Shop By BikeSetting the standard in crash protection and bolt-on motorcycle accessories.
You're viewing All Products for Yamaha - T-Max 530
Showing 1-50 of 111 results
Tidy up your rear end of your T-Max (2017-2019) with this R&G Tail Tidy/Licence Plate Holder.
Made from Stainless steel for strength and powder coated black for great looks and durability. Our tail tidy units are easy to fit and transform the rear of the bike.
This model is suitable for the Yamaha T-Max '17- models.
Tidy up your bike's rear end with this R&G Tail Tidy/Licence Plate Holder for the Yamaha T-Max 530 ('12-'16).
Made from Aluminium for weight saving and strength, powder coated black for durability. Transform the back end of your bike with an R&G tail tidy.
Compatible with both OEM and R&G micro indicators.
Universal Licence plate adapters to suit different number plates hole widths, once installed enable a certain amount of flexibility when fitting the a number plate, replacing the need to redrill your number plate.
Available in a one size fits all.
Supplied in pairs.
NO TAIL TIDY BRACKET IS SUPPLIED WITH THIS KIT
Available in a 16"x 12" sheet, this R&G Titanium universal mesh is both lightweight and super strong, thanks to its real Titanium (ASTM B265 Grade 1) mesh construction.
Made from the same high quality mesh found on in our Titanium radiator and oil cooler guards, it improves the looks of your bike and help to protect your expensive and vulnerable radiator and other components from flying road debris.
No permanent modifications need to be made to the bike.
Supplied with...
These bar end protectors are suitable for a range of Yamaha models. Click 'more info' to view more specific details.
Kaoko Throttle Stabilizer for the Yamaha TMAX 500 '10- and Yamaha 530 TMAX '12-.
Awarded RiDE magazine Best buy award status.
R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.
Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and scooters). In only 2 minutes the grips heat up to 35°C (95°F) and on those r...
based on 1 review
R&G Premium Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.
All new Premium Features:
-Heat Setting Memory
-Auto Cut-Out
-Fully Waterproof
-New Grip Design
Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and...
Eliminate that annoying spinning grip by getting a tube of grip glue. Holds grips firmly in place. Helps to reduce arm pump caused by trying to hold spinning grips in place.
Ideally suited to be used when installed R&G Heated Grips.
Improve your vision, confidence and safety all year round while you ride!
This ground-breaking product enables you to WASH your visor while on the bike.
Unique wash/wipe action that’s incredibly easy to use: 1. Fill the tank with Visorcat wash (supplied). 2. Wash by moving Visorcat across your visor one way. 3. Wipe the residue away by moving Visorcat across your visor in the other direction. The result is 100% clear vision in all conditions. Keep the sponge clean by rinsing i...
Our all-new version R&G Brake Lever Guard kit can be fitted to the brake side and has been specifically designed for the Yamaha T-Max 530 '17- & T-Max 560 '20- models.
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, MotoAmerica, FIM) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bi...
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filters; again potentially causing front brake engagement.
This Carbon Fibre Lever Guard kit has been specifically designed for the Yamaha T-Max 530 '17- & Yamaha TMAX 560 '20- models.
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to ...
This moulded Lever Guard kit can be fitted to either the brake or clutch sides and has been specifically designed for the Yamaha T-Max 530 '17- & Yamaha TMAX 560 '20- models and is available in a range of colour options.
Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake/clutch lever during close wheel to wheel rac...
R&G Offset Cotton Reels directly replace the OE chain adjusters on the rear swingarm, off-setting the cotton reel mounting point from installed directly into the swingarm, instead into a specially machined metal bracket. Offering the best of both worlds in terms of crash protection and functionality with the ability to use the R&G Offset Cotton Reels bobbins as paddock stand bobbins for tyre/chain maintenance as well as offering crash protection to the rear wheel components.
Specially d...
Easy to install, they help to eliminate damage to the front forks, fork bottoms and brake callipers during a crash or drop.
These fork protectors are suitable for the T-MAX 530 ’15-’19 / T-MAX 560 ’20- model.
These fork protectors are suitable for the Yamaha T-Max 500 ('08-'11) Scooter and Yamaha T-Max 530 '12-'14 and help to eliminate damage to the front forks during a drop.
