Shop By BikeSetting the standard in crash protection and bolt-on motorcycle accessories.


You're viewing All Products for Suzuki - Bandit 650 Showing 1-50 of 139 results


RSS

Titanium Sprocket Nuts M10X1.25 (5-piece set)RGN01

This 5-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go through a PVD (physical vapour deposition) treatment, ensuring longevity and corrosion resistance.

• Only use Manufacturer torque settings, between 33 - 45nm.
• Kits are offered as bike-specific fitments. If you have a variation of a standard model you may require an alternative kit. ...

£30.83ex. VAT
Full Details
- Options Available -

R&G Stainless Steel Bar Ends for Suzuki DL650/DL1000 models & DL 1000XT V-STROM '17-.BE0133SS

Our all-new Stainless Steel Bar Ends have been specially developed and shaped for your bike - slightly heavier than the original bar ends, for less vibration.

The stainless steel finish with lasered R&G logo gives you the ultimate corrosion protection, whilst looking great and helping to protect those expensive levers and clip-ons from damage in the event of a drop or crash.

Designed for the Suzuki: Bandit 600, Bandit 650, Bandit 1200, Bandit 1250, Bandit 1250GT (Faired) '08, D...

£37.49ex. VAT
Full Details Add to Basket

Crash Protectors - Classic Style for Suzuki Bandit 650 '07-'10 and Suzuki Bandit 1250 '07- modelsCP0206BL

These crash protectors are suitable for the Suzuki Bandit 650 '07-'10 (water-cooled) and Suzuki Bandit 1250 '07- models.

£168.33ex. VAT
Full Details Add to Basket

Crash Protectors - Classic Style for Suzuki Bandit 650 '06CP0148BL

These crash protectors are suitable for the Suzuki Bandit 650 '06.

£112.49ex. VAT
Full Details Add to Basket

Tail Tidy for Suzuki Bandit 650 '10- and Bandit 1250 '10-LP0109BK

Tidy up your bike's rear end with this R&G Tail Tidy/Licence Plate Holder for the Suzuki Bandit 650 (2010 onward) and Suzuki Bandit 1250 (2010-).

£61.66ex. VAT
Full Details Add to Basket

Tail Tidy for Suzuki Bandit 650/1250 modelsLP0112BK

Tidy up your bike's rear end with this R&G Tail Tidy/Licence Plate Holder for the Suzuki GSF1250 Bandit, GSX1250FA, GSX650F '08- & GSF650 Bandit '07-'09.

This tail tidy comes supplied with an replacement ABS injection moulded undertray and licence plate bracket transforming and smartening up the backend of the bike.

This product is fully compatible with either the OEM indictators or our own R&G Micro Indictators (#RG370) - available below.

£96.66ex. VAT
Full Details Add to Basket

Licence Plate Extension/Adapter KitLPK0003BK

Universal Licence plate adapters to suit different number plates hole widths, once installed enable a certain amount of flexibility when fitting the a number plate, replacing the need to redrill your number plate.

Available in a one size fits all.

Supplied in pairs.

NO TAIL TIDY BRACKET IS SUPPLIED WITH THIS KIT

£6.24ex. VAT
Full Details Add to Basket

Radiator Guards for Suzuki Bandit 650 '10-RAD0110BK

R&G Radiator Guards are made from aluminium, improve looks and protect your expensive and vulnerable radiator from flying debris.This radiator guard is suitable for Suzuki Bandit 650 (2010 onwards)

£45.83ex. VAT
Full Details Add to Basket

Titanium Radiator Guard Universal Mesh (16inches x 12inches)RADUMRACINGTI

Available in a 16"x 12" sheet, this R&G Titanium universal mesh is both lightweight and super strong, thanks to its real Titanium (ASTM B265 Grade 1) mesh construction.

Made from the same high quality mesh found on in our Titanium radiator and oil cooler guards, it improves the looks of your bike and help to protect your expensive and vulnerable radiator and other components from flying road debris.

No permanent modifications need to be made to the bike.

Supplied with...

£57.49ex. VAT
Full Details Add to Basket

Branded Radiator Guard For Suzuki Bandit 650 '10-BRG0002SS

Our Branded Radiator Guards have been specially designed with bike enthusiasts in mind, each kit containing a unique design made to complement your bike. These exciting new Branded Radiator Guards are more than just visually outstanding, their stainless steel construction allows the guard to be incredibly strong and impervious to rust. Each laser-cut guard is crafted with a specific bike series in mind, boasting a distinctive design, while still allowing maximum airflow to the radiator so that c...

£54.99ex. VAT
Full Details Add to Basket

Engine Case CoversECC0010BK

Suzuki GSF 650/1250 Bandit '07-'11 models onwards, GSX650F 08 onwards and GSX 1250 FA 2010 models - Left Hand Side crank case cover.

