Shop By BikeSetting the standard in crash protection and bolt-on motorcycle accessories.

This 5-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go through a PVD (physical vapour deposition) treatment, ensuring longevity and corrosion resistance.

• Only use Manufacturer torque settings, between 33 - 45nm.
• Kits are offered as bike-specific fitments. If you have a variation of a standard model you may require an alternative kit. ...

R&G Aero Crash Protectors feature our stylish, aerodynamic Aero Bobbins and are available in Black or White options. Suitable for the Honda NC700/750S(DCT) ’12- & NC700/750X(DCT) ’12- models.

R&G Crash Protectors offer core motorcycle protection, keeping the frame, engine and other critical components off the ground in the event of a crash, drop or slide.

Tidy up your rear end with this R&G Tail Tidy/Licence Plate Holder!Suitable for the Honda NC700X/S/DCT, the Honda NC750X model and Honda Integra 700/750 models up to 2015 only..

Can be fitted with OEM indicators, (as pictured) or our own aftermarket micro/mini indicators (RG370) - please see related products for more details.

Universal Licence plate adapters to suit different number plates hole widths, once installed enable a certain amount of flexibility when fitting the a number plate, replacing the need to redrill your number plate.

Available in a one size fits all.

Supplied in pairs.

NO TAIL TIDY BRACKET IS SUPPLIED WITH THIS KIT

Available in black finish to fit the Honda NC700X/S/DCT models, the Honda NC750X model and Honda Integra 700/750 models. They are made from pressed aluminium and feature a neat, seamless frame (where applicable). They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris.No permanent modifications need to be made to the bike.

Available in a 16"x 12" sheet, this R&G Titanium universal mesh is both lightweight and super strong, thanks to its real Titanium (ASTM B265 Grade 1) mesh construction.

Made from the same high quality mesh found on in our Titanium radiator and oil cooler guards, it improves the looks of your bike and help to protect your expensive and vulnerable radiator and other components from flying road debris.

No permanent modifications need to be made to the bike.

Supplied with...

This Engine Case Cover (Left Hand Side) is suitable for the Honda NC700X and NC700S ('12- model).

Made in the U.K.

Compatible with both Manual and DCT (auto models).

These exciting new Engine Case Covers have been developed in collaboration with selected race teams and crash tested within the R&G Racing Suzuki GSX-R Trophy. Crafted from 4mm polypropylene for strength, durability and good looks, they complement our crash protectors perfectly.

The covers simply ...

This Engine Case Cover (Right Hand Side) is suitable for the Honda NC700X/S (Manual Only) & NC750X '14- Models.

Made in the U.K.

Compatible only with Manual bike, NOT DCT (automatic) version.

These exciting new Engine Case Covers have been developed in collaboration with selected race teams and crash tested within the R&G Racing Suzuki GSX-R Trophy. Crafted from 4mm polypropylene for strength, durability and good looks, they complement our crash protectors perfectly. <...

Suitable for the Honda NC700S and NC700X (2012 onwards) - Compatible with the MANUAL version ONLY; not DCT version.

Made in the U.K.

Our industry-leading Engine Case Covers are now available in kit form containing all the covers R&G offer for your bike in one go. Developed on track and brought to the road, R&G Engine Case Covers bring BSB and Moto America race series-approved levels of engine protection to your bike for complete peace of mind.

Extensively used around t...

These bar end protectors have been specially developed and shaped to suit the looks and needs of the Honda NC700X/S/DCT/NT700V/NC750X '12-, Honda CB100R(+) '18- and Honda Integra 700/750, Models.

Helping to protect those expensive levers and clipons from damage in the event of a drop or crash.

Kaoko Throttle Stabilizer for Honda NC700X and NC700 series models (2012-), Integra Scooter (2012-), CBR500R (2013-), NC750 (2013-), CB500X/F (2013-), CB1100F (2013-), CBR300F/R (2013-).CB1000R(+) '18-, CBR650R '19-, CB650R '19-

Kaoko Throttle Stabilizer for Honda VFR1200X/XD (2012-) & NC700X (2012-) with Barkbusters BHG46.2NP handguards, XL1000V Varadero and XL600V / XL650V / XL700V Transalp with Barkbusters BHG31 or BHG46.2 hand guards; for SUZUKI DL1000 (-2011) and DL650 (-2011) V-Strom with Barkbusters BHG18 or BHG46.2 handguards (either with Barkbusters VPS or Storm plastics); for SUZUKI DL1000 (2012-) and DL650 (2012-) V-Strom with Barkbusters BHG46.2NP handguards (either with Barkbusters VPA or Storm plastics).

Awarded RiDE magazine Best buy award status.

R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.

Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and scooters). In only 2 minutes the grips heat up to 35°C (95°F) and on those r...

R&G Premium Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.

All new Premium Features:
-Heat Setting Memory
-Auto Cut-Out
-Fully Waterproof
-New Grip Design

Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and...

Improve your vision, confidence and safety all year round while you ride!

This ground-breaking product enables you to WASH your visor while on the bike.

Unique wash/wipe action that’s incredibly easy to use: 1. Fill the tank with Visorcat wash (supplied). 2. Wash by moving Visorcat across your visor one way. 3. Wipe the residue away by moving Visorcat across your visor in the other direction. The result is 100% clear vision in all conditions. Keep the sponge clean by rinsing i...

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wheel racing (either from accidental contact with another bike or even a rider) but can equally be applied to road riding, protecting your lever(s) from wing mirror strikes while filters; again potentially causing front brake engagement.

Are they cotton reels or spindle sliders? Well they are both really!!

The Cotton Reel is mounted to a special, black-anodised stainless steel bracket (included with the kit). The product will give protection to the swingarm area in most crashes. Also the bike can be lifted on the Cotton Reels, using a paddock stand with hooks (suggest R&G code SH0001). These cotton reels specifically designed to fit the Honda NC700X/S/DCT/ models, NC750X model and Honda Integra 700/750 models. Additio...

This R&G Tank Traction Grip kit has been specially designed for the Honda NC700X '12-'15 / NC750X '13-'15.

R&G Tank Traction Grip kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Traction Grip texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and b...

Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.

Patent No: GB2459728

This Round Exhaust Protector (Can Cover) will fit both left and right cans/exhausts. This protector is a similiar design to the oval supermoto exhaust protector but with a 100mm diameter.
Made in the U.K.

This R&G Headlight Shield is specially designed to fit HONDA NC700S/X '12-, NC750S/X '14- models.

R&G Headlight shields are engineered for protection and style. Protecting your expensive headlights from debris kicked up from the road, our headlight shields are easy to fit, with no modification needed to your bike and they are easily removed for cleaning. R&G Headlight Shields are made from clear acrylic and specially designed to fit a range of bikes that's ever growing.

R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors.

In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0002 (see related products below) - in some cases more than one resister must be used inline.

Supplied as a pair

The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators for the following manufacturers: Honda, Kawasaki & Yamaha.

Please check the existing Indicator Relay where possible before ordering - if you are still unsure please ask your local dealer.

R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of our iconic Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs, they come with clear lenses and illuminate on the side for additional visibility.

Available in two colour options: Black or Silver.

Can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors. ...

Are your led micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you may find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.Note: We highly recommend buying this product when purchasing LED micro / mini indicators in order to save any disappointment when fitting.

NO wire cutting or soldering is required, these resistors fit inline.

** Supplied as a pair ** <...

Are your micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you will find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.

** Supplied as a pair **


These resistors are for the R&G Bulb Indicators. If you have R&G LED indicators, please use RGR0002

R&G Chain Cleaner quickly removes all containments from your chain. Our formula breaks down even the toughest grime for easy,  stress-free cleaning. For added cleaning power, consider using a brush to agitate contaminants before rinsing. 

R&G Motorcycle Degreaser effectively removes built-up grime from your machine. Safe to use on metal, plastic and rubber, our specialised formula will cut through even the toughest grime, leaving a clean, 'like-new' finish. For added cleaning power, consider using a brush to agitate contaminants before rinsing. 

R&G Disk Brake Cleaner can improve overall braking performance while prolonging the life of you brake discs and pads. Our formula is specially designed to remove brake dust, oil and any other contaminants that may affect braking performance. 

R&G Silicone Shine leaves your machine looking as good as it did right from the factory. Our formula guarantees a deep, grime resistant shine. 

R&G Helmet Fresh completely eradicates all odour from inside your helmet, leaving a fresh 'new helmet scent' every time! Our fast-drying formula will leave your helmet fresh and bacteria-free for those long rides. R&G Helmet Fresh is suitable for use on all fabrics. Why not try it on your gloves or clothing? 

R&G Nano Bike Wash effortlessly breaks down and removes all dirt, grime and contaminants that may be on your machine after the hardest rides. Our specially-created formula biodegradable formula makes cleaning your machine a pleasure and leaves it looking its best!

R&G Nano Bike Wash effortlessly breaks down and removes all dirt, grime and contaminants that may be on your machine after the hardest rides. Our specially-created formula biodegradable formula makes cleaning your machine a pleasure and leaves it looking its best!

R&G Waterlesss Bike Wash is the easiest way to remove light contaminants from your machine between major washes. Our special formula effortlessly cleans all surfaces - with no water necessary! It leaves a streak-free, non-sticky, high shine from just one application. 