These fork protectors are suitable for the Yamaha YZF-R6 '05-'16 & YZF-R1 '02-'14 *(not compatible with the YZF-R1 SP models)* and T-MAX 530 '15-'19.
These spindle sliders mount directly through the rear spindle axle of the Yamaha T-Max 530 '17 & TMAX 560 '20- providing both crash protection to the rear components, protecting the swingarm and components, like the brakes and drivetrain in the event of a crash or drop but also functioning as paddock stand bobbins, allowing the bike to be lifted up on a Rear Paddock Stand for cleaning and maintenance.
The best of both worlds!
This R&G Headlight Shield is specially designed to fit Yamaha T-Max 530 '17- & Yamaha TMAX 560 '20- models.
R&G Headlight shields are engineered for protection and style. Protecting your expensive headlights from debris kicked up from the road, our headlight shields are easy to fit, with no modification needed to your bike and they are easily removed for cleaning. R&G Headlight Shields are made from clear acrylic and specially designed to fit a range of bikes that's ever-growing.
R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.
If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors.
In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0002 (see related products below) - in some cases more than one resister must be used inline.
Supplied as a pair
The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators for the following manufacturers: Honda, Kawasaki & Yamaha.
Please check the existing Indicator Relay where possible before ordering - if you are still unsure please ask your local dealer.
R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of our iconic Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs, they come with clear lenses and illuminate on the side for additional visibility.
Available in two colour options: Black or Silver.
Can be used on the front or rear of the bike.
If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors. ...
Are your micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you will find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.
** Supplied as a pair **
These resistors are for the R&G Bulb Indicators. If you have R&G LED indicators, please use RGR0002
Lose your mirrors for that rebellious look or simply to stop your fairings flapping whilst on track days or racing!
Made from HDPE for a fantastic finish, these neat little blanking plates fit over the mounting point for the mirrors and can be fitted in seconds - (comes supplied with bolts for installation).
This product is suitable for the Yamaha T-Max 530 '12- & TMAX 560 '20-
These R&G Footboard Sliders have been specially developed to fit the Yamaha T-Max 530 ('12-) and come equipped with R&G board sliders made from the same high quality material as our main crash protection bobbins.
They mounted directly onto an R&G treadplate designed to reduce damage to the bike in the event of a drop or slide down the road.
The product also comes with yellow side stickers for enhanced visibility.
This product mounts through the existing footplate ru...
These R&G Footboard Sliders have been specially developed to fit the Yamaha T-Max 530 '17-'19 models.
This kit comes with 2 tread plates, one for each side and 2 rubber sliders, the rubber sliders mount directly onto the tread plate to reduce damage in the event of a drop or slide.
The product also comes with yellow side stickers for enhanced visibility.
This product mounts using existing holes in the footboards so no modification is required to install.
R&...
R&G Motorcycle Degreaser effectively removes built-up grime from your machine. Safe to use on metal, plastic and rubber, our specialised formula will cut through even the toughest grime, leaving a clean, 'like-new' finish. For added cleaning power, consider using a brush to agitate contaminants before rinsing.
R&G Disk Brake Cleaner can improve overall braking performance while prolonging the life of you brake discs and pads. Our formula is specially designed to remove brake dust, oil and any other contaminants that may affect braking performance.
R&G Silicone Shine leaves your machine looking as good as it did right from the factory. Our formula guarantees a deep, grime resistant shine.
R&G Helmet Fresh completely eradicates all odour from inside your helmet, leaving a fresh 'new helmet scent' every time! Our fast-drying formula will leave your helmet fresh and bacteria-free for those long rides. R&G Helmet Fresh is suitable for use on all fabrics. Why not try it on your gloves or clothing?
R&G Nano Bike Wash effortlessly breaks down and removes all dirt, grime and contaminants that may be on your machine after the hardest rides. Our specially-created formula biodegradable formula makes cleaning your machine a pleasure and leaves it looking its best!
R&G Nano Bike Wash effortlessly breaks down and removes all dirt, grime and contaminants that may be on your machine after the hardest rides. Our specially-created formula biodegradable formula makes cleaning your machine a pleasure and leaves it looking its best!
R&G Waterlesss Bike Wash is the easiest way to remove light contaminants from your machine between major washes. Our special formula effortlessly cleans all surfaces - with no water necessary! It leaves a streak-free, non-sticky, high shine from just one application.
