Shop By BikeSetting the standard in crash protection and bolt-on motorcycle accessories.

This 6-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go through a PVD (physical vapour deposition) treatment, ensuring longevity and corrosion resistance.

• Only use Manufacturer torque settings, between 33 - 45nm.
• Kits are offered as bike-specific fitments. If you have a variation of a standard model you may require an alternative kit. ...

Our industry leading crash protectors are now available for the Ducati Monster 821 '14-, Monster 1200 '14-, Ducati Monster 1200S '14- and Ducati Monster 1200R '16-, they offer essential protection to the bike frame, engine and radiator keeping them raised up and away from the tarmac in the event of a crash or drop.

This kit requires no modification to install.

R&G Aero Bobbins from R&G - the market leaders in crash protection and the only insurance-approved crash protectors...

Radically tidy up the rear end of both the Ducati Monster 821 '18-, 1200 (S) '17- & 1200R '18- models with this R&G Tail Tidy.

Its stainless steel and matte black powder coated construction and design ensures a long-lasting durability and performance.

R&G Tail Tidies are easy to fit and will radically transform the rear end of the bike, removing the expansive (and often ugly!) OEM licence plate holders - replacing them with a much sleeker looking unit, tucking the number plate ...

Radically tidy up the rear end of both the Ducati Supersport (S) '17- and Ducati Monster 1200S '17 models with this R&G Tail Tidy.

Its stainless steel and matte black powder coated construction and design ensures a long-lasting durability and performance.

R&G Tail Tidies are easy to fit and will radically transform the rear end of the bike, removing the expansive (and often ugly!) OEM licence plate holders - replacing them with a much sleeker looking unit, tucking the number p...

Tidy up your bike's rear end with this R&G Tail Tidy/Licence Plate Holder for the Ducati Monster 821 '14-'17 and Ducati Monster 1200 '14-'16.

Made from Stainless Steel, it includes a rear number plate illuminator. Powder coated black for durability and a high quality finish. Designed using the latest 3D scanning technology for an exact fit.

Compatible with both the OEM or R&G Micro indicators (RG370/RG371/RG372).

They are made from pressed aluminium and feature a neat, seamless frame (where applicable).  They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris.


No permanent modifications need to be made to the bike.

The R&G Stainless Steel Radiator Guard series is a more rugged version of our existing aluminium offering and are aimed particularly at Adventure and Touring bikes. Constructed from stainless steel allowing the guard to be incredibly strong and impervious to rust – perfect for bikes and riders who may tackle demanding terrains and conditions. The laser-cut grills are designed for maximum airflow to the radiator so that cooling isn't compromised; the Radiator Guard is as good looking as it is pur...

Made in the U.K.

These exciting new Engine Case Covers have been developed in collaboration with selected race teams and crash tested within the R&G Racing Suzuki GSX-R Trophy. Crafted from 4mm polypropylene for strength, durability and good looks, they complement our crash protectors perfectly.

The covers simply bolt on over the original engine casing so no messing with glue or removing anything. Slimline for maximum ground clearance, ultra lightweight, matt finish and pr...

This right hand side engine case cover fits the Ducati Multistrada 1200 '10-'14 & Monster 1200 & S '14-.

Made in the U.K.

Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Series for use in any competitio...

This right hand side engine case cover fits the Ducati Monster 1200 R '16-.

Made in the U.K.

Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Series for use in any competition sanctioned by these Organis...

Suitable for the Ducati Monster 1200 R '16- and the Monster 1200 S 950 '17-

Made in the U.K.

Our industry-leading Engine Case Covers are now available in kit form containing all the covers R&G offer for your bike in one go. Developed on track and brought to the road, R&G Engine Case Covers bring BSB and Moto America race series-approved levels of engine protection to your bike for complete peace of mind.

Extensively used around the world by thousands of road riders, tr...

Made from aluminium for excellent strength and crash resistance, its black anodized finish ensures a great looking and long lasting product.

Fits left hand side only.

Helping to protect expensive levers and clip ons from damage in the event of a drop, crash or slide.

Easy to install they simply screw into place taking only seconds.

Protect your bars with our great little bar end sliders/protectors. Suitable for Renthal bars, LSL bars, Ducati 848 '08- / Ducati Diavel (2011-), Monster 1200 & S '14-, KTM RC125/200 '14-

Please Note, if fitting to a bike with closed ended grips, Modification will be required to install these bar ends.

