Your bike. Your rules. Your safety.
The HEX ezCAN plugs directly into your bike, listening to and obeying commands received through the bike’s CAN-bus data flow. It is a highly-configurable, seamless plug-and-play solution that lets you add any electronic accessory to your bike without the need to cut any wires, or void the bike’s warranty. ezCAN lets you power and configure your accessories with complete safely – and operate the installed accessories using your bike’s existing controls.
The HEX ezCAN PURE lets you power and operate connected accessories. but with an extra helping of unlimited possibility!
Model-specific HEX ezCANs listen for proprietary CAN-bus control inputs only, while the HEX ezCAN PURE listens for electrical On/Off control inputs, making it compatible with most 12-volt motorcycles, cars, SUVs, pickups, 4x4s, agricultural vehicles, and more.
Additional ezBUS Low-Power Output (JWPF Connector)
The HEX ezCAN PURE Universal Accessory Manager also features an extra low-power ezBUS circuit connection via a JWPF connector. When the white circuit is configured as an ezBUS-Ready accessory in the HEX ezCAN configuration software, riders can connect ezBUS-Ready accessories to the white circuit and connect an additional low-power ezBUS accessory to the dedicated JWPF output—such as an ezSWITCH.
Key features:
- One device manages everything.
- Integrated control, with no need for added buttons or switches.
- Allows addition of extra safety features.
- Preserves the motorcycle’s factory warranty.
- Plugs directly into CAN-bus, saving installation time and wiring complexity.
- Fits unobtrusively and is easily hidden.
- Easy software configuration through USB, using a Mac or a Windows PC.
- Four separate, electronically-fused power circuits.
- Waterproof and dust-proof.
With an ezCAN, you can power and operate almost any electronic accessory installed on your bike, including:
- Auxiliary front lights
- A SoundBomb, or other auxiliary horn
- Auxiliary brake lights
- Illuminated badge emblems
- Extra turn signals
- Heated gear
- Auxiliary power for Satnav/GPS devices, tablet PCs, smartphones, and similar devices
- Onboard cameras
- And many others.
Many accessory manufacturers design their products to work seamlessly with the HEX ezCAN, making installation a true plug-and-play experience. But don’t worry if your accessory doesn’t come with HEX ezCAN connectors— Your ezCAN kit includes a set of four connectors, letting you power any two- or three-wire accessory with ease.
No hassle, no complicated wiring. Just connect and ride!
HEX ezCANs purchased from R&G come with R&G Direct Elite Cover - giving you 5-year extended warranty from the date the device is registered. The warranty is valid only if the device has been registered using the ezCAN configuration software, and the device and its wiring have not been tampered with.
ezBUS = Smart technology control.
All Generation II HEX ezCAN devices support ezBUS — a new way to connect smart accessories through a simple plug-and-play system.
With ezBUS, installation is easier than ever, and you’re no longer limited to just four power outputs; you can expand your setup effortlessly!
Look for accessories that carry the Certified – HEX ezBUS Ready logo below. Accessories carrying this logo are officially licenced to use the HEX ezBUS firmware protocol. This protocol is built to standards that ensure your chosen accessories work smoothly, reliably, and seamlessly.
Included in the box:
- 1x HEX ezCAN PURE Device
- 1x HEX ezCAN Generic Signal Input Harness (input cables for ignition, high beam, horn, brake, and left & right turn signal)
- 4x 15mm length adhesive heat shrink (6.4 mm ?)
- 1x 40mm length adhesive heat shrink (9.5 mm ?)
- 1x 1.4m length of automotive braid (4mm ?)
- 1x 1.4m length of automotive braid (6mm ?)
- 6 x Posi-tap
- 1x USB C Cable
- 4x 2-wire stub connectors (Black/Orange)
- 4x 1-wire terminal wires (Orange)
- 4x Blanking seals
- 3x Blanking Plugs
- 20x Cable Ties
Please click here for the installaiton guide.