Shop By BikeSetting the standard in crash protection and bolt-on motorcycle accessories.
You're viewing All Products for Aprilia - RSV4-RR
Showing 1-50 of 128 results
This 5-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go through a PVD (physical vapour deposition) treatment, ensuring longevity and corrosion resistance.
• Only use Manufacturer torque settings, between 33 - 45nm.
• Kits are offered as bike-specific fitments. If you have a variation of a standard model you may require an alternative kit. ...
R&G Second Skin Tank Protection kit is a non-yellowing (UV Stable), ultra-tough, easy-to-apply, polyurethane protective film. Designed to protect the paint against rubbing from clothing & motorcycle leathers.
R&G Second Skin Tank Protection kit is easy to install when used in conjunction with the advanced fitting solution (included). R&G Second Skin Tank Protection kit is extremely conformable around compound curves of modern motorcycle tanks, making it simple to fit, even at home.
These frame skidders are available in black. Suitable for the Aprilia V4 Tuono '11- and Aprilia RSV4R and RSV4R Factory Models (including APRC models).
Utilising the same material as our famous R&G Aero Bobbins, these skidders combine the excellent crash resistance required with the subtle styling a skidder allows.
R&G Crash Protection - the market leaders in crash protection and the only insurance approved crash protectors on the market. As used by some of the worlds top race...
These crash protectors are suitable for the Aprilia RSV4/RSV4R Factory 2009 onwards, V4 Tuono 2011 onwards and V4 Tuono 1100 2015 onwards.
Tidy up the rear end of the Aprilia RSV4 RR, RSV-4 RF, Tuono V4 1100 '15- and Aprilia RSV-4 1100 Factory ’19- with an R&G powder coated stainless steel R&G Tail Tidy/Licence Plate Holder.
Made from stainless steel for superior strength, with the removable indicator bracket made from aluminium for minimal weight, each piece is powder coated black for great looks and durability. Our tail tidy units are easy to fit and transform the rear of the bike, removing the expansive (and ugly!) OEM ...
Available in black or Titanium powder coat finishes, this radiator guard fits the Aprilia RSV4 RF ('15-), Tuono 1100 ('15-) and Aprilia RSV-4 1100 Factory (’19-).
Made from pressed aluminum and feature a neat, seamless frame (where applicable). They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris.
Please note: Lower Oil Cooler Guard available separately - OCG0025BK
Available for the Aprilia V4 Tuono 1100 '15- , RSV4 RR '15- , RSV4 RF, RSV-4 1100 Factory '19- models, this R&G Titanium oil cooler guard is both lightweight and super strong, thanks to its real Titanium (ASTM B265 Grade 1) mesh construction encased in a seamless aluminium frame.
This specific R&G Oil Cooler Guard is made from an expanded ASTM B265 Grade 1 Titanium sheet and features a neat, seamless aluminium frame, securely holding the guard in place (utilising existing mounting or br...
R&G Oil Cooler Guards are available in a black or titanium finish. They are made from pressed aluminium and feature a neat, seamless frame. They improve the looks of your bike and help to protect your expensive and vulnerable oil cooler from flying debris.No permanent modifications need to be made to the bike.This oil cooler guard is suitable for the Aprilia RSV4 RF, Tuono 1100 '15- and Aprilia RSV-4 1100 Factory ’19-.
Please note this product is only for the oil cooler, Radiator guard...
The R&G Stainless Steel Oil Cooler Guard series is a more rugged version of our existing aluminium guard.
Constructed from 1mm stainless steel sheet allows the guard to be incredibly strong and impervious to rust – perfect for bikes and riders who may tackle demanding terrains and conditions.
The laser-cut grills are designed for maximum airflow to the Oil Cooler so that cooling isn't compromised; the Oil Cooler Guard is as good looking as it is purposeful.
This oil c...
The R&G Stainless Steel Radiator Guard series is a more rugged version of our existing aluminium radiator guard.
