Shop By BikeSetting the standard in crash protection and bolt-on motorcycle accessories.


You're viewing All Products for Husqvarna - 701 Svartpilen Showing all 34 results


RSS

Tail Tidy for Husqvarna Svartpilen 701 '19-LP0275BK

Radically tidy up the rear end of the Husqvarna Svartpilen 701 '19- with this R&G Tail Tidy.

R&G tail tidy unit is easy to fit and will radically transform the rear end of the bike, removing the expansive (and often ugly!) OEM licence plate holders - replacing them with a much sleeker looking unit.

£112.49ex. VAT
Full Details Add to Basket

Radiator Guard for the Husqvarna Svartpilen 701 '19-RAD0249

R&G Radiator Guards are available in black to fit the Husqvarna Svartpilen 701 '19- models. Made from pressed aluminium and feature a neat, seamless frame (where applicable). They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris. No permanent modifications need to be made to the bike.

£63.33ex. VAT
Full Details
- Options Available -

Engine Case Cover for Husqvarna Svartpilen 701 '19- (LHS)ECC0269BK

These exciting new Engine Case Covers have been developed in collaboration with selected race teams and crash tested within the R&G Racing Suzuki GSX-R Trophy. Crafted from 4mm polypropylene for strength, durability and good looks, they complement our crash protectors perfectly. The covers simply bolt on over the original engine casing so no messing with glue or removing anything. Slimline for maximum ground clearance, ultra lightweight, matt finish and protecting one of the most vulnerable part...

£0.00ex. VAT
Full Details
- Currently Unavailable -

Engine Case Cover for Husqvarna Svartpilen 701 '19- (RHS)ECC0270BK

These exciting new Engine Case Covers have been developed in collaboration with selected race teams and crash tested within the R&G Racing Suzuki GSX-R Trophy. Crafted from 4mm polypropylene for strength, durability and good looks, they complement our crash protectors perfectly. The covers simply bolt on over the original engine casing so no messing with glue or removing anything. Slimline for maximum ground clearance, ultra lightweight, matt finish and protecting one of the most vulnerable part...

£0.00ex. VAT
Full Details
- Currently Unavailable -

Bar End Sliders for KTM 1290 Superduke R '14- and KTM 690 Duke '12-, Husqvarna Vitpilen/ Svartpilen 401 & 701 Vitpilen '18-/ Svartpilen 701 '19- ModelsBE0060BK

These bar end protectors have been specially developed and shaped to suit the looks and needs of the KTM 690 Duke IIII ('12- onwards) and KTM 990SMR ('08-'12) and KTM 1290 Super Duke R '14- & Husqvarna Vitpilen/ Svartpilen 401 '18-/ Svartpilen 701 '19- Models.

Helping to protect those expensive levers and clipons from damage in the event of a drop or crash.

£26.66ex. VAT
Full Details Add to Basket

Kaoko Throttle Stabilizer for KTM 690 Duke/R , 990 Super Duke /R, 690R/SMC Supermoto, 690SM, 690SMR, 990R/T Supermoto, 950SM, 950SMR, 990SM, 990 SMT, Husqvarna Vitpilen 401/ 701 & Svartpilen 401 . Suitable for non-handguard models with bar end weightKA-KTM100

Kaoko Throttle Stabilizer for the KTM 690 Duke/R , 990 Super Duke /R, 690R/SMC Supermoto, 690SM, 690SMR, 990R/T Supermoto, 950SM, 950SMR, 990SM, 990 SMT. Fork Protectors for KTM 125,200 and 390 Duke & RC125/200 '14-, 1290 Super Duke R ’20- & Husqvarna Vitpilen/ Svartpilen 401 and Vitpilen 701 '18-. Suitable for non-handguard models with bar end weights.

£83.33ex. VAT
Full Details Add to Basket

Premium Motorcycle Heated Grips (for 22mm / 7/8-inch handlebars/ clipons)HGMCPREM

based on 1 review

R&G Premium Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.

All new Premium Features:
-Heat Setting Memory
-Auto Cut-Out
-Fully Waterproof
-New Grip Design

Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and...

£45.83ex. VAT
Full Details Add to Basket

Visorcat Wash/ Wipe System with sponge and 50ml bottle VC001

Improve your vision, confidence and safety all year round while you ride!

This ground-breaking product enables you to WASH your visor while on the bike.

Unique wash/wipe action that’s incredibly easy to use: 1. Fill the tank with Visorcat wash (supplied). 2. Wash by moving Visorcat across your visor one way. 3. Wipe the residue away by moving Visorcat across your visor in the other direction. The result is 100% clear vision in all conditions. Keep the sponge clean by rinsing i...