Made in the U.K.

Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Seri...

£66.66ex. VAT
Full Details Add to Basket

Engine Case CoversECC0011BK

Suzuki GSF 650/1250 Bandit '07-'11 models, GSX650F 08 onwards and GSX 1250 FA Models - Right Hand Side crank case cover.

Made in the U.K.

Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Series for use i...

£58.33ex. VAT
Full Details Add to Basket

Engine Case CoversECC0019BK

Suzuki GSF 650/1250 Bandit '07-'11 models onwards, GSX650F 08 onwards and GSX 1250 FA - Right Hand Side idle gear cover.

Made in the U.K.

Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Series for use i...

£34.99ex. VAT
Full Details Add to Basket

Engine Case Cover Kit (3pc) for Suzuki Bandit 650, Bandit 1250GT and GSX-1250 FA modelsKEC0006BK

Suitable for the Suzuki Bandit 650, Bandit 1250GT and GSX-1250 FA modelsOur industry-leading Engine Case Covers are now available in kit form containing all the covers R&G offer for your bike in one go. Developed on track and brought to the road, R&G Engine Case Covers bring BSB and Moto America race series-approved levels of engine protection to your bike for complete peace of mind.

Made in the U.K.

Extensively used around the world by thousands of road riders, track day enthu...

£143.33ex. VAT
Full Details Add to Basket

Bar End Sliders for Renthal, LSL Bars, Ducati 848/Diavel, Monster 1200 & S '14-, KTM RC125/200 '14-BE0023BK

Protect your bars with our great little bar end sliders/protectors. Suitable for Renthal bars, LSL bars, Ducati 848 '08- / Ducati Diavel (2011-), Monster 1200 & S '14-, KTM RC125/200 '14-

Please Note, if fitting to a bike with closed ended grips, Modification will be required to install these bar ends.

£24.99ex. VAT
Full Details Add to Basket

Bar End Sliders for Suzuki DL650/DL1000 models, DL 1000XT V-STROM '17- & V-Strom 1050XT '20-.BE0017BK

These bar ends are suitable for a range of Suzuki models. Click 'more info' to view more specific details.

£24.99ex. VAT
Full Details Add to Basket

Bar End Sliders for Gilles and Driven clip ons (Plain) BarsBE0029BK

These Bar End Sliders are suitable for Gilles and Driven, clip ons (Plain) Bars.

£24.99ex. VAT
Full Details Add to Basket

Bar End Sliders for Gilles (Threaded) Vario and GP Light BarsBE0030BK

These Bar End Sliders are suitable for Gilles (Threaded) Vario and GP Light Bars.

£24.99ex. VAT
Full Details Add to Basket

Motorcycle Heated Grips (for 22mm / 7/8-inch handlebars/ clipons)HG000122C

Awarded RiDE magazine Best buy award status.

R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.

Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and scooters). In only 2 minutes the grips heat up to 35°C (95°F) and on those r...

£34.58ex. VAT
Full Details Add to Basket

Premium Motorcycle Heated Grips (for 22mm / 7/8-inch handlebars/ clipons)HGMCPREM

based on 1 review

R&G Premium Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.

All new Premium Features:
-Heat Setting Memory
-Auto Cut-Out
-Fully Waterproof
-New Grip Design

Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and...

£45.83ex. VAT
Full Details Add to Basket

Visorcat Wash/ Wipe System with sponge and 50ml bottle VC001

Improve your vision, confidence and safety all year round while you ride!

This ground-breaking product enables you to WASH your visor while on the bike.

Unique wash/wipe action that’s incredibly easy to use: 1. Fill the tank with Visorcat wash (supplied). 2. Wash by moving Visorcat across your visor one way. 3. Wipe the residue away by moving Visorcat across your visor in the other direction. The result is 100% clear vision in all conditions. Keep the sponge clean by rinsing i...

£30.82ex. VAT
Full Details Add to Basket

Fork ProtectorsFP0071BK

These fork protectors are suitable for the Suzuki Bandit 650 '07- (water-cooled) models and the Suzuki GSX650F '08-.

£29.99ex. VAT
Full Details Add to Basket

R&G Tank Traction Grip for Suzuki Bandit 650 '07-EZRG711BL, EZRG711CL

These R&G Tank Traction Grips have been specially designed for the Suzuki Bandit 650 '07-.

R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking.

£23.33ex. VAT
Full Details
- Options Available -

Measure your own Shocktube ®Measure Your Own

The Shocktube® is a high-impact, waterproof, vented tube, made from top quality, bonded 100% CR Neoprene™ which is double lined with stretch nylon on both sides.
Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.
The Shocktube® can be fitted to most motorcycles with either monoshock or twin shock systems quickly, without the need to remove the shock absorber!
It continually prote...