Constructed from 1mm stainless steel sheet allows the guard to be incredibly strong and impervious to rust – perfect for bikes and riders who may tackle demanding terrains and conditions.
The laser-cut grills are designed for maximum airflow to the radiator so that cooling isn't compromised; the Radiator Guard is as good looking as it is purposeful.
The CNC...
Available for the Aprilia RSV4 RR/RF '15-, Aprilia Tuono 1100 '15- and Aprilia RSV-4 1100 Factory ’19-, this R&G Titanium radiator guard is both lightweight and super strong, thanks to its real Titanium (ASTM B265 Grade 1) mesh construction, encased in a seamless aluminium frame.
This specific R&G radiator guard is made from an expanded ASTM B265 Grade 1 Titanium sheet and features a neat, seamless aluminium frame, securely holding the guard in place (utilising existing mounting or brac...
Suitable for the right hand side clutch motor casing of the Aprilia RSV4 RF/RR models (2015 onwards).
R&G Engine Case Covers have been developed in collaboration with selected race teams and crash tested within the R&G Racing Suzuki GSX-R Trophy. Crafted from 4mm polypropylene for strength, durability and good looks, they complement our crash protectors perfectly.
Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike Sch...
This specific Race Series Engine Case Cover is compatible with the Aprilia RSV4 RF/RR ('15-) models protecting the Right Hand Side Engine Casing from damage in the event of a crash, drop or slide.
R&G Race Series Engine Case Covers have been specifically developed in collaboration with selected high level race teams and crash tested in BSB level racing events to ensure they meet and exceed all required standards for case protection.
In addition to the existing R&G Engine Case C...
Aprilia RSV4 Factory and RSV4-R Left Hand Side Engine Case Cover.
Made in the U.K.
Extensively used around the world by thousands of road riders, track day enthusiasts, the California Superbike School (USA) and the Chris Walker Race School (UK). R&G’s entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the MotoAmerica Series for use in any competition sanctioned by these Organisations. T...
This specific Race Series Engine Case Cover is compatible with the Aprilia Tuono V4 (1000/1100) models and Aprilia RSV4 models (All years), protecting the Left Hand Side Casing from damage in the event of a crash, slide or drop.
R&G Race Series Engine Case Covers have been specifically developed in collaboration with selected high level race teams and crash tested in BSB level racing events to ensure they meet and exceed all required standards for case protection.
In addition t...
This specific Engine Case Cover is compatible with the Aprilia Tuono V4 (1000/1100) models and Aprilia RSV4 models (All years), protecting the Left Hand Side Casing from damage in the event of a crash, slide or drop.
In addition to the existing R&G Engine Case Cover range comes R&G's *NEW* 2015-spec Race Series Engine Case Covers, specially developed at the request of race teams and riders alike. They include a replaceable puck or slider on the impact face, giving the case not only more...
Our industry leading engine case covers are now available in kit form containing all the race series engine case covers R&G offer for your bike in one go. Developed on track and brought to the road our engine case covers are made from 4mm polypropylene for strength, durability and good looks, they complement our other crash protection perfectly and come approved by the California Superbike School (www.superbikeschool.co.uk).Suitable for the Aprilia RSV4-RR and RSV4-RF '15-
This k...
Our industry leading engine case covers are now available in kit form containing all the engine case covers R&G offer for your bike in one go. Developed on track and brought to the road our engine case covers are made from 4mm polypropylene for strength, durability and good looks, they complement our other crash protection perfectly and come approved by the California Superbike School (www.superbikeschool.co.uk).
Suitable for the Aprilia RSV4 RR and RSV4 RF 2015 (onwards) models. ...
Suitable for the Aprilia RSV4 '09'-14 and Tuono V4 '11-.Our industry-leading Engine Case Covers are now available in kit form containing all the covers R&G offer for your bike in one go. Developed on track and brought to the road, R&G Engine Case Covers bring BSB and Moto America race series-approved levels of engine protection to your bike for complete peace of mind.
Made in the U.K.
