Shop By BikeSetting the standard in crash protection and bolt-on motorcycle accessories.

This 5-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go through a PVD (physical vapour deposition) treatment, ensuring longevity and corrosion resistance.

• Only use Manufacturer torque settings, between 33 - 45nm.
• Kits are offered as bike-specific fitments. If you have a variation of a standard model you may require an alternative kit. ...

These crash protectors are suitable for the Suzuki SV650 produced up to 2002 unfaired, with bikini fairing and fully faired.

These crash protectors are suitable for the Suzuki SV650 K3/K4 unfaired/bikini fairing.

These crash protectors are suitable for the Suzuki SV650 unfaired/bikini fairing from K5-L1 (2005-2011). PLEASE NOTE: The aluminium blocks are anodised black to match the black frame of the K5- models.

Universal Licence plate adapters to suit different number plates hole widths, once installed enable a certain amount of flexibility when fitting the a number plate, replacing the need to redrill your number plate.

Available in a one size fits all.

Supplied in pairs.

NO TAIL TIDY BRACKET IS SUPPLIED WITH THIS KIT

Tidy up your bike's rear end with this R&G Tail Tidy. Suitable for the Suzuki SV650 2007-2012

Tidy up your bike's rear end with this R&G Tail Tidy/Licence Plate Holder for the Suzuki SV650 '03-'06 models and SV1000.

Made from Stainless Steel plate and powder coated black for durability and a high quality finish.

Supplied with an licence plate light.

Compatible with our R&G Micro indicators (RG370/RG371) and other indicators with an 8mm threaded stork, or the OEM indicators.

R&G Radiator Guards are available in black to fit the Suzuki SV650 (K5 onwards '05-).

Made from pressed aluminium and feature a neat, seamless frame (where applicable). They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris.
No permanent modifications need to be made to the bike.

Available in Black finish only.

Available in a 16"x 12" sheet, this R&G Titanium universal mesh is both lightweight and super strong, thanks to its real Titanium (ASTM B265 Grade 1) mesh construction.

Made from the same high quality mesh found on in our Titanium radiator and oil cooler guards, it improves the looks of your bike and help to protect your expensive and vulnerable radiator and other components from flying road debris.

No permanent modifications need to be made to the bike.

Supplied with...

Left hand side Generator cover for the Suzuki SV650 K3-K8 (2003-2008) & DL650 04-11.

Made in the U.K.

The covers simply bolt on over the original engine casing. So no messing with glue or removing anything. Slimline for maximum ground clearance, ultra lightweight, matt finish and protecting one of the most vulnerable parts of the machine. These could save you £'s in the event of an accident ...Ever seen the prices of a new engine casing or the cost of removing debris from you...

Right hand side Clutch cover for the Suzuki SV650 K3-K8 (2003-2008) & DL650 04-11.

Made in the U.K.

The covers simply bolt on over the original engine casing. So no messing with glue or removing anything. Slimline for maximum ground clearance, ultra lightweight, matt finish and protecting one of the most vulnerable parts of the machine. These could save you £'s in the event of an accident ...Ever seen the prices of a new engine casing or the cost of removing debris from your ...

Suitable for the Suzuki SV650 K3-K8 (2003-2008) & DL650 '04-'11


Our industry-leading Engine Case Covers are now available in kit form containing all the covers R&G offer for your bike in one go. Developed on track and brought to the road, R&G Engine Case Covers bring BSB and Moto America race series-approved levels of engine protection to your bike for complete peace of mind.

Made in the U.K.

Extensively used around the world by thousands of road riders, track day...

Protect your bars with our great little bar end sliders/protectors. Suitable for Renthal bars, LSL bars, Ducati 848 '08- / Ducati Diavel (2011-), Monster 1200 & S '14-, KTM RC125/200 '14-

Please Note, if fitting to a bike with closed ended grips, Modification will be required to install these bar ends.

These bar end protectors are suitable for the Suzuki SV650, SV1000, GSXF600 (produced from 1998 onwards), GSX750 FW (produced from 1998 onwards) & the GSX-R600/750 SRAD.