£21.24ex. VAT
Full Details
- Dont forget to include your shock measurements in the email! -

Exhaust Protector (Yoshimura R-77)EP0011BK

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Suitable for the Yoshimura R-77 exhaust.
...

£39.16ex. VAT
Full Details Add to Basket

5.5"- 6.5" Round Exhaust Protector EP0009BK

This 5.5" - 6.5" Round Exhaust Protector (Can Cover) will fit both left and right cans/exhausts. This protector is suitable for round exhausts with a 5.5" - 6.5" diameter.
Made in the U.K.

£35.83ex. VAT
Full Details Add to Basket

Exhaust Protector (Scorpion Serket Exhaust)EP0012BK

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Made in the U.K.

£39.16ex. VAT
Full Details Add to Basket

Exhaust Hanger for Suzuki Bandit 600/650/1200EH0024SI

This Exhaust Hanger is suitable for Suzuki Bandit 600 '01-'04, 1200 '01-'05 & 650 '05 onwards models with a single exhaust system.

£42.49ex. VAT
Full Details Add to Basket

Kickstand Shoe for the Suzuki GSX1250FA '07-, Bandit 650/S '07-'12 and Bandit 1250 '07-PKS0014SI

Never forget your sidestand puck again!

Kickstand Shoes bolt onto the bottom of the sidestand, to enlarge the original’s footprint by up to 100%, significantly spreading the load placed upon it, to help prevent the stand ‘piercing’ the ground. Despite this enlargement, the Shoe does not affect ground clearance or interfere with the chain run during normal riding.

This particular model fits the Suzuki GSX1250FA '07-, Bandit 650/S '07-'12 and Bandit 1250 '07-.

£31.66ex. VAT
Full Details Add to Basket

R&G Micro LED Indicators RG374BK

R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors.

In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0002 (see related products below) - in some cases more than one resister must be used inline.

Supplied as a pair

£29.16ex. VAT
Full Details Add to Basket

R&G LED Flasher Relay : 7-pin, for all Suzukis 2001 onwardsRGRELAY004

The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators for all Suzukis of model year 2001 onwards.

If the machine is from around the 2000-2002 period, please check before ordering, in case you need one of our other relays.

£28.33ex. VAT
Full Details Add to Basket

Micro Indicators - LED Type - Aero StyleRG372BK, RG372SI

R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of our iconic Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs, they come with clear lenses and illuminate on the side for additional visibility.

Available in two colour options: Black or Silver.

Can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors. ...

£41.66ex. VAT
Full Details
- Options Available -

Micro Indicators - Resistors for Bulb indicatorsRGR0001

Are your micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you will find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.

** Supplied as a pair **


These resistors are for the R&G Bulb Indicators. If you have R&G LED indicators, please use RGR0002

£2.91ex. VAT
Full Details Add to Basket

Micro LED Indicators - ResistorsRGR0002

Are your led micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you may find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.Note: We highly recommend buying this product when purchasing LED micro / mini indicators in order to save any disappointment when fitting.

NO wire cutting or soldering is required, these resistors fit inline.

** Supplied as a pair ** <...

£2.91ex. VAT
Full Details Add to Basket

Toe Chain Guards - Road Racing Toe GuardTG0005BK

R&G Racing's new, road-racing inspired toe guard has been developed in conjunction with roads hero Ryan Farquhar. Made from lightweight, high-density polyethylene, it features slots for improved positioning and a longer-than-usual kickback, in order to ensure adequate coverage of the sprocket in cases of running a long wheelbase - a typical feature of road racing.

£31.66ex. VAT
Full Details Add to Basket

Toe Chain Guards - ABS Shark's FinTG0001BK, TG0001CL

These toe/chain guards are made from ABS Plastic. They look good, can be fitted in less than five minutes and are available in black or carbon look.

£23.33ex. VAT
Full Details
- Options Available -

Toe Chain Guards - Aluminium - SilverTG0002A2

These toe/chain guards are made from Aluminium and have a Silver Finish. They are suitable for bikes with Dual Swingarms.

£27.49ex. VAT
Full Details Add to Basket

Toe Chain Guards - Aluminium - BlackTG0002B2

These toe/chain guards are made from Aluminium and have a Black Finish. They are suitable for bikes with Dual Swingarms.

£27.49ex. VAT
Full Details Add to Basket

Fender Extender for Suzuki GSF650, GSX650, GSF1200 '06-, GSF1250, GSX1250FERG0221BK, FERG0221CL

This R&G Fender Extender is compatible with the Suzuki GSF650/S '05-'08, GSX650/S '08-'12, GSF1200/S '07-'10, GSF1250/S '07-'10, GSX1250FA '10-'14 models.