£30.82ex. VAT
Full Details Add to Basket

Dashboard Screen Protector Kit for Husqvarna Svartpilen 401 '18-/ Svartpilen 701 '19-/ Vitpilen 401 & 701 '18-DSP-HUS-001CL

The all-new R&G Second Skin Dashboard Protection kit is made from high quality, anti-scratch material. This bespoke screen protector kit has been designed to protect the delicate dashboard screen on your bike from unwanted scratches and marks.

Kit includes detailed instructions to aid in the dashboard protector placement, 2x dashboard protectors (1x spare), mini spray bottle, suede polishing cloth, wet & dry wipe, squeegee and dust removal strip.

£20.83ex. VAT
Full Details Add to Basket

Carbon Fibre Lever Guard for Ducati Monster 1200R '16-, Supersport (S) '17-, Scrambler 1100 '18- , KTM 650 SMCR '19-, Husqvarna 401 Vipilen & Svartpilen '18- / Svartpilen 701 '19-LG0008C

This Carbon Fibre Lever Guard kit has been specifically designed for the Ducati Monster 1200R '16-, Supersport (S) '17-, Scrambler 1100 '18- , KTM 650 SMCR '19-, Husqvarna 401 Vipilen & Svartpilen '18- / Svartpilen 701 '19- models.

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to whee...

£124.99ex. VAT
Full Details Add to Basket

Moulded Lever Guard for Ducati Monster 1200R '16-, Supersport (S) '17-, Scrambler 1100 '18- , KTM 650 SMCR '19-, Husqvarna 401 Vipilen & Svartpilen '18- / Svartpilen 701 '19-MLG0008BK, MLG0008BL, MLG0008GR, MLG0008OR, MLG0008RE

This R&G Moulded Lever Guard kit has been specifically designed for the Ducati Monster 1200R '16-, Supersport (S) '17-, Scrambler 1100 '18- , KTM 650 SMCR '19-, Husqvarna 401 Vipilen & Svartpilen '18- / Svartpilen 701 '19-

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (...

£33.33ex. VAT
Full Details
- Options Available -

Fork Protectors for the KTM 690 DUKE '12-, 690 Duke R '13-, KTM SMC-R 690 '19- & Husqvarna Vitpilen '18-/ Svartpilen 701 '19-FP0113

These fork protectors are suitable for the KTM 690 DUKE '12-, 690 Duke R '13-, KTM SMC-R 690 '19- & Husqvarna Vitpilen '18- / Svartpilen 701 '19- models. Easy to install, they help to eliminate damage to the front forks, fork bottoms and brake callipers during a crash or drop.

£29.99ex. VAT
Full Details
- Options Available -

Spindle Sliders for Husqvarna Vitpilen 701 '18- & Svartpilen 701 '19-SS0052BK

These spindle sliders mount directly through the rear spindle axle of the Husqvarna Vitpilen 701 '18- & Svartpilen 701 '19- providing both crash protection to the rear components, protecting the swingarm and components, like the brakes and drivetrain in the event of a crash or drop but also functioning as paddock stand bobbins, allowing the bike to be lifted up on a Rear Paddock Stand for cleaning and maintenance.

The best of both worlds!

£37.49ex. VAT
Full Details Add to Basket

Swingarm Protectors for the Husqvarna 701 Vitpilen '18- & Svartpilen 701 '19-SP0083BK

These Swingarm Protectors are for the Husqvarna 701 Vitpilen '18- & Svartpilen 701 '19- models.

£34.16ex. VAT
Full Details Add to Basket

R&G Tank Traction Grips for Husqvarna Vitpilen 701 '18- & Svartpilen 701 '19- EZRG1102BL

This 2-piece Tank Traction Grip kit has been specially designed for the Husqvarna Vitpilen 701 '18- & Svartpilen 701 '19- models.

R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body positi...

£23.33ex. VAT
Full Details Add to Basket

Shocktube ®SHOCK7BK

Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.

Patent No: GB2459728

£22.49ex. VAT
Full Details Add to Basket

Exhaust Hanger for the Husqvarna Svartpilen 701 '19-EH0095BK

This stylish R&G Exhaust Hanger has been specifically designed for the Husqvarna Svartpilen 701 '19- and not only reduces weight, but also gives the bike a sportier, sleeker look. With a classy, black, powder coated finish and R&G graphic, it is made from sturdy, aircraft-grade aluminium and will retain its good looks for many years.




