Shop By BikeSetting the standard in crash protection and bolt-on motorcycle accessories.


You're viewing All Products for Suzuki - DL1000 V-Strom Showing 1-50 of 158 results


RSS

Titanium Sprocket Nuts M10X1.25 (5-piece set)RGN01

This 5-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go through a PVD (physical vapour deposition) treatment, ensuring longevity and corrosion resistance.

• Only use Manufacturer torque settings, between 33 - 45nm.
• Kits are offered as bike-specific fitments. If you have a variation of a standard model you may require an alternative kit. ...

£30.83ex. VAT
Full Details
- Options Available -

R&G Stainless Steel Bar Ends for Suzuki DL650/DL1000 models & DL 1000XT V-STROM '17-.BE0133SS

Our all-new Stainless Steel Bar Ends have been specially developed and shaped for your bike - slightly heavier than the original bar ends, for less vibration.

The stainless steel finish with lasered R&G logo gives you the ultimate corrosion protection, whilst looking great and helping to protect those expensive levers and clip-ons from damage in the event of a drop or crash.

Designed for the Suzuki: Bandit 600, Bandit 650, Bandit 1200, Bandit 1250, Bandit 1250GT (Faired) '08, D...

£37.49ex. VAT
Full Details Add to Basket

Crash Protectors - Aero Style for Suzuki DL1000 V-Strom '14-'19, DL 1000XT V-STROM '17-'19, DL 1050 & 1050XT '20-CP0369BL

Our industry leading crash protectors are now available for the Suzuki DL1000 V-Strom '14-'19, DL 1000XT V-STROM '17-'19, DL 1050 & 1050XT '20-. Installing into existing engine mounts with a spanning block. they offer essential protection to the bike frame, engine and radiator keeping them raised up and away from the tarmac in the event of a crash or drop.

This kit is the non-drill option and as such requires NO modification to install.

R&G Aero Bobbins from R&G - the market...

£154.16ex. VAT
Full Details Add to Basket

Crash Protectors - Classic StyleCP0141BL

These crash protectors are suitable for the Kawasaki KLV1000 and the Suzuki DL1000 V-Strom up to '05.

£86.66ex. VAT
Full Details Add to Basket

Crash Protectors - Classic StyleCP0187BL

These crash protectors are suitable for the Suzuki DL1000 V-Strom '06-'13.


Available only in Black, they offer essential protection to the motorcycles engine and frame keeping them off the ground in the event of a crash or drop.

£103.33ex. VAT
Full Details Add to Basket

Licence Plate Extension/Adapter KitLPK0003BK

Universal Licence plate adapters to suit different number plates hole widths, once installed enable a certain amount of flexibility when fitting the a number plate, replacing the need to redrill your number plate.

Available in a one size fits all.

Supplied in pairs.

NO TAIL TIDY BRACKET IS SUPPLIED WITH THIS KIT

£6.24ex. VAT
Full Details Add to Basket

Radiator Guards for Suzuki DL1000 V-Strom '14- & DL 1000XT V-STROM '17-.RAD0173BK, RAD0173TI

Available in black and titanium finish to fit the Suzuki DL1000 V-Strom '14- model. They are made from pressed aluminium and feature a neat, seamless frame (where applicable).  They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris.

Specially designed to fit onto the Suzuki DL1000 V-Strom '14- & DL 1000XT V-STROM '17-. Radiator (RAD0173).

No permanent modifications need to be made to the bike.

£55.83ex. VAT
Full Details
- Options Available -

Radiator Guards for Suzuki V-Strom 1000 (upto 2013)RAD0156BK, RAD0156TI

This R&G Radiator Guard is available in black or titanium colour finishes to fit the Suzuki V-Strom 1000 protecting the radiator guard from damage from road debris.

Made from pressed aluminium and feature a neat, seamless frame (where applicable). They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris.
No permanent modifications need to be made to the bike.

£45.83ex. VAT
Full Details
- Options Available -

Stainless Steel Radiator Guard for Suzuki DL1000 V-Strom '14- & DL 1000XT V-STROM '17-.SRG0030SS

The R&G Stainless Steel Radiator Guard series is a more rugged version of our existing aluminium offering and are aimed particularly for Adventure and Touring bikes.

Constructed from 1mm stainless steel sheet allows the guard to be incredibly strong and impervious to rust – perfect for bikes and riders who may tackle demanding terrains and conditions.