These bar end protectors have been specially designed and developed for the Aprilia RSV4 RR /RF '15-, Aprilia RSV4 1100 '19-, Honda CRF1100L ATAS '19-,Benelli TNT 125 '17- & Ducati Panigale V2 '20-.
Helping to protect expensive levers and clip ons from damage in the event of a drop, crash or slide.
Easy to install, they simply screw into place taking only seconds.
This Kaoko Throttle Stabilizer kit is designed to fit the Aprilia RSV4R '09-'15, Aprilia RSV4 1100 Factory '19-, Benelli TNT 125 '17- and Ducati Panigale V2 ’20- models.
It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand.
Awarded RiDE magazine Best buy award status.
R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.
Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and scooters). In only 2 minutes the grips heat up to 35°C (95°F) and on those r...
based on 1 review
R&G Premium Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.
All new Premium Features:
-Heat Setting Memory
-Auto Cut-Out
-Fully Waterproof
-New Grip Design
Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and...
Improve your vision, confidence and safety all year round while you ride!
This ground-breaking product enables you to WASH your visor while on the bike.
Unique wash/wipe action that’s incredibly easy to use: 1. Fill the tank with Visorcat wash (supplied). 2. Wash by moving Visorcat across your visor one way. 3. Wipe the residue away by moving Visorcat across your visor in the other direction. The result is 100% clear vision in all conditions. Keep the sponge clean by rinsing i...
R&G Second Skin stone chip protection film is a non-yellowing (UV Stable), ultra-tough, easy-to-apply, polyurethane protective film. Designed to protect your road or track motorcycle from stone chips, road salt, tar, abrasions, fairing stress fractures and bodywork/fuel tank scratches from general use. The unique properties of our protection film enable it to disperse the impact energy of gravel and small stones, bouncing them off and leaving your bodywork untouched beneath.
Our all-new version R&G Brake Lever Guard kit has been specifically designed for the Aprilia RSV4 RF/RR '15-, Aprilia Tuono '06- and Ducati Panigale 959 '16- & Panigale V2 ’20- models.
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, MotoAmerica) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with...
This Carbon Fibre Lever Guard kit has been specifically designed for the Aprilia RSV4 RF/RR '15-, Aprilia Tuono '06- and Ducati Panigale 959 '16- and Panigale V2 ’20- models.
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike...
This Moulded Lever Guard kit has been specifically designed for the Aprilia RSV4 RF/RR '15-, Aprilia Tuono '06- and Ducati Panigale 959 '16- & Panigale V2 ’20- models.
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or eve...
These new style offset cotton reels are a cross between our traditional style cotton reels and our spindle sliders. Suitable for the Aprilia RSV4 '09- and Tuono V4 '11- onwards models.
R&G Cotton Reels mount directly into Swingarm. The product gives protection to the swingarm, rear disc and chain areas. Aswell as allowing the bike to be lifted on a paddock stand to perform maintenance and cleaning.
These fork protectors are suitable for the Aprilia RSV4 RF '15- and Aprilia Tuono V4 1100 '15-'16 models.
Easy to install, they help to eliminate damage to the front forks, fork bottoms and brake calipers during a crash or drop.
These swingarm protector kit is suitable for the Aprilia RSV4 and Aprilia Tuono V4 1000/1100 models.
This pair of protectors fits into the side of the swing arm and helps to protect the swingarm, rear calipers, discs and drive sprocket from damage in the event of a drop of crash.
Our Swingarm Guards are made from Carbon fibre reinforced with DuPont™ Kevlar®. Not only do they look great, but they also offer protection to a very expensive part to replace! Specially moulded to fit perfectly onto the swingarm, they are designed to fit where the exhaust may come into contact with the swingarm in the event of a drop or crash.
Application takes only minutes and they could save you having to replace your swingarm which can get dented or scratched in the event of a cras...
This 4-piece Tank Traction Grip set has been specially designed for the Aprilia RSV4 '09- and Tuono V4 '11-.