Kaoko Throttle Stabilizer for Ducati 848 EVO models (2008-); Ducati 1100 EVO models (2008-);Monster 1200/S (2014-), Monster 796 ABS (2010-) (including matching left hand side Bar-End weight : black finish). For Models with 14mm ID handle bars. Please check handle bar is 14mm ID before ordering.

Kaoko Throttle Stabilizer for Ducati 848 EVO models (2008-); Ducati 1100 EVO models (2008-);Monster 1200/S (2014-), Monster 796 ABS (2010-) (including matching left hand side Bar-End weight : black finish). For Models with CRG Mirrors.

Kaoko Throttle Stabilizer for Ducati Monster 1200 (2013-) with CRG Mirrors.

Awarded RiDE magazine Best buy award status.

R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.

Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and scooters). In only 2 minutes the grips heat up to 35°C (95°F) and on those r...

R&G Premium Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.

All new Premium Features:
-Heat Setting Memory
-Auto Cut-Out
-Fully Waterproof
-New Grip Design

Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and...

Improve your vision, confidence and safety all year round while you ride!

This ground-breaking product enables you to WASH your visor while on the bike.

Unique wash/wipe action that’s incredibly easy to use: 1. Fill the tank with Visorcat wash (supplied). 2. Wash by moving Visorcat across your visor one way. 3. Wipe the residue away by moving Visorcat across your visor in the other direction. The result is 100% clear vision in all conditions. Keep the sponge clean by rinsing i...

The all-new R&G Second Skin Dashboard Protection kit is made from high quality, anti-scratch material. This bespoke screen protector kit has been designed to protect the delicate dashboard screen on your bike from unwanted scratches and marks.

Kit includes detailed instructions to aid in the dashboard protector placement, 2x dashboard protectors (1x spare), mini spray bottle, suede polishing cloth, wet & dry wipe, squeegee and dust removal strip.

Our all-new version of the R&G Brake Lever Guard kit can be fitted to the brake and comes with our universal fitting kit, its expanding design clamps to the inside of the clipon/handlebar (13-21mm diameter) and is available in a range of colour options.

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, MotoAmerica, FIM) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clu...

Our all-new version R&G Brake Lever Guard kit has been specifically designed for the Ducati Monster 1200R '16-, Supersport (S) '17-'20, Scrambler 1100 '18- , KTM 650 SMCR '19-, Husqvarna 401 Vipilen & Svartpilen '18- / Svartpilen 701 '19- & Ducati Streetfighter V4 (S) '20- & Supersport 950 '21-

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, MotoAmerica, FIM) and required for racing, the 'Lever Guard' was developed to help avoid the ac...

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filters; again potentially causing front brake engagement.

This Carbon Fibre Lever Guard kit has been specifically designed for the Ducati Monster 1200R '16-, Supersport (S) '17-'20, Scrambler 1100 '18- , KTM 650 SMCR '19-, Husqvarna 401 Vipilen & Svartpilen '18- / Svartpilen 701 '19- Streetfighter V4 (S) '20- & Supersport 950 '21- models.

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement ...

This R&G Moulded Lever Guard kit can be fitted to either the brake or clutch sides and comes with our universal fitting kit, its expanding design clamps to the inside of the clipon/handlebar (13-21mm diameter) and is available in a range of colour options.

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch l...

This R&G Moulded Lever Guard kit has been specifically designed for the Ducati Monster 1200R '16-, Supersport (S) '17-'20, Scrambler 1100 '18- , KTM 650 SMCR '19-, Husqvarna 401 Vipilen & Svartpilen '18- / Svartpilen 701 '19- & Ducati Streetfighter V4 (S) '20- & Supersport 950 '21-

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement o...

They help to eliminate damage to the front forks during a drop.

Providing both crash protection to the rear components, protecting the swingarm and components, like the brakes and drivetrain in the event of a crash or drop but also functioning as paddock stand bobbins, allowing the bike to be lifted up on a Rear Paddock Stand for cleaning and maintenance.

The best of both worlds!

This product covers exposed holes in the rear spindle, nuts and lock pins keeping them clean and free of debris build up.

A silver-finished spacer is complimented by a black cap/cover which has white graphics on it, for a superb looking and finish.

Sold as a kit containing parts for both left and right-hand sides.

This R&G Tank Traction Grip sheet kits consists of 2x sheets of the special R&G Traction Grip textured material (sized 265mm x 110mm each), cut to a universal tank shape.

R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to mai...

