the hardest rides. Our specially-created formula biodegradable formula makes cleaning your machine a pleasure and leaves it looking its best!
R&G Waterlesss Bike Wash is the easiest way to remove light contaminants from your machine between major washes. Our special formula effortlessly cleans all surfaces - with no water necessary! It leaves a streak-free, non-sticky, high shine from just one application.
R&G Anti-fog Solution prevents your vision from being obscured while on the go! Our formula creates a super-thin, transparent nanolayer to prevent your visor, goggles and eyewear from fogging up.
R&G Helmet & Visor Cleaner quickly removes all contaminants from helmets, visors and eyewear, Our specially-created PH-neutral formula is safe to use on all helmets and is fully biodegradable.
R&G Everyday Chain Lube offers maximum protection for your chain over long distances, in all weathers. Our formula penetrates deep into the chain links, offering extreme lubrication with no fling. Suitable for both road and off-road use. for easy removal, after you ride, use R&G Nano Bike Wash and Chain Cleaner.
R&G Dry Chain Lube provides the ultimate protection for your chain in dry and dusty conditions. Our wax-based formula ensures maximum lubrication while not attracting dirt and grit for a clean ride. For easy removal after your ride, use R&G Nano Bike Wash and Chain Cleaner.
R&G Wet Chain Lube provides the ultimate protection for your chain in the harshest conditions imaginable. Our super sticky formula penetrates deep into the chain links offering extreme lubrication no matter how wet the ride. For easy removal after your ride, use R&G Nano Bike Wash and Chain Cleaner.
These anodised aluminium paddock stand bobbins are suitable for most Aprilia, Triumph and Yamaha models.
Supplied in pairs and available in 3 colour options.
Ideally suited to work with our Elevation series paddock stands.
Please carefully check your bike to ensure the Paddock Stand/Cotton Reel mounts are the correct size before purchasing.
These covers are breathable, soft and elasticated. They can also be spun dry.
Ideal for keeping your pride and joy spotlessly clean over the winter or when put back into indoor after cleaning!
Made from a high quality breathable material that allows the air to constantly travel through.
Available in Black with Silver logo and piping or Red with White logo/piping.
The R&G Superbike Outdoor Cover has been redesigned for 2017 to include many new features. Based off our original award winning design and made of quality waterproof material, the cover also features elasticated rim and Belly straps as standard ensure the cover stays fixed in place and stops wind, mud or water getting up inside the cover and ensure a tight fit around the base. Front and rear chain loops for security devices covered by a velcro® closing flap to ensure the cover is fully waterproo...
The wireless system does not need any programming and features a compact LCD screen which fits into a magnetic mount placed on a prominent part of the bike. The fully sealed and buttonless device can be easily removed for security when parking unattended and is small enough to fit in a pocket.
16-Piece Modular Motorcycle Rim TapeRIMTAPE0001BLUE, RIMTAPE0001DKBLUE, RIMTAPE0001GR, RIMTAPE0001OR, RIMTAPE0001RE, RIMTAPE0001WH, RIMTAPE0001YE
R&G Rim Tape is designed specifically for 17" motorcycle wheels. Using only the highest-quality material available R&G's Rim Tape is designed to give years of service!
Available, in a large range of colours and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel w...
From sportsbikes to cruisers, R&G Tank Pads help protect your fuel tank, in style, from unwanted marks, as well as scratches from zippers/buckles and general wear and tearr with our newly developed 3 piece modular tank pad.
Please note: R&G Tank Traction Grips grips shown on the sides of the tank ARE NOT included but are available separately.
Filter Results