R&G Anti-fog Solution prevents your vision from being obscured while on the go! Our formula creates a super-thin, transparent nanolayer to prevent your visor, goggles and eyewear from fogging up. 

R&G Helmet & Visor Cleaner quickly removes all contaminants from helmets, visors and eyewear, Our specially-created PH-neutral formula is safe to use on all helmets and is fully biodegradable. 

R&G Everyday Chain Lube offers maximum protection for your chain over long distances, in all weathers. Our formula penetrates deep into the chain links, offering extreme lubrication with no fling. Suitable for both road and off-road use. for easy removal, after you ride, use R&G Nano Bike Wash and Chain Cleaner. 

R&G Dry Chain Lube provides the ultimate protection for your chain in dry and dusty conditions. Our wax-based formula ensures maximum lubrication while not attracting dirt and grit for a clean ride. For easy removal after your ride, use R&G Nano Bike Wash and Chain Cleaner. 

R&G Wet Chain Lube provides the ultimate protection for your chain in the harshest conditions imaginable. Our super sticky formula penetrates deep into the chain links offering extreme lubrication no matter how wet the ride. For easy removal after your ride, use R&G Nano Bike Wash and Chain Cleaner. 

These anodised aluminium paddock stand bobbins are sized M8 and are suitable for most Ducati, Honda, Suzuki, Triumph and Kawasaki models.

Designed to work perfectly with our Elevation series Rear Paddock Stands and are easy to locate onto a stand thanks to their enlarged collar design.

Supplied in pairs and available in 3 colour options.

Please carefully check your bike to ensure the Paddock Stand/Cotton Reel mounts are the correct size before purchasing.

These covers are breathable, soft and elasticated. They can also be spun dry.

Ideal for keeping your pride and joy spotlessly clean over the winter or when put back into indoor after cleaning!

Made from a high quality breathable material that allows the air to constantly travel through.

Available in Black with Silver logo and piping or Red with White logo/piping.

The R&G Adventure Outdoor Cover fits on adventure and touring sized bikes and has been redesigned to include many new features. Based off our original award winning Superbike Cover design and made of the same quality waterproof material, the cover also features elasticated rim and Belly straps as standard ensure the cover stays fixed in place and stops wind, mud or water getting up inside the cover and ensure a tight fit around the base. Front and rear chain loops for security devices covered by...

The wireless system does not need any programming and features a compact LCD screen which fits into a magnetic mount placed on a prominent part of the bike. The fully sealed and buttonless device can be easily removed for security when parking unattended and is small enough to fit in a pocket.

R&G Rim Tape is designed specifically for 17" motorcycle wheels. Using only the highest-quality material available R&G's Rim Tape is designed to give years of service!

Available, in a large range of colours and thanks to its 4-piece (per wheel side, 16 in total) modular design, there's a set of Rim Tape for everyone no matter what colour/style your bike is! Allowing the rider to use 2,3 or 4 pieces per wheel side. R&G Rim Tape is designed to easily install on any 17" motorcycle wheel w...

At home on any motorcycle from sportsbikes to cruisers, the R&G Modular Centre Tank Pad helps protect the fuel tank on your motorcycle from scratches and unwanted marks from zippers/buckles and general wear and tear with our newly developed 3 piece modular tank pad.

Please note: R&G Tank Traction Grips grips shown on the sides of the tank ARE NOT included but are available separately.

Keep your clutch reservoir protected with our handy Clutch Reservoir Protector (Booty)!

Now available in Black with White logo or Orange with Black logo!

Take care of your helmet with our R&G Racing Deluxe Helmet Bag!Made from a tough, hard-wearing outer and fleece lining, this universal helmet bag protects against dust and light knocks.

R&G Heat Shield has been specifically designed to protect components from the damaging effects of radiant heat. It features a composite construction of aluminium foil, silicone adhesive, glass cloth and flame resistant polyurethane, optimising barrier performance up to 500 degrees C, with minimal weight and material thickness. Presented in a self-adhesive format making it simple to install.

It has a higher than average 20mu aluminium foil face making it extremely durable and resilient e...

Protect your fuel tank from scratches and unwanted marks from zippers/buckles and general wear and tear with our traditional style tank pad.

Available in Black.

New for 2013 comes our universal mesh flat sheets (sized 16" x 12") available in black, titanium or green finishes to fit almost any radiator size or fill any fairing opening on your bike.

Made from the same high quality mesh found on in our Radiator Guard range, it improves the looks of your bike and help to protect your expensive and vulnerable radiator and other components from flying road debris.

No permanent modifications need to be made to the bike.

Supplied w...