These Bar End Sliders are suitable for Gilles and Driven, clip ons (Plain) Bars.

These Bar End Sliders are suitable for Gilles (Threaded) Vario and GP Light Bars.

Kaoko Throttle Stabilizer for the SUZUKI B-King, GSX1250FA (Bandit 1250 FA), GSX1250A (Bandit 1250A), GSX1250SA (Bandit 1250SA), GSX1200, GSX650(S/N), GSX600(S/N), GSX650A (Bandit 650A), GSX650SA (Bandit 650SA), GSX650F, GSX650FA, GSR600A, GSR750, GSR650, GSX-R600, GSX-R750, GSX-R1000, SV650, TL1000(S/R), Gladius 650, YAMAHA V-Max 1200 (1985-2007), GSR 500 (Gladius 500), GSF1250 (2015-), GSX-S750F (2015-).

Awarded RiDE magazine Best buy award status.

R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.

Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and scooters). In only 2 minutes the grips heat up to 35°C (95°F) and on those r...

R&G Premium Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.

All new Premium Features:
-Heat Setting Memory
-Auto Cut-Out
-Fully Waterproof
-New Grip Design

Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and...

Improve your vision, confidence and safety all year round while you ride!

This ground-breaking product enables you to WASH your visor while on the bike.

Unique wash/wipe action that’s incredibly easy to use: 1. Fill the tank with Visorcat wash (supplied). 2. Wash by moving Visorcat across your visor one way. 3. Wipe the residue away by moving Visorcat across your visor in the other direction. The result is 100% clear vision in all conditions. Keep the sponge clean by rinsing i...

Available in Black, White or Orange finishes. R&G Cotton Reels locate on the paddock stand mounting points on the rear swingarm, offering protection and functionality in one product. Protecting the swingarm and drive components - keeping them off the ground in case of a crash or drop, as well as working as paddock stand points for lifting the rear of the bike onto a paddock stand for tyre removal, chain adjusting/lubrication and bike cleaning!

Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.

Patent No: GB2459728

The Shocktube® is a high-impact, waterproof, vented tube, made from top quality, bonded 100% CR Neoprene™ which is double lined with stretch nylon on both sides.
Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.
The Shocktube® can be fitted to most motorcycles with either monoshock or twin shock systems quickly, without the need to remove the shock absorber!
It continually prote...

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Suitable for the Yoshimura R-77 exhaust.
...

This generic Oval Exhaust Protector (Can Cover) is available for both left and right cans/exhausts.
Made in the U.K.

This Round Exhaust Protector (Can Cover) will fit both left and right cans/exhausts. This protector is a similiar design to the oval supermoto exhaust protector but with a 100mm diameter.
Made in the U.K.

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Made in the U.K.

This Exhaust Hanger is suitable for Suzuki SV650 up to '02 models with a single exhaust system.

This Exhaust Hanger is suitable for Suzuki SV650 '03 onwards models with a single exhaust system.

Never forget your sidestand puck again!

Kickstand Shoes bolt onto the bottom of the sidestand, to enlarge the original’s footprint by up to 100%, significantly spreading the load placed upon it, to help prevent the stand ‘piercing’ the ground. Despite this enlargement, the Shoe does not affect ground clearance or interfere with the chain run during normal riding.

This particular model fits the Suzuki SV650 '03- & DL650 V-Strom '04- W/O Centre Stand.

Never forget your sidestand puck again!

Kickstand Shoes bolt onto the bottom of the sidestand, to enlarge the original’s footprint by up to 100%, significantly spreading the load placed upon it, to help prevent the stand ‘piercing’ the ground. Despite this enlargement, the Shoe does not affect ground clearance or interfere with the chain run during normal riding.

This particular model fits the Suzuki 650 V-Strom '04-'12 and Suzuki SV650 '03-.

R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors.

In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0002 (see related products below) - in some cases more than one resister must be used inline.

