Shop By BikeSetting the standard in crash protection and bolt-on motorcycle accessories.
You're viewing All Products for KTM - 990 SMR
Showing 1-50 of 116 results
Our all-new Stainless Steel Bar Ends have been specially developed and shaped for your bike - slightly heavier than the original bar ends, for less vibration.
The stainless steel finish with lasered R&G logo gives you the ultimate corrosion protection, whilst looking great and helping to protect those expensive levers and clip-ons from damage in the event of a drop or crash.
Designed for the KTM 690 Duke IIII ('12- onwards), KTM 990SMR ('08-'12) KTM 1290 Super Duke R '14- & Hus...
These crash protectors are suitable for the KTM 950 Supermoto R, 990 Super Duke, 990 Supermoto'08, 990R Super Duke and 990 SMT. The product fits to the front upper engine mount of the bike.
Available in Black or Orange options.
These crash protectors are suitable for the KTM 950 Supermoto, 950 Supermoto R, 990 Super Duke, 990R Super Duke, 990 Supermoto '08 and 990 SMT. They fit to the front lower engine mount of the bike.For the 950 Supermoto R, 990 Super Duke, 990R Super Duke and 990SMT, these crash protectors can be fitted in conjunction with our front upper engine crash protectors (SKU: CP0153) or fitted on their own.
Available in Black or Orange Options
Tidy up your rear end with a stainless steel R&G Tail Tidy/Licence Plate Holder.
Made from stainless steel for strength and powder coated black for great looks and durability. Our tail tidy units are easy to fit and transform the rear of the bike. Supplied with an replacement rear brakelight with built in licence plate illuminator.
This model is suitable for the KTM 950 Supermoto, 950 Supermoto R, 990 Supermoto and 990 Supermoto R ('08-'12) and KTM 990 SMR Models ('12- onward...
Universal Licence plate adapters to suit different number plates hole widths, once installed enable a certain amount of flexibility when fitting the a number plate, replacing the need to redrill your number plate.
Available in a one size fits all.
Supplied in pairs.
NO TAIL TIDY BRACKET IS SUPPLIED WITH THIS KIT
R&G Radiator Guards are available in Black o Orange to fit the KTM 990 SMR ('12- onwards),KTM 990 SM ('08- onwards) and KTM 990SMT ('08- onwards).
Made from pressed aluminium and feature a neat, seamless frame (where applicable). They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris.
No permanent modifications need to be made to the bike.
Picture is for illustration purposes only.
Available in a 16"x 12" sheet, this R&G Titanium universal mesh is both lightweight and super strong, thanks to its real Titanium (ASTM B265 Grade 1) mesh construction.
Made from the same high quality mesh found on in our Titanium radiator and oil cooler guards, it improves the looks of your bike and help to protect your expensive and vulnerable radiator and other components from flying road debris.
No permanent modifications need to be made to the bike.
Supplied with...
Suitable for the KTM LC8 - Left Hand Side Crank Case Cover.
Made in the U.K.
Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Series for use in any competition sanctioned by these Organisations. This app...
Suitable for the KTM LC8 Right Hand Side Crank Case Cover.
Made in the U.K.
Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Series for use in any competition sanctioned by these Organisations. This appr...
Suitable for the KTM 950 Supermoto and Supermoto 'R', 990 Adventure, 990 SMT, 990 Super Duke, 990R Super DukeOur industry-leading Engine Case Covers are now available in kit form containing all the covers R&G offer for your bike in one go. Developed on track and brought to the road, R&G Engine Case Covers bring BSB and Moto America race series-approved levels of engine protection to your bike for complete peace of mind.
Made in the U.K.
Extensively used around the world by thou...
This Carbon engine case slider reinforced with DuPont™ Kevlar® fits the left hand side only and is suitable for the KTM Super Duke LC8, 950/990 Adventure, 950/990SM,990SMT,990SMR and 990 Super Duke R models.
This Carbon engine case slider reinforced with DuPont™ Kevlar® fits the right hand side only and is suitable for the KTM 990 Super Duke LC8, 950/990 Adventure, 950/990SM, 990SMT, 990SMR models.
These bar end protectors have been specially developed and shaped to suit the looks and needs of the KTM 690 Duke IIII ('12- onwards) and KTM 990SMR ('08-'12) and KTM 1290 Super Duke R '14- & Husqvarna Vitpilen/ Svartpilen 401 '18-/ Svartpilen 701 '19- Models.
