Shop By BikeSetting the standard in crash protection and bolt-on motorcycle accessories.
You're viewing All Products for Royal Enfield - Continental GT 650
Showing 1-47 of 47 results
Radically tidy up the rear end of the Tail Tidy for Royal Enfield Interceptor 650 ’19- and Continental GT 650 ’19-.
R&G tail tidy unit is easy to fit and will radically transform the rear end of the bike, removing the expansive (and often ugly!) OEM licence plate holders - replacing them with a much sleeker looking unit.
The R&G Stainless Steel Oil Cooler Guard series is a more rugged version of our existing aluminium guard.
Constructed from 1mm stainless steel sheet allows the guard to be incredibly strong and impervious to rust – perfect for bikes and riders who may tackle demanding terrains and conditions.
The laser-cut grills are designed for maximum airflow to the Oil Cooler so that cooling isn't compromised; the Oil Cooler Guard is as good looking as it is purposeful.
This R&G O...
This R&G Oil Cooler Guard for the Royal Enfield Interceptor 650 ’19- and Continental GT 650 ’19- all models is available in either Black or Titanium (Silver) powder coat finishes for a long lasting durable finish. Made from aluminium mesh encased in an aluminium frame, the neat design adds to the looks of the bike as well as keeping the radiator/oil cooler well protected from stones and road debris kicked up by the wheel or by other road users.
Dropping your cherished bike can be an expensive exercise. R&G Adventure Bars offer the rider peace of mind. R&G Adventure Bars provide essential crash protection for your motorcycle.
All R&G crash protection solutions are designed to be bike specific, therefore ensuring the best fit to your motorcycle without the need to modify.
All R&G products come supplied with comprehensive fitting instructions and with all hardware required making for an easy installation.
This ...
R&G Bar End sliders have been specially designed and developed for the Royal Enfield Interceptor 650 ’19 and Continental GT 650 ’19- models.
Helping to protect expensive levers and clip-ons from damage in the event of a drop, crash or slide.
This Kaoko Throttle Stabilizer kit is designed to fit the Royal Enfield Interceptor 650 '19- and Continental GT 650 ’19-
These R&G Cotton Reels mount directly into the paddock stand mounting points on the rear swingarm and are suitable for the BMW S1000RR, S1000R, HP4 models, the Triumph Street Triple '13-, R / S / RS 765 '17-, Royal Enfield Interceptor 650 ’19- and Continental GT 650 ’19- models. Providing crash protection to the swingarm and swingarm components as well as allowing the ability to lift the motorcycle up on a paddock stand for chain cleaning/maintenance, motorcycle cleaning, tyre changes and much m...
Easy to install, they help to eliminate damage to the front forks, fork bottoms and brake callipers during a crash or drop.
These fork protectors are suitable for the Royal Enfield Interceptor 650 ’19- and Continental GT 650 ’19- model.
Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.
Patent No: GB2459728
Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.
A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.
Suitable for Exhausts upto 226mm circumference....
This R&G Headlight Shield is specially designed to fit Ducati Scrambler 1100 '18-, Royal Enfield Interceptor 650 ’19- & Continental GT 650 ’19- models.
R&G Headlight shields are engineered for protection and style. Protecting your expensive headlights from debris kicked up from the road, our headlight shields are easy to fit, with no modification needed to your bike and they are easily removed for cleaning. R&G Headlight Shields are made from clear acrylic and specially designed to fit...
R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.
If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors.
In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0002 (see related products below) - in some cases more than one resister must be used inline.
Supplied as a pair
These R&G Rear Indicator Adapters are made to suit the Royal Enfield Interceptor 650 ’19- & Continental GT 650 ’19- model and allow the use of R&G micro indicators (RG370/RG371/RG372) or other aftermarket (8mm) indicators as rear turn signals, getting rid of the often large OEM indicators and helping give your bike a more sporty and sleek look.
Please note: NO indicators included with this kit.
These R&G Indicator Adapters are made to suit the Royal Enfield Interceptor 650 ’19- and Continental GT 650 ’19- models and allow the use of our own micro indicators (RG370/RG371/RG372) as front indicators, getting rid of those large OEM indicators and helping give your bike a more sporty look.
Please note: NO indicators included with this kit.
The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators.
Please check the existing Indicator Relay for the number of pins on your connector before ordering - if you are still unsure please ask your local dealer.
These Mirror Risers are made from 6082 T6 Aluminium and are suitable for any bike with an M10x1.25 threaded mirror socket.
Suitable for the Ducati Hypermotard 821 '13-, Ducati Hyperstrada 821 '13-, Hypermotard 950 '19-, Royal Enfield Interceptor 650 ’19-, Zero DSR '19-, Zero FX '19- and Royal Enfield Continental GT 650 ’19- along with any bike with a M10x1.25 mirror mounting point.