R&G Anti-fog Solution prevents your vision from being obscured while on the go! Our formula creates a super-thin, transparent nanolayer to prevent your visor, goggles and eyewear from fogging up.
R&G Helmet & Visor Cleaner quickly removes all contaminants from helmets, visors and eyewear, Our specially-created PH-neutral formula is safe to use on all helmets and is fully biodegradable.
R&G Wet Chain Lube provides the ultimate protection for your chain in the harshest conditions imaginable. Our super sticky formula penetrates deep into the chain links offering extreme lubrication no matter how wet the ride. For easy removal after your ride, use R&G Nano Bike Wash and Chain Cleaner.
The R&G Adventure Outdoor Cover fits on adventure and touring sized bikes and has been redesigned to include many new features. Based off our original award winning Superbike Cover design and made of the same quality waterproof material, the cover also features elasticated rim and Belly straps as standard ensure the cover stays fixed in place and stops wind, mud or water getting up inside the cover and ensure a tight fit around the base. Front and rear chain loops for security devices covered by...
The wireless system does not need any programming and features a compact LCD screen which fits into a magnetic mount placed on a prominent part of the bike. The fully sealed and buttonless device can be easily removed for security when parking unattended and is small enough to fit in a pocket.
16-Piece Modular Motorcycle Rim TapeRIMTAPE0001BLUE, RIMTAPE0001DKBLUE, RIMTAPE0001GR, RIMTAPE0001OR, RIMTAPE0001RE, RIMTAPE0001WH, RIMTAPE0001YE
R&G Rim Tape is designed specifically for 17" motorcycle wheels. Using only the highest-quality material available R&G's Rim Tape is designed to give years of service!
Available, in a large range of colours and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel w...
Keep your clutch reservoir protected with our handy Clutch Reservoir Protector (Booty)!
Now available in Black with White logo or Orange with Black logo!
Take care of your helmet with our R&G Racing Deluxe Helmet Bag!Made from a tough, hard-wearing outer and fleece lining, this universal helmet bag protects against dust and light knocks.
Our revolutionary tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike. ** Part does not include Ratchet Straps ** R&G Racing Handlebar Top Straps ST0001BL R&G Racing Handlebar Top Straps, 25mm Ratchet Straps, RG, R&G Racing, bike parts, motorbike supplies
R&G Ratchet straps are easy to use due to a one-handed fastening/quick-release mechanism. It makes tightening and loosening the strap a cinch, which is great for those times when you just need to get the job done!
Individual ratchet strap length: 72" (180cm) ** Part does not include top-strap ** 25mm Ratchet Straps ST0699 25mm Ratchet Straps ST0699
For top-strap please see: ST0001BL
R&G Racing Umbrella in silver and black with R&G Logo.
Our Visor Pouch/Protector is compatible with all major brand visors. Ideal for carrying a spare clear visor for when it gets dark or vice versa. Equipped with a high-quality fastex buckle and belt (expandable up to 48 inches) and features a fleece-lined interior to keep your visor in best condition - coupled with a large Velcro closing tab, making the visor easy to get out when needed and ensuring it stays safe and secure when not.
Comes with reflective "R&G" logo and text to help ...
New for 2013 comes our universal mesh flat sheets (sized 16" x 12") available in black, titanium or green finishes to fit almost any radiator size or fill any fairing opening on your bike.
Made from the same high quality mesh found on in our Radiator Guard range, it improves the looks of your bike and help to protect your expensive and vulnerable radiator and other components from flying road debris.
No permanent modifications need to be made to the bike.
Supplied w...
Give your visor that racing look as used by many R&G supported riders in BSB and around the world.
Supplied as a pair.
R&G Heat Shield has been specifically designed to protect components from the damaging effects of radiant heat. It features a composite construction of aluminium foil, silicone adhesive, glass cloth and flame resistant polyurethane, optimising barrier performance up to 500 degrees C, with minimal weight and material thickness. Presented in a self-adhesive format making it simple to install.
It has a higher than average 20mu aluminium foil face making it extremely durable and resilient e...
The all-new R&G transparent PPE face shield can effectively block harmful substances to protect your entire face.
Filter Results