The laser-cut grills are designed for maximum airflow to the radiator so that cooling isn't compromised; the Radiator Guard is...

£65.83ex. VAT
Full Details Add to Basket

Stainless Steel Radiator Guard for Suzuki V-Strom 1000SRG0016SS

New for 2013. The R&G Stainless Steel Radiator Guard series is a more rugged version of our existing aluminium offering and are aimed particularly for Adventure bikes.

Constructed from 1mm stainless steel sheet allows the guard to be incredibly strong and impervious to rust – perfect for bikes and riders who may tackle demanding terrains and conditions.

The laser-cut grills are designed for maximum airflow to the radiator so that cooling isn't compromised; the Radiator Guard ...

£65.83ex. VAT
Full Details Add to Basket

Titanium Radiator Guard Universal Mesh (16inches x 12inches)RADUMRACINGTI

Available in a 16"x 12" sheet, this R&G Titanium universal mesh is both lightweight and super strong, thanks to its real Titanium (ASTM B265 Grade 1) mesh construction.

Made from the same high quality mesh found on in our Titanium radiator and oil cooler guards, it improves the looks of your bike and help to protect your expensive and vulnerable radiator and other components from flying road debris.

No permanent modifications need to be made to the bike.

Supplied with...

£57.49ex. VAT
Full Details Add to Basket

Adventure Bars for Suzuki DL1000 V-Strom '14- & DL 1000XT V-STROM '17-AB0016BK

Dropping your cherished bike can be an expensive exercise. R&G Adventure Bars offer the rider peace of mind. R&G Adventure Bars provide essential crash protection for your motorcycle.

All R&G crash protection solutions are designed to be bike specific, therefore ensuring the best fit to your motorcycle without the need to modify.

All R&G products come supplied with comprehensive fitting instructions and with all hardware required making for an easy installation.

This ...

£174.16ex. VAT
Full Details Add to Basket

Engine Case Covers for Suzuki DL1000 V-Strom '14- & DL 1000XT V-STROM '17-ECC0174BK

This Engine Case Cover (Left Hand Side) is suitable for the Suzuki DL1000 V-Strom '14- & DL 1000XT V-STROM '17- protecting the LHS engine casing from damage in the event of a crash or drop.

Made in the U.K.

These exciting new Engine Case Covers have been developed in collaboration with selected race teams and crash tested within the R&G Racing Suzuki GSX-R Trophy. Crafted from 4mm polypropylene for strength, durability and good looks, they complement our crash protectors perfec...

£58.33ex. VAT
Full Details Add to Basket

Engine Case Cover (RHS) for Suzuki DL1000 V-Strom '14- & DL 1000XT V-STROM '17-.ECC0175BK

This Engine Case Cover (Right Hand Side) is suitable for the Suzuki DL1000 V-Strom '14- & DL 1000XT V-STROM '17-. protecting the RHS engine casing from damage in the event of a crash or drop.

Made in the U.K.

These exciting new Engine Case Covers have been developed in collaboration with selected race teams and crash tested within the R&G Racing Suzuki GSX-R Trophy. Crafted from 4mm polypropylene for strength, durability and good looks, they complement our crash protectors perf...

£58.33ex. VAT
Full Details Add to Basket

Engine Case Cover Kit (2pc) for Suzuki DL1000 V-Strom '14-KEC0071BK

Suitable for the Suzuki DL1000 V-Strom '14-

Made in the U.K.

Our industry-leading Engine Case Covers are now available in kit form containing all the covers R&G offer for your bike in one go. Developed on track and brought to the road, R&G Engine Case Covers bring BSB and Moto America race series-approved levels of engine protection to your bike for complete peace of mind.

Extensively used around the world by thousands of road riders, track day enthusiasts, the Califor...

£107.49ex. VAT
Full Details Add to Basket

Bar End Sliders for Renthal, LSL Bars, Ducati 848/Diavel, Monster 1200 & S '14-, KTM RC125/200 '14-BE0023BK

Protect your bars with our great little bar end sliders/protectors. Suitable for Renthal bars, LSL bars, Ducati 848 '08- / Ducati Diavel (2011-), Monster 1200 & S '14-, KTM RC125/200 '14-

Please Note, if fitting to a bike with closed ended grips, Modification will be required to install these bar ends.