R&G Fender Extenders offer additional protection to front-mounted coolers, downpipes and fairing panels from debris, road grit, mud and water kicked up by the front wheel. Attaching to the motorcycle's front mud guard / fender via included adhesive strips and push rivets, installation takes only minutes.

£24.99ex. VAT
Full Details
- Options Available -

Fender Extender for Suzuki GSF650/S (Bandit 650) '09-'12FERG0222BK, FERG0222CL

This R&G Fender Extender is compatible with the Suzuki GSF650/S (Bandit 650) '09-'12 models.

R&G Fender Extenders offer additional protection to front-mounted coolers, downpipes and fairing panels from debris, road grit, mud and water kicked up by the front wheel. Attaching to the motorcycle's front mud guard / fender via included adhesive strips and push rivets, installation takes only minutes.

£24.99ex. VAT
Full Details
- Options Available -

R&G Gleam Chain Cleaner 500ml RGGLEAM10

R&G Chain Cleaner quickly removes all containments from your chain. Our formula breaks down even the toughest grime for easy,  stress-free cleaning. For added cleaning power, consider using a brush to agitate contaminants before rinsing. 

£6.66ex. VAT
Full Details Add to Basket

R&G Gleam Motorcycle Degreaser 500mlRGGLEAM11

R&G Motorcycle Degreaser effectively removes built-up grime from your machine. Safe to use on metal, plastic and rubber, our specialised formula will cut through even the toughest grime, leaving a clean, 'like-new' finish. For added cleaning power, consider using a brush to agitate contaminants before rinsing. 

£6.66ex. VAT
Full Details Add to Basket

R&G Gleam Disc Brake Cleaner 500mlRGGLEAM12

R&G Disk Brake Cleaner can improve overall braking performance while prolonging the life of you brake discs and pads. Our formula is specially designed to remove brake dust, oil and any other contaminants that may affect braking performance. 

£6.66ex. VAT
Full Details Add to Basket

R&G Gleam Silicone Shine 500mlRGGLEAM13

R&G Silicone Shine leaves your machine looking as good as it did right from the factory. Our formula guarantees a deep, grime resistant shine. 

£8.33ex. VAT
Full Details Add to Basket

R&G Gleam Helmet Fresh 150mlRGGLEAM14

R&G Helmet Fresh completely eradicates all odour from inside your helmet, leaving a fresh 'new helmet scent' every time! Our fast-drying formula will leave your helmet fresh and bacteria-free for those long rides. R&G Helmet Fresh is suitable for use on all fabrics. Why not try it on your gloves or clothing? 

£4.99ex. VAT
Full Details Add to Basket

R&G Gleam Nano Bike Wash 1LRGGEALM3A

R&G Nano Bike Wash effortlessly breaks down and removes all dirt, grime and contaminants that may be on your machine after the hardest rides. Our specially-created formula biodegradable formula makes cleaning your machine a pleasure and leaves it looking its best!

£6.66ex. VAT
Full Details Add to Basket

R&G Gleam Nano Bike Wash 5LRGGLEAM3B

R&G Nano Bike Wash effortlessly breaks down and removes all dirt, grime and contaminants that may be on your machine after the hardest rides. Our specially-created formula biodegradable formula makes cleaning your machine a pleasure and leaves it looking its best!

£15.83ex. VAT
Full Details Add to Basket

R&G Gleam Waterless Bike Wash 1LRGGLEAM4

R&G Waterlesss Bike Wash is the easiest way to remove light contaminants from your machine between major washes. Our special formula effortlessly cleans all surfaces - with no water necessary! It leaves a streak-free, non-sticky, high shine from just one application. 

£9.16ex. VAT
Full Details Add to Basket

R&G Gleam Anti-fog Solution 50mlRGGLEAM5

R&G Anti-fog Solution prevents your vision from being obscured while on the go! Our formula creates a super-thin, transparent nanolayer to prevent your visor, goggles and eyewear from fogging up. 

£5.83ex. VAT
Full Details Add to Basket

R&G Gleam Helmet & Visor Cleaner 50mlRGGLEAM6

R&G Helmet & Visor Cleaner quickly removes all contaminants from helmets, visors and eyewear, Our specially-created PH-neutral formula is safe to use on all helmets and is fully biodegradable. 

£4.16ex. VAT
Full Details Add to Basket

showing page 1 of 3
 
© 2021 Racing Technique Ltd. (t/a R&G)
Our Terms of use have changed

Please review and agree to continue to use the R&G website.

AGREE AND CONTINUE