£56.66ex. VAT
Full Details Add to Basket

Exhaust Hanger Kit for the Husqvarna Svartpilen 701 '19-EH0095BKA

This R&G Exhaust Hanger kit comes with both the Exhaust Hanger (EH0095BK) and Footrest Blanking Plate (BLP0097BK) for the other side. Specially designed to fit and suit the Husqvarna Svartpilen 701 '19- models stylish contours. This kit allows removal of the pillion pegs on both sides for that aggressive race/street bike look, whilst also allowing for your exhaust to be properly supported with a stylish R&G Exhaust Hanger. 

The Exhaust Hanger is made from 6mm aluminium, featuring a mode...

£67.49ex. VAT
Full Details Add to Basket

Rear Foot Rest Blanking Plates for Husqvarna Svartpilen 701 '19- (LHS) BLP0097BK

Once you have removed the pillion footrests, fill the void left behind and cover those otherwise exposed holes in the sub-frame with the R&G blanking plates.

This Footrest Blanking Plate have been specially designed to cover/protect the LHS of the Husqvarna Svartpilen 701 '19- model.

R&G Footrest Blanking Plates are easy to install, simply screwing into place in-place of the rear pillion pegs, covering those otherwise exposed sub-frame holes, that if left uncovered could resul...

£18.33ex. VAT
Full Details Add to Basket

Kickstand Shoe for Husqvarna Vitpilen 701 '18- / Svartpilen 701 '19- modelsPKS0119SI

Never forget your sidestand puck again! Kickstand Shoes bolt onto the bottom of the sidestand, to enlarge the original’s footprint by up to 100%, significantly spreading the load placed upon it, to help prevent the stand ‘piercing’ the ground. Despite this enlargement, the Shoe does not affect ground clearance or interfere with the chain run during normal riding. Available for nearly 100 different bikes, covering popular adventure, sports, naked and touring machines, each Shoe is bespoke to the ...

£31.66ex. VAT
Full Details Add to Basket

Indicator Adapter Kit for Micro Indicators (with resistors) for the Husqvarna Vitpilen 701/ 401 & Svartpilen 401 '18- & 701 '19- & KTM 790 Adventure '19- IA0004BK

When using micro indicators for the Husqvarna Vitpilen 701/ 401 & Svartpilen 401 '18- & 701 '19- & KTM 790 Adventure '19- , you will need the R&G Indicator Adapter kit (IA0004BK) which contains resistors, connectors and small rubber seals for one pair of indicators.

Resistors included and can be used on both front and rear indicator mounting points (please buy two sets for full bike coverage).

*Please note that the LED Indicators DO NOT come with this kit*



£24.99ex. VAT
Full Details Add to Basket

Toe Chain Guards for KTM RC 125/200/390 '14-, Husqvarna Vitpilen 701'18- & Svartpilen 701 '19-TG0011

R&G Racing's new, road-racing inspired toe guard has been developed in conjunction with roads hero Ryan Farquhar. Made from aluminium for a lightweight and strong product it features pre-drilled holes attaching to the existing mounts on the swingarm, ensuring effective coverage of the sprocket.

£27.49ex. VAT
Full Details
- Options Available -

Mirror Risers for M10x1.25 Thread MirrorsMR0005BK

These Mirror Risers are made from 6082 T6 Aluminium and are suitable for any bike with an M10x1.25 (Right hand threaded) mirror socket. Suitable for the 990SMT/1290SuperDuke/Z1000 '14-/Speed Triple '11-'15/390Duke/NC750X/ Honda CB125R '18-/ Aprilia Shiver 900 '18-/ Honda CB650R '19- / Svartpilen 701 '19- along with any bike with a M10x1.25 (right hand thread) mirror mounting points.

Risers are perfect for increasing rearward visibility while riding. This extender raises the mirror by 45...

£12.49ex. VAT
Full Details Add to Basket

Superbike Outdoor Cover BC0006BK, BC0006SI

The R&G Superbike Outdoor Cover has been redesigned for 2017 to include many new features. Based off our original award winning design and made of quality waterproof material, the cover also features elasticated rim and Belly straps as standard ensure the cover stays fixed in place and stops wind, mud or water getting up inside the cover and ensure a tight fit around the base. Front and rear chain loops for security devices covered by a velcro® closing flap to ensure the cover is fully waterproo...

£39.16ex. VAT
Full Details
- Options Available -

MICHELIN Tyre Pressure Monitoring System for Motorbikes MICHTPMS1

The wireless system does not need any programming and features a compact LCD screen which fits into a magnetic mount placed on a prominent part of the bike. The fully sealed and buttonless device can be easily removed for security when parking unattended and is small enough to fit in a pocket.

£66.66ex. VAT
Full Details Add to Basket

R&G Heat ShieldRGHEATSHIELD

R&G Heat Shield has been specifically designed to protect components from the damaging effects of radiant heat. It features a composite construction of aluminium foil, silicone adhesive, glass cloth and flame resistant polyurethane, optimising barrier performance up to 500 degrees C, with minimal weight and material thickness. Presented in a self-adhesive format making it simple to install.