£24.99ex. VAT
Full Details Add to Basket

Bar End Sliders for Suzuki DL650/DL1000 models, DL 1000XT V-STROM '17- & V-Strom 1050XT '20-.BE0017BK

These bar ends are suitable for a range of Suzuki models. Click 'more info' to view more specific details.

£24.99ex. VAT
Full Details Add to Basket

Bar End Sliders for Gilles and Driven clip ons (Plain) BarsBE0029BK

These Bar End Sliders are suitable for Gilles and Driven, clip ons (Plain) Bars.

£24.99ex. VAT
Full Details Add to Basket

Bar End Sliders for Gilles (Threaded) Vario and GP Light BarsBE0030BK

These Bar End Sliders are suitable for Gilles (Threaded) Vario and GP Light Bars.

£24.99ex. VAT
Full Details Add to Basket

Kaoko Throttle Stabilizer for Various bikes with Barkbusters HandguardsKA-KBB200REV1

Kaoko Throttle Stabilizer for Honda VFR1200X/XD (2012-) & NC700X (2012-) with Barkbusters BHG46.2NP handguards, XL1000V Varadero and XL600V / XL650V / XL700V Transalp with Barkbusters BHG31 or BHG46.2 hand guards; for SUZUKI DL1000 (-2011) and DL650 (-2011) V-Strom with Barkbusters BHG18 or BHG46.2 handguards (either with Barkbusters VPS or Storm plastics); for SUZUKI DL1000 (2012-) and DL650 (2012-) V-Strom with Barkbusters BHG46.2NP handguards (either with Barkbusters VPA or Storm plastics).

£89.99ex. VAT
Full Details Add to Basket

Kaoko Throttle Stabilizer for the Suzuki DL650 V-Strom , DL1000 V-StromKA-VS1000UWPT

Kaoko Throttle Stabilizer for the Suzuki DL650 V-Strom (all year models) with OEM handguards and with OEM heated grips, DL1000 V-Strom (all year models) with or without OEM handguards and with OEM heated grips. For use with Pro-Taper handle bars, or other aftermarkets aluminium handle bars with 14mm ID.

£89.16ex. VAT
Full Details Add to Basket

Kaoko Throttle Stabilizer for the Suzuki DL650 V-Strom '17- , DL1000 V-Strom & DL 1000XT V-STROM '17-'19 & V-Strom 1050 & 1050XT '20-.KA-VS1000UW-S

Kaoko Throttle Stabilizer for the Suzuki DL650 V-Strom '17- , DL1000 V-Strom & DL 1000XT V-STROM '17-'19 & V-Strom 1050 & 1050XT '20- with OEM handguards and with / without OEM heated grips, DL1000 V-Strom with or without OEM handguards and with / without OEM heated grips (All year models).

£85.83ex. VAT
Full Details Add to Basket

Motorcycle Heated Grips (for 22mm / 7/8-inch handlebars/ clipons)HG000122C

Awarded RiDE magazine Best buy award status.

R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.

Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and scooters). In only 2 minutes the grips heat up to 35°C (95°F) and on those r...

£34.58ex. VAT
Full Details Add to Basket

Premium Motorcycle Heated Grips (for 22mm / 7/8-inch handlebars/ clipons)HGMCPREM

based on 1 review

R&G Premium Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.

All new Premium Features:
-Heat Setting Memory
-Auto Cut-Out
-Fully Waterproof
-New Grip Design

Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and...

£45.83ex. VAT
Full Details Add to Basket

Heated Grip GlueGG0001

Eliminate that annoying spinning grip by getting a tube of grip glue. Holds grips firmly in place. Helps to reduce arm pump caused by trying to hold spinning grips in place.


Ideally suited to be used when installed R&G Heated Grips.

£4.25ex. VAT
Full Details Add to Basket

Visorcat Wash/ Wipe System with sponge and 50ml bottle VC001

Improve your vision, confidence and safety all year round while you ride!

This ground-breaking product enables you to WASH your visor while on the bike.

Unique wash/wipe action that’s incredibly easy to use: 1. Fill the tank with Visorcat wash (supplied). 2. Wash by moving Visorcat across your visor one way. 3. Wipe the residue away by moving Visorcat across your visor in the other direction. The result is 100% clear vision in all conditions. Keep the sponge clean by rinsing i...