Risers are perfect for increasing rearward visibility while riding. This extender raises the mi...
R&G Chain Cleaner quickly removes all containments from your chain. Our formula breaks down even the toughest grime for easy, stress-free cleaning. For added cleaning power, consider using a brush to agitate contaminants before rinsing.
R&G Motorcycle Degreaser effectively removes built-up grime from your machine. Safe to use on metal, plastic and rubber, our specialised formula will cut through even the toughest grime, leaving a clean, 'like-new' finish. For added cleaning power, consider using a brush to agitate contaminants before rinsing.
R&G Disk Brake Cleaner can improve overall braking performance while prolonging the life of you brake discs and pads. Our formula is specially designed to remove brake dust, oil and any other contaminants that may affect braking performance.
R&G Silicone Shine leaves your machine looking as good as it did right from the factory. Our formula guarantees a deep, grime resistant shine.
R&G Helmet Fresh completely eradicates all odour from inside your helmet, leaving a fresh 'new helmet scent' every time! Our fast-drying formula will leave your helmet fresh and bacteria-free for those long rides. R&G Helmet Fresh is suitable for use on all fabrics. Why not try it on your gloves or clothing?
R&G Nano Bike Wash effortlessly breaks down and removes all dirt, grime and contaminants that may be on your machine after the hardest rides. Our specially-created formula biodegradable formula makes cleaning your machine a pleasure and leaves it looking its best!
R&G Nano Bike Wash effortlessly breaks down and removes all dirt, grime and contaminants that may be on your machine after the hardest rides. Our specially-created formula biodegradable formula makes cleaning your machine a pleasure and leaves it looking its best!
R&G Waterlesss Bike Wash is the easiest way to remove light contaminants from your machine between major washes. Our special formula effortlessly cleans all surfaces - with no water necessary! It leaves a streak-free, non-sticky, high shine from just one application.
R&G Anti-fog Solution prevents your vision from being obscured while on the go! Our formula creates a super-thin, transparent nanolayer to prevent your visor, goggles and eyewear from fogging up.
R&G Helmet & Visor Cleaner quickly removes all contaminants from helmets, visors and eyewear, Our specially-created PH-neutral formula is safe to use on all helmets and is fully biodegradable.
R&G Everyday Chain Lube offers maximum protection for your chain over long distances, in all weathers. Our formula penetrates deep into the chain links, offering extreme lubrication with no fling. Suitable for both road and off-road use. for easy removal, after you ride, use R&G Nano Bike Wash and Chain Cleaner.
R&G Dry Chain Lube provides the ultimate protection for your chain in dry and dusty conditions. Our wax-based formula ensures maximum lubrication while not attracting dirt and grit for a clean ride. For easy removal after your ride, use R&G Nano Bike Wash and Chain Cleaner.
R&G Wet Chain Lube provides the ultimate protection for your chain in the harshest conditions imaginable. Our super sticky formula penetrates deep into the chain links offering extreme lubrication no matter how wet the ride. For easy removal after your ride, use R&G Nano Bike Wash and Chain Cleaner.
The R&G Superbike Outdoor Cover has been redesigned for 2017 to include many new features. Based off our original award winning design and made of quality waterproof material, the cover also features elasticated rim and Belly straps as standard ensure the cover stays fixed in place and stops wind, mud or water getting up inside the cover and ensure a tight fit around the base. Front and rear chain loops for security devices covered by a velcro® closing flap to ensure the cover is fully waterproo...
R&G Heat Shield has been specifically designed to protect components from the damaging effects of radiant heat. It features a composite construction of aluminium foil, silicone adhesive, glass cloth and flame resistant polyurethane, optimising barrier performance up to 500 degrees C, with minimal weight and material thickness. Presented in a self-adhesive format making it simple to install.
It has a higher than average 20mu aluminium foil face making it extremely durable and resilient e...
The all-new R&G transparent PPE face shield can effectively block harmful substances to protect your entire face.
R&G Knee Sliders have been put to the test extensively around the world, from the British Superbike Championship to top race schools, our Knee Sliders are trusted by many riders on many tracks and Roads. R&G Factory GP Knee Sliders are designed with the track enthusiast in mind. Developed in partnership with some of the best British Superbike riders, our Factory GP Knee Sliders feature a new, harder-wearing compound for increased durability and a wide rear profile, to offer a
maximum range o...
This R&G Chain Guard is made from stainless steel, ensuring the chain and sprocket are fully protected as well as preventing material (lube) flicking up off the chain and onto the tyres (or onto your bike wear!).
This Chain Guard was designed specifically for the Royal Enfield Interceptor 650 ’19- and Continental GT 650 ’19- Models.
Our Elevation series Paddock Stands are modular for easy disassembly and transportation yet strong and sturdy when assembled.