It has a higher than average 20mu aluminium foil face making it extremely durable and resilient e...

£24.99ex. VAT
Full Details
- Options Available -

R&G PPE Face Shield RGPPEFACESHIELD

The all-new R&G transparent PPE face shield can effectively block harmful substances to protect your entire face.

£8.00ex. VAT
Full Details Add to Basket

Wider Aero Knee Sliders

Our Wider Profile Aero Knee Sliders are extensively used all over the world, seen on the best riders, best roads and best tracks. They are used by many riders in the British Superbike Championship (amongst others) and race schools worldwide.

Developed with the feedback of racers and road riders alike. we made our latest generation Aero Knee Sliders, from a special blend of composite materials to ensure the riders gets the best overall performance available.

Attaching to your su...

£24.16ex. VAT
Full Details
- Options Available -

R&G Brake Lines (Please read description to find out how to order)R&G Brake Lines

Made by HEL - Brought to you by R&G.

The HEL Performance brake line fittings offer safety, security and a slimline attractive finish. All hoses are supplied to the FMVSS-106 standard and the kits contain all items required for a complete installation including stainless steel banjo bolts and copper washers.

£0.00ex. VAT
Full Details
- Please email your bike make, model and year to : sales@j20motorsport.co.uk for a quote. -

DENALI MT Series Waterproof Connector Set, Male & Female Connectors With Terminals & SealsDENDNL.CTR.MT04

These premium MT Series Waterproof Connectors are used in the DENALI 2.0 lights and harnesses. The kit includes both the male and female connector, crimp-on terminals, as well as waterproofing wire seals. Using an affordable crimping tool, these connectors can be crimped onto wires in seconds to modify, customize, or replace electrical connections.

You can also use these connector sets to make plug and play connections of other brands of accessories to the DENALI CANsmart Controller or ...

£4.99ex. VAT
Full Details Add to Basket

WD-40 Flexible Straw SystemWD44688

Unlike its Smart Straw predecessor it keeps its shape, so it is ideal for precision work in a wide variety of sectors.

Flexible also has a taller, thinner 400ml can which cleverly reduces overuse and waste, as well as allowing for a longer straw. The Spray 2 Ways technology and the 360° valve allow the product to be applied in almost any position. The Flexible Straw allows you to Reach The Unreachable!

What WD-40 Flexible does:
Longer straw means you can reach the unreachab...

£9.15ex. VAT
Full Details Add to Basket

WD-40 Smart StrawWD44189

WD-40 Smart Straw is the same reliable Multi-Use Product, specially designed for precision application. The Smart Straw applicator is great for reaching those tight spaces in gears and mechanisms.

The clever design also incorporates Spray 2 Ways technology. Simply flip the Smart Straw down against the can, and the wide spray nozzle is still at your disposal should you need greater coverage.

What WD-40 Smart Straw does:
360° valve allows for upright or upside down applicatio...

£8.33ex. VAT
Full Details Add to Basket

WD-40 Multi-Use Product 5L ContainerWD44506

If you use WD-40 Multi-Use Product in the workplace, an aerosol can is often not large enough for all your needs. Therefore, we offer WD-40 Multi-Use Product in a 5L container, for professional users and industry-specific needs.

When it comes to moisture displacement, lubrication and removing stubborn grease and grime, WD-40 Multi-Use Product is unrivalled, and with our Multi-Use 5L Containers, you’ll never be left stuck without.

What WD-40 Multi-Use Product does:
Displaces...

£31.24ex. VAT
Full Details Add to Basket

RD Moto Oil Filler Cap for KTM 690 Duke/R, 990 Superduke/R and 1290 Superduke R and GT & 790 Adventure / Husqvarna Svartpilen 701 '19-RDM-OC9O

Available in an Orange coloured anodised Aluminium option, this RD Moto Oil Filler Cap directly replace the OE oil cap with a more colourful and stylish variant. Installation and tightening is a breeze thanks to the hex key/Allen key socket atop the cap and a replacement O ring seal is included to ensure a perfect seal.

This RD-Moto Oil Filler Cap (sized M24x3.0) is suitable for the KTM 690 Duke/R, 990 Superduke/R and 1290 Superduke R, GT & 790 Adventure Husqvarna Svartpilen 701 '19- an...

£14.99ex. VAT
Full Details Add to Basket

 
© 2020 Racing Technique Ltd. (t/a R&G)
Our Terms of use have changed

Please review and agree to continue to use the R&G website.

AGREE AND CONTINUE