£30.82ex. VAT
Full Details Add to Basket

R&G Cotton ReelsCR0001BK, CR0001OR, CR0001WH

Available in Black, White or Orange finishes. R&G Cotton Reels locate on the paddock stand mounting points on the rear swingarm, offering protection and functionality in one product. Protecting the swingarm and drive components - keeping them off the ground in case of a crash or drop, as well as working as paddock stand points for lifting the rear of the bike onto a paddock stand for tyre removal, chain adjusting/lubrication and bike cleaning!

£18.33ex. VAT
Full Details
- Options Available -

Fork Protectors for Suzuki DL1000 V-Strom '14-'19, DL 1000XT V-STROM '17-'19, V-Strom 1050 & 1050XT '20-.FP0156BK

These fork protectors are suitable for the Suzuki DL1000 V-Strom '14-'19, DL 1000XT V-STROM '17-'19, V-Strom 1050 & 1050XT '20-.

Easy to install, they help to eliminate damage to the front forks, fork bottoms and brake calipers during a crash or drop.

£29.99ex. VAT
Full Details Add to Basket

Fork ProtectorsFP0023BK

These fork protectors are suitable for the Suzuki DL 650 (upto 2011) & 1000 V Strom and help to eliminate damage to the front forks during a drop.

£29.99ex. VAT
Full Details Add to Basket

Swingarm Protectors for BMW S1000RR/XR, F750GS/F850GS '18-, HP4 & F900 R/XR '20-, SUZUKI GSXR 600 K6- / 750 K6- / 1000 K5-, Yamaha MT-10 '16- & SP '17- & Niken '18-SP0057BK

These swingarm protectors are suitable for the BMW S1000RR, BMW S1000RX, BMW HP4, BMW F750GS/F850GS '18-, F900 R/XR '20-, Suzuki GSXR 600 K6-, 750 K6-, 1000 K5-, Yamaha MT-10 '16- & SP '17-, Suzuki DL1000 V-Strom '14- & Yamaha Niken '18- (with the larger internal spindle diameters of 16mm and 24mm). They fit to the rear spindle and provide added protection to the swingarm area.

£34.99ex. VAT
Full Details Add to Basket

R&G Tank Traction Grip for Suzuki V-STROM 1000 '02-'14 & DL 1000XT V-STROM '17-.EZRG720BL, EZRG720CL

These R&G Tank Traction Grips have been specially designed for the Suzuki V-STROM 1000 '02-'14 & DL 1000XT V-STROM '17-.

R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while c...

£26.66ex. VAT
Full Details
- Options Available -

Shocktube ®SHOCK9BK

Completely enclosing the motorcycles rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.

Patent No: GB2459728

£22.49ex. VAT
Full Details Add to Basket

Measure your own Shocktube ®Measure Your Own

The Shocktube® is a high-impact, waterproof, vented tube, made from top quality, bonded 100% CR Neoprene™ which is double lined with stretch nylon on both sides.
Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.
The Shocktube® can be fitted to most motorcycles with either monoshock or twin shock systems quickly, without the need to remove the shock absorber!
It continually prote...

£21.24ex. VAT
Full Details
- Dont forget to include your shock measurements in the email! -

Exhaust Protector (Yoshimura R-77)EP0011BK

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Suitable for the Yoshimura R-77 exhaust.
...

£39.16ex. VAT
Full Details Add to Basket

Oval style Exhaust Protector (Can Cover)EP0005BK

This Oval Style Exhaust Protector (Can Cover) will fit both left and right cans/exhausts.

Made in the U.K.

£27.49ex. VAT
Full Details Add to Basket

Exhaust Protector 4.5" to 5.5" (Can Cover)EP0006BK

This Round Exhaust Protector (Can Cover) will fit both left and right cans/exhausts. This protector is a similiar design to the oval supermoto exhaust protector but with a 100mm diameter.
Made in the U.K.

£27.49ex. VAT
Full Details Add to Basket

Exhaust Protector (Scorpion Serket Exhaust)EP0012BK

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Made in the U.K.

£39.16ex. VAT
Full Details Add to Basket

Exhaust ProtectorEP0014BK

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Made in the U.K.

£39.16ex. VAT
Full Details Add to Basket

Kickstand Shoe for Suzuki DL1000 V-Strom '14-'17 & DL 1000XT V-STROM '17-.PKS0051SI

Never forget your sidestand puck again!