R&G Tank Traction Pad kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Pad texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and ...
This 5pcs Boot Guard kit has been specially designed for the Aprilia RSV4 (all models) '09- and the Aprilia Tuono V4 '11- models, protecting the swingarm from unwanted scuffs and marks.
R&G Boot Guard kits are available for a large range of bike styles and brands, with new applications released regularly. The unique R&G Boot Guard texture was specifically designed to be durable, providing the rider with a buffer between his boot on the exposed areas of the swingarm which can (on occasio...
Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.
Patent No: GB2459728
This Tank Slider (pair) kit is compatible with the Aprilia RSV4 RF/RR '15- and Aprilia Tuono V4 1100 '15- models.
As used by the California Superbike School. (http://www.superbikeschool.com/)
Our Tank Sliders are made from Carbon fibre reinforced with DuPont™ Kevlar®, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tank, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a cr...
Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.
A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.
Suitable for Suzuki GSX-R600 L1 (2011-), Suzuk...
Tidy up the rear of your bike, once you have removed the rear footrest pillion hangers, fill the void left behind and cover those exposed holes in the subframe with this pair of blanking plate (LHS).
Suitable for the Aprilia RSV4 (all models) '09-, Tuono V4 (all models) '11- & RS660 '21-.
These blanking plates simply screws in, covering those otherwise exposed subframe holes left once the rear footrests have been removed keeping them free from of dirt and debris buildup ...
Tidy up the rear of your bike, once you have removed the rear footrest pillion hangers, fill the void left behind and cover those exposed holes in the subframe with this pair of blanking plates.
Suitable for the Aprilia RSV4 (all models) '09-, Tuono V4 (all models) '11- & RS660 '21-.
These blanking plates simply screws in, covering those otherwise exposed subframe holes left once the rear footrests have been removed keeping them free from of dirt and debris buildup protec...
This particular model fits the Aprilia RSV4RF / RSV4RR '15- models. Please note this does not fit the USA/Canadian models
Never forget your sidestand puck again!
Kickstand Shoes bolt onto the bottom of the sidestand, to enlarge the original’s footprint by up to 100%, significantly spreading the load placed upon it, to help prevent the stand ‘piercing’ the ground. Despite this enlargement, the Shoe does not affect ground clearance or interfere with the chain run during normal r...
R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.
If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors.
In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0002 (see related products below) - in some cases more than one resister must be used inline.
Supplied as a pair
The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators.
Please check the existing Indicator Relay for the number of pins on your connector before ordering - if you are still unsure please ask your local dealer.
The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators.
Please check the existing Indicator Relay for the number of pins on your connector before ordering - if you are still unsure please ask your local dealer.
R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of our iconic Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs, they come with clear lenses and illuminate on the side for additional visibility.
Available in two colour options: Black or Silver.
Can be used on the front or rear of the bike.
If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors. ...
This frame insert is suitable for the Caponord 1200 '13- and Aprilia V4 Tuono (2011 onward) and fit both the left and right hand sides of the bike (2 units required), covering and protecting the the holes in the frame from damage and debris buildup.
Lose your mirrors for that rebellious look or simply to stop your fairings flapping whilst on track days or racing!
This product is suitable for the Aprilia RS4 125 '11-, RSV4-RF, RSV4-RR '15- & RS660 '21- models.
R&G Chain Cleaner quickly removes all containments from your chain. Our formula breaks down even the toughest grime for easy, stress-free cleaning. For added cleaning power, consider using a brush to agitate contaminants before rinsing.
R&G Motorcycle Degreaser effectively removes built-up grime from your machine. Safe to use on metal, plastic and rubber, our specialised formula will cut through even the toughest grime, leaving a clean, 'like-new' finish. For added cleaning power, consider using a brush to agitate contaminants before rinsing.
R&G Disk Brake Cleaner can improve overall braking performance while prolonging the life of you brake discs and pads. Our formula is specially designed to remove brake dust, oil and any other contaminants that may affect braking performance.
Filter Results