This R&G Tank Traction Grip kit has been specially designed for the Ducati Monster 1100 / 1100 EVO '10-, Monster 821, Monster 1200 / 1200 S '14- and Monster 797 '17

R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Tank Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling t...

This 2pcs R&G Boot Guard kit has been specially designed for the Ducati Monster 821 / Monster 1200 ('14- models).

R&G Boot Guard kits are available for a large range of bike styles and brands, with new applications released regularly. The unique R&G texture was specifically designed to be durable, providing the rider with a buffer between his boot on the exposed areas of the swingarm which can (on occasion) come into contact with each other during cornering causing wear and unwanted dam...

Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.

Patent No: GB2459728

This Round Exhaust Protector (Can Cover) will fit both left and right cans/exhausts. This protector is a similiar design to the oval supermoto exhaust protector but with a 100mm diameter.
Made in the U.K.

This stylish R&G Exhaust Hanger has been specifically designed for the Ducati Monster 1200 R '16- model and not only reduces weight, but also gives the bike a sportier, sleeker look. With a classy, black, powder coated finish and R&G graphic, it is made from sturdy, aircraft-grade aluminium and will retain its good looks for many years.

Tidy up the rear of your Ducati Monster 1200 R '16- with an R&G Foot Rest Blanking Plate.

Once you have removed the rear footrest pillion hangers, fill the void left behind and cover those otherwise exposed holes in the sub-frame with an R&G blanking plate.

Never forget your sidestand puck again!

Kickstand Shoes bolt onto the bottom of the sidestand, to enlarge the original’s footprint by up to 100%, significantly spreading the load placed upon it, to help prevent the stand ‘piercing’ the ground. Despite this enlargement, the Shoe does not affect ground clearance or interfere with the chain run during normal riding.

This R&G Headlight Shield is specially designed to fit Ducati Monster 1200 '14-, 1200R '16-, 1200S '14- models.

Made from 2.5mm or thicker, clear, scratch-resistant acrylic, they offer the very best in optical clarity to maintain headlight performance and visibility, as well as offering excellent strength and protection from stones and other road debris - be it on the racetrack or your favourite green lane! The UV-stabilised acrylic used in their construction ensures R&G Headlight Shi...

R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors.

In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0002 (see related products below) - in some cases more than one resister must be used inline.

Supplied as a pair

The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators.

Please check the existing Indicator Relay for the number of pins on your connector before ordering - if you are still unsure please ask your local dealer.

The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators.

Please check the existing Indicator Relay for the number of pins on your connector before ordering - if you are still unsure please ask your local dealer.

R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of our iconic Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs, they come with clear lenses and illuminate on the side for additional visibility.

Available in two colour options: Black or Silver.

Can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors. ...

Are your micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you will find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.

** Supplied as a pair **


These resistors are for the R&G Bulb Indicators. If you have R&G LED indicators, please use RGR0002

This frame insert kit is suitable for the Ducati Monster 1200 & S '14- and Monster 821 '14-.

This 6 piece kit covers exposed holes in the frame protecting the frame from damage and debris build up.

Finished in Black with white print for a superb finish.

Sold as a kit consisting of 6 frame inserts for both the left and right hand sides.

This frame plug fits neatly into the left hand side front or rear hole, and the right hand side rear hole found on the frame on the Ducati Monster 1200 all models '14-.

Protecting it from road grime, mud and debris build up.

This frame plug fits neatly into the right hand side front hole found on the frame on the Ducati Monster 1200 all models '14-.

Protecting it from road grime, mud and debris build up.

These Mirror Risers are made from 6082 T6 Aluminium and are suitable for any bike with an M8 x 1.25 threaded mirror socket.

Risers are perfect for increasing rearward visibility while riding. This extender raises the mirror by 45mm further up from original.

Easy to fit. Simply unscrew your mirrors, screw the adaptor in place, and then refit your mirrors.

Suitable for models including the Ducati Diavel and Diavel Strada models ('10-_ and Rieju RS3 125 ('13-) models.

R&G Chain Cleaner quickly removes all containments from your chain. Our formula breaks down even the toughest grime for easy,  stress-free cleaning. For added cleaning power, consider using a brush to agitate contaminants before rinsing. 

R&G Motorcycle Degreaser effectively removes built-up grime from your machine. Safe to use on metal, plastic and rubber, our specialised formula will cut through even the toughest grime, leaving a clean, 'like-new' finish. For added cleaning power, consider using a brush to agitate contaminants before rinsing.