http://www.rg-racing.com/browseType/General_Accessories.aspxen-gbCopyright: (C) R&G Racing, see http://www.rg-racing.com for further informationSKU: GG0001
Eliminate that annoying spinning grip by getting a tube of grip glue. Holds grips firmly in place. Helps to reduce arm pump caused by trying to hold spinning grips in place. Ideally suited to be used when installed R&G Heated Grips.

Click here to view this product

]]>GG0001http://www.rg-racing.com/browseType/General_Accessories/GG0001.aspxSKU: HS0001RE
High quality holesaw, suitable for modifying your fairing to take the R&G Crash protector kits that require 28mm holes drilled.

Click here to view this product

]]>HS0001REhttp://www.rg-racing.com/browseType/General_Accessories/HS0001RE.aspxSKU: AKS0001
Our Aero Knee Sliders are heavily used all over the world, seen on the best riders, roads and tracks of the planet. They are extensively used by many riders in the British Superbike Championship (amongst others) and race schools worldwide. Developed with the feedback of racers and road riders alike, many asking for a knee sliders to give them better feel and confidence when leant over. we made our latest generation Aero Knee Sliders, made from a special blend of composite materials to ensure the riders gets the best feedback available. Attaching to your suit via velcro. Available in Black or White.

Click here to view this product

]]>AKS0001http://www.rg-racing.com/browseType/General_Accessories/AKS0001.aspxSKU: CRP001
Keep your clutch reservoir protected with our handy Clutch Reservoir Protector (Booty)!

Click here to view this product

]]>CRP001http://www.rg-racing.com/browseType/General_Accessories/CRP001.aspxSKU: HG000122C
Awarded RiDE magazine Best buy award for 2011. R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs - heating upto 35°C in only two minutes and max out at 60°C depending on heat setting.

Click here to view this product

]]>HG000122Chttp://www.rg-racing.com/browseType/General_Accessories/HG000122C.aspxSKU: HGATV1
Heated grips add months to your offroad riding or urban quad riding seasons and add comfort to almost any ride. Specially developed for Quad bikes with thumb throttles these heated grips come from our award winning range of motorcycle heated grips developed to the same exacting standards and high quality finish with easy to install and robust electronics along with 5 different heat settings controlable at the touch on one bottom for no hassle operation. Heat upto 35°C in only 2 minutes and then upto 60°C depending on heat setting selected.

Click here to view this product

]]>HGATV1http://www.rg-racing.com/browseType/General_Accessories/HGATV1.aspxSKU: REFL1
Self adhesive Red Reflector; ideal for numberplates Supplied in singles only

Click here to view this product

]]>REFL1http://www.rg-racing.com/browseType/General_Accessories/REFL1.aspxSKU: SH0002
These paddock stand hooks fit rear stands made by Harris and are designed to be used in conjuntion with our R&G paddock stand bobbins and cotton reels.

Click here to view