Kickstand Shoes bolt onto the bottom of the sidestand, to enlarge the original’s footprint by up to 100%, significantly spreading the load placed upon it, to help prevent the stand ‘piercing’ the ground. Despite this enlargement, the Shoe does not affect ground clearance or interfere with the chain run during normal riding.

This particular model fits the Suzuki DL1000 V-Strom '14-'17 & DL 1000XT V-STROM '17-.

£31.66ex. VAT
Full Details Add to Basket

R&G Micro LED Indicators RG374BK

R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors.

In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0002 (see related products below) - in some cases more than one resister must be used inline.

Supplied as a pair

£29.16ex. VAT
Full Details Add to Basket

R&G LED Flasher Relay : 7-pin, for all Suzukis 2001 onwardsRGRELAY004

The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators for all Suzukis of model year 2001 onwards.

If the machine is from around the 2000-2002 period, please check before ordering, in case you need one of our other relays.

£28.33ex. VAT
Full Details Add to Basket

Front Indicator Adapter Kit for the Suzuki DL1000 V-Strom '14- & DL 1000XT V-STROM '17-and GSX-S1000FA (Faired bike) modelsFAP0008BK

These indicator adapters are made to suit the Suzuki DL1000 V-Strom '14- & DL 1000XT V-STROM '17- models and Suzuki GSX-S1000 (Faired bike) '15- models and allow the use of R&G micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.

£9.99ex. VAT
Full Details Add to Basket

Micro Indicators - LED Type - Aero StyleRG372BK, RG372SI

R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of our iconic Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs, they come with clear lenses and illuminate on the side for additional visibility.

Available in two colour options: Black or Silver.

Can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors. ...

£41.66ex. VAT
Full Details
- Options Available -

Micro Indicators - Resistors for Bulb indicatorsRGR0001

Are your micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you will find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.

** Supplied as a pair **


These resistors are for the R&G Bulb Indicators. If you have R&G LED indicators, please use RGR0002

£2.91ex. VAT
Full Details Add to Basket

Micro LED Indicators - ResistorsRGR0002

Are your led micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you may find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.Note: We highly recommend buying this product when purchasing LED micro / mini indicators in order to save any disappointment when fitting.

NO wire cutting or soldering is required, these resistors fit inline.

** Supplied as a pair ** <...

£2.91ex. VAT
Full Details Add to Basket

Toe Chain Guards - Road Racing Toe GuardTG0005BK

R&G Racing's new, road-racing inspired toe guard has been developed in conjunction with roads hero Ryan Farquhar. Made from lightweight, high-density polyethylene, it features slots for improved positioning and a longer-than-usual kickback, in order to ensure adequate coverage of the sprocket in cases of running a long wheelbase - a typical feature of road racing.

£31.66ex. VAT
Full Details Add to Basket

Toe Chain Guards - ABS Shark's FinTG0001BK, TG0001CL

These toe/chain guards are made from ABS Plastic. They look good, can be fitted in less than five minutes and are available in black or carbon look.

£23.33ex. VAT
Full Details
- Options Available -

Toe Chain Guards - Aluminium - SilverTG0002A2

These toe/chain guards are made from Aluminium and have a Silver Finish. They are suitable for bikes with Dual Swingarms.

£27.49ex. VAT
Full Details Add to Basket

Toe Chain Guards - Aluminium - BlackTG0002B2

These toe/chain guards are made from Aluminium and have a Black Finish. They are suitable for bikes with Dual Swingarms.

£27.49ex. VAT
Full Details Add to Basket

Top Yoke CapYTI0004BK

This Top Yoke Cap is suitable for the Suzuki DL1000 V-Strom '14-, Suzuki GSX-S 1000 '15-, Suzuki GSX-S 1000FA '15-, Yamaha YZF-R1 '15-, Honda Africa Twin '16-, Africa Twin Adventure Sports '18- and CRF1100L Africa Twin Standard Model '20-.

A "must have" to give that Stem Nut of yours a finished look. Covering the stock Yoke Stem Nut and securing in place thanks to its ribbed design ensures a tight fit that won't fall out or move.

Finished in Black.

Sold as a single.

£10.83ex. VAT
Full Details Add to Basket

showing page 1 of 4
 
© 2021 Racing Technique Ltd. (t/a R&G)
Our Terms of use have changed

Please review and agree to continue to use the R&G website.

AGREE AND CONTINUE