This model is a Front Paddock Stand and has specially designed adapters on the arms which hook and slot into the underside of the forks legs.
Made from high quality FE360 tubular steel and powder coated black for a superb crisp finish. Coming supplied with 4 high quality red castors wheels for smooth rolling action and extra stability.
Our Elevation series Paddock Stands are modular for easy take down and transportation yet strong and sturdy when assembled.
This model is a Rear Paddock Stand and has specially designed hooks and adjustable arms fully compatible with our cotton reels and spindle sliders.
Made from high quality FE360 tubular steel and powder coated black for a superb crisp finish. Coming supplied with 4 high quality red castors wheels for smooth rolling action and extra stability.
The T3 is a unique and innovative approach to the common turn signal blending white visibility lighting, red brake lighting, and amber turn signal lighting into one modular system. The front T3 turn signal pods feature super bright white running lights that switch to amber when your turn signal is activated, while the rear T3 signal pods feature super bright red LEDs for run and brake functionality that also switch to amber when your turn signal is activated. Unlike other switchback turn signals...
The T3 is a unique and innovative approach to the common turn signal, blending white visibility lighting, red brake lighting and amber turn signal lighting into one modular system. The front T3 turn signal pods feature super bright white running lights that switch to amber when your turn signal is activated, while the rear T3 signal pods feature super bright red LEDs for run and brake functionality that also switch to amber when your turn signal is activated. Unlike other switchback turn signals...
The T3 is a unique and innovative approach to the common turn signal, blending white visibility lighting, red brake lighting and amber turn signal lighting into one modular system. The front T3 turn signal pods feature super bright white running lights that switch to amber when your turn signal is activated, while the rear T3 signal pods feature super bright red LEDs for run and brake functionality that also switch to amber when your turn signal is activated. Unlike other switchback turn signals...
DENALI T3 Modular Switchback Signal Pods | Rear with License Plate Mounting Kit
These unique turn signals were designed in collaboration with Analog Motorcycles to create the smallest possible turn signal that could still put out a significant amount of light. These signals are specifically designed for custom and sports applications where riders want a super low profile look but don't want to sacrifice functionality. Each pod features two high-power 3 watt LEDs packed into a durable cast aluminium housing coated in a satin black powder coat finish. Don't let their small si...
DENALI Micro Turn Signal Spacer Kit
The T3 is a unique and innovative approach to the common turn signal, blending white visibility lighting, red brake lighting and amber turn signal lighting into one modular system. The front T3 turn signal pods feature super bright white running lights that switch to amber when your turn signal is activated, while the rear T3 signal pods feature super bright red LEDs for run and brake functionality that also switch to amber when your turn signal is activated. Unlike other switchback turn signals...
WD-40 Smart Straw is the same reliable Multi-Use Product, specially designed for precision application. The Smart Straw applicator is great for reaching those tight spaces in gears and mechanisms.
The clever design also incorporates Spray 2 Ways technology. Simply flip the Smart Straw down against the can, and the wide spray nozzle is still at your disposal should you need greater coverage.
What WD-40 Smart Straw does:
360° valve allows for upright or upside down applicatio...
The STORM Handguard is designed for Street, Cruiser, Naked and Adventure bikes as well as Scooters. Single point mounting systems offer maximum protection from the elements with style. Supplied as a complete kit with all hardware and STORM plastic guards included.
Available in 4 styles to install onto most Street, Cruiser, Naked and Adventure bikes. Including Handle Bar Clamp mounts available in 22mm (7/8") and 25.4mm (1") variants as well as Bar End Mounting solutions for 6mm/8mm inter...
based on 1 review
Stylish fabric handguard design, lined with a waterproof membrane.
Can be fitted to almost any handlebar set up.
Flexes around fairing/windscreen at full steering lock.
Ideal for faired Sports and Touring motorcycles.
Anti-flap design is self-supporting under wind pressure.
Leaves controls free of interference.
Maximum cold weather protection.
Can be fitted independently or over Barkbusters backbones.
All mounting hardware included to fit:
To handlebar (M...
RD Moto Oil Filler CapRDM-OC4B, RDM-OC4G, RDM-OC4K, RDM-OC4N, RDM-OC4O, RDM-OC4R, RDM-OC4S
Available in a range of coloured anodised Aluminium options, RD Moto Oil Filler Cap directly replace the OE oil cap with a more colourful and stylish variant. Installation and tightening is a breeze thanks to the hex key/Allen key socket atop the cap and they include a replacement O ring seal to ensure a perfect seal.
This RD-Moto Oil Filler Cap (sized M20x1.5) is suitable for the Suzuki GSX-R600/750/1000, Aprilia Shiver 900 '18-, GSX-S750/1000, SV650 '18-, Royal Enfield Interceptor 650...
Filter Results