Supplied as a pair

The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators for all Suzukis of model year 2001 onwards.

If the machine is from around the 2000-2002 period, please check before ordering, in case you need one of our other relays.

The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators.

Please check the existing Indicator Relay for the number of pins on your connector before ordering - if you are still unsure please ask your local dealer.

When using micro indicators, we recommend installing a set of R&G Indicator Adapters, which fill in gaps left by the removal of the original indicators.

These Indicator Adapters (IAS0006BK) come as a set of 4 pieces to suit Suzuki SV650 '03-, SV1000, GSXR600/750'96-'00 and can be used on both front and rear indicator mounting points.

All our indicators adapters are designed to be used in conjunction with R&G Micro Indicators with 8mm threads (code RG370: bulb type, code RG371...

R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of our iconic Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs, they come with clear lenses and illuminate on the side for additional visibility.

Available in two colour options: Black or Silver.

Can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors. ...

Are your micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you will find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.

** Supplied as a pair **


These resistors are for the R&G Bulb Indicators. If you have R&G LED indicators, please use RGR0002

Are your led micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you may find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.Note: We highly recommend buying this product when purchasing LED micro / mini indicators in order to save any disappointment when fitting.

NO wire cutting or soldering is required, these resistors fit inline.

** Supplied as a pair ** <...

R&G Racing's new, road-racing inspired toe guard has been developed in conjunction with roads hero Ryan Farquhar. Made from lightweight, high-density polyethylene, it features slots for improved positioning and a longer-than-usual kickback, in order to ensure adequate coverage of the sprocket in cases of running a long wheelbase - a typical feature of road racing.

These toe/chain guards are made from ABS Plastic. They look good, can be fitted in less than five minutes and are available in black or carbon look.

These toe/chain guards are made from Aluminium and have a Silver Finish. They are suitable for bikes with Dual Swingarms.

These toe/chain guards are made from Aluminium and have a Black Finish. They are suitable for bikes with Dual Swingarms.

This R&G Fender Extender is compatible with the Suzuki SV650 '03-, SV1000 '03-'08 models.

R&G Fender Extenders offer additional protection to front-mounted coolers, downpipes and fairing panels from debris, road grit, mud and water kicked up by the front wheel. Attaching to the motorcycle's front mud guard / fender via included adhesive strips and push rivets, installation takes only minutes.

This R&G Fender Extender is compatible with the Suzuki SV650 '99-'02 models.

R&G Fender Extenders offer additional protection to front-mounted coolers, downpipes and fairing panels from debris, road grit, mud and water kicked up by the front wheel. Attaching to the motorcycle's front mud guard / fender via included adhesive strips and push rivets, installation takes only minutes.

R&G Chain Cleaner quickly removes all containments from your chain. Our formula breaks down even the toughest grime for easy,  stress-free cleaning. For added cleaning power, consider using a brush to agitate contaminants before rinsing. 

R&G Motorcycle Degreaser effectively removes built-up grime from your machine. Safe to use on metal, plastic and rubber, our specialised formula will cut through even the toughest grime, leaving a clean, 'like-new' finish. For added cleaning power, consider using a brush to agitate contaminants before rinsing. 

R&G Disk Brake Cleaner can improve overall braking performance while prolonging the life of you brake discs and pads. Our formula is specially designed to remove brake dust, oil and any other contaminants that may affect braking performance. 

R&G Silicone Shine leaves your machine looking as good as it did right from the factory. Our formula guarantees a deep, grime resistant shine. 

R&G Helmet Fresh completely eradicates all odour from inside your helmet, leaving a fresh 'new helmet scent' every time! Our fast-drying formula will leave your helmet fresh and bacteria-free for those long rides. R&G Helmet Fresh is suitable for use on all fabrics. Why not try it on your gloves or clothing? 

R&G Nano Bike Wash effortlessly breaks down and removes all dirt, grime and contaminants that may be on your machine after the hardest rides. Our specially-created formula biodegradable formula makes cleaning your machine a pleasure and leaves it looking its best!