Helping to protect those expensive levers and clipons from damage in the event of a drop or crash.
Kaoko Throttle Stabilizer for the KTM LC4 640 Adventure, 690 SM / SE / E, LC8 950 Adventure, 950 Adventure S, 950 Supermoto / Enduro, 990 Adventure / S / R / Dakar, 990 SMR / SMT, (with Barkbusters VPS and STORM handguards).
Awarded RiDE magazine Best buy award status.
R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.
Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and scooters). In only 2 minutes the grips heat up to 35°C (95°F) and on those r...
based on 1 review
R&G Premium Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.
All new Premium Features:
-Heat Setting Memory
-Auto Cut-Out
-Fully Waterproof
-New Grip Design
Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and...
Eliminate that annoying spinning grip by getting a tube of grip glue. Holds grips firmly in place. Helps to reduce arm pump caused by trying to hold spinning grips in place.
Ideally suited to be used when installed R&G Heated Grips.
Improve your vision, confidence and safety all year round while you ride!
This ground-breaking product enables you to WASH your visor while on the bike.
Unique wash/wipe action that’s incredibly easy to use: 1. Fill the tank with Visorcat wash (supplied). 2. Wash by moving Visorcat across your visor one way. 3. Wipe the residue away by moving Visorcat across your visor in the other direction. The result is 100% clear vision in all conditions. Keep the sponge clean by rinsing i...
Our all-new version of the R&G Brake Lever Guard kit can be fitted to the brake and comes with our universal fitting kit, its expanding design clamps to the inside of the clipon/handlebar (13-21mm diameter) and is available in a range of colour options.
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, MotoAmerica, FIM) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clu...
This R&G Moulded Lever Guard kit can be fitted to either the brake or clutch sides and comes with our universal fitting kit, its expanding design clamps to the inside of the clipon/handlebar (13-21mm diameter) and is available in a range of colour options.
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch l...
These fork protectors are suitable for the KTM 790 Duke 2018, 990R/990 Super Duke, KTM 950 Supermoto, 990 Supermoto, SMR and SMT & 890 Duke R '20- models, helping to eliminate damage to the front forks during a drop.
These swingarm protectors are suitable for the KTM 950 Supermoto, 990 Super Duke, 990R Super Duke & 990 Supermoto models.
Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.
Patent No: GB2459728
This Round Exhaust Protector (Can Cover) will fit both left and right cans/exhausts. This protector is a similiar design to the oval supermoto exhaust protector but with a 100mm diameter.
Made in the U.K.
R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.
If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors.
In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0002 (see related products below) - in some cases more than one resister must be used inline.
Supplied as a pair
The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators.
Please check the existing Indicator Relay for the number of pins on your connector before ordering - if you are still unsure please ask your local dealer.
The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators.
Please check the existing Indicator Relay for the number of pins on your connector before ordering - if you are still unsure please ask your local dealer.
Are your micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you will find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.
** Supplied as a pair **
These resistors are for the R&G Bulb Indicators. If you have R&G LED indicators, please use RGR0002
This R&G Fender Extender is compatible with the KTM SM950/990, SMR 950/990 models.
R&G Fender Extenders offer additional protection to front-mounted coolers, downpipes and fairing panels from debris, road grit, mud and water kicked up by the front wheel. Attaching to the motorcycle's front mud guard / fender via included adhesive strips and push rivets, installation takes only minutes.
R&G Chain Cleaner quickly removes all containments from your chain. Our formula breaks down even the toughest grime for easy, stress-free cleaning. For added cleaning power, consider using a brush to agitate contaminants before rinsing.
R&G Motorcycle Degreaser effectively removes built-up grime from your machine. Safe to use on metal, plastic and rubber, our specialised formula will cut through even the toughest grime, leaving a clean, 'like-new' finish. For added cleaning power, consider using a brush to agitate contaminants before rinsing.
R&G Disk Brake Cleaner can improve overall braking performance while prolonging the life of you brake discs and pads. Our formula is specially designed to remove brake dust, oil and any other contaminants that may affect braking performance.
R&G Silicone Shine leaves your machine looking as good as it did right from the factory. Our formula guarantees a deep, grime resistant shine.
R&G Helmet Fresh completely eradicates all odour from inside your helmet, leaving a fresh 'new helmet scent' every time! Our fast-drying formula will leave your helmet fresh and bacteria-free for those long rides. R&G Helmet Fresh is suitable for use on all fabrics. Why not try it on your gloves or clothing?
R&G Nano Bike Wash effortlessly breaks down and removes all dirt, grime and contaminants that may be on your machine after the hardest rides. Our specially-created formula biodegradable formula makes cleaning your machine a pleasure and leaves it looking its best!
R&G Nano Bike Wash effortlessly breaks down and removes all dirt, grime and contaminants that may be on your machine after the hardest rides. Our specially-created formula biodegradable formula makes cleaning your machine a pleasure and leaves it looking its best!
R&G Waterlesss Bike Wash is the easiest way to remove light contaminants from your machine between major washes. Our special formula effortlessly cleans all surfaces - with no water necessary! It leaves a streak-free, non-sticky, high shine from just one application.
R&G Anti-fog Solution prevents your vision from being obscured while on the go! Our formula creates a super-thin, transparent nanolayer to prevent your visor, goggles and eyewear from fogging up.
R&G Helmet & Visor Cleaner quickly removes all contaminants from helmets, visors and eyewear, Our specially-created PH-neutral formula is safe to use on all helmets and is fully biodegradable.
R&G Everyday Chain Lube offers maximum protection for your chain over long distances, in all weathers. Our formula penetrates deep into the chain links, offering extreme lubrication with no fling. Suitable for both road and off-road use. for easy removal, after you ride, use R&G Nano Bike Wash and Chain Cleaner.
R&G Dry Chain Lube provides the ultimate protection for your chain in dry and dusty conditions. Our wax-based formula ensures maximum lubrication while not attracting dirt and grit for a clean ride. For easy removal after your ride, use R&G Nano Bike Wash and Chain Cleaner.
R&G Wet Chain Lube provides the ultimate protection for your chain in the harshest conditions imaginable. Our super sticky formula penetrates deep into the chain links offering extreme lubrication no matter how wet the ride. For easy removal after your ride, use R&G Nano Bike Wash and Chain Cleaner.
The R&G Adventure Outdoor Cover fits on adventure and touring sized bikes and has been redesigned to include many new features. Based off our original award winning Superbike Cover design and made of the same quality waterproof material, the cover also features elasticated rim and Belly straps as standard ensure the cover stays fixed in place and stops wind, mud or water getting up inside the cover and ensure a tight fit around the base. Front and rear chain loops for security devices covered by...
The wireless system does not need any programming and features a compact LCD screen which fits into a magnetic mount placed on a prominent part of the bike. The fully sealed and buttonless device can be easily removed for security when parking unattended and is small enough to fit in a pocket.
16-Piece Modular Motorcycle Rim TapeRIMTAPE0001BLUE, RIMTAPE0001DKBLUE, RIMTAPE0001GR, RIMTAPE0001OR, RIMTAPE0001RE, RIMTAPE0001WH, RIMTAPE0001YE
R&G Rim Tape is designed specifically for 17" motorcycle wheels. Using only the highest-quality material available R&G's Rim Tape is designed to give years of service!
Available, in a large range of colours and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel w...
From sportsbikes to cruisers, R&G Tank Pads help protect your fuel tank, in style, from unwanted marks, as well as scratches from zippers/buckles and general wear and tearr with our newly developed 3 piece modular tank pad.
Please note: R&G Tank Traction Grips grips shown on the sides of the tank ARE NOT included but are available separately.
Keep your clutch reservoir protected with our handy Clutch Reservoir Protector (Booty)!
Now available in Black with White logo or Orange with Black logo!
Take care of your helmet with our R&G Racing Deluxe Helmet Bag!Made from a tough, hard-wearing outer and fleece lining, this universal helmet bag protects against dust and light knocks.
Our revolutionary tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike. ** Part does not include Ratchet Straps ** R&G Racing Handlebar Top Straps ST0001BL R&G Racing Handlebar Top Straps, 25mm Ratchet Straps, RG, R&G Racing, bike parts, motorbike supplies
R&G Ratchet straps are easy to use due to a one-handed fastening/quick-release mechanism. It makes tightening and loosening the strap a cinch, which is great for those times when you just need to get the job done!
Individual ratchet strap length: 72" (180cm) ** Part does not include top-strap ** 25mm Ratchet Straps ST0699 25mm Ratchet Straps ST0699
For top-strap please see: ST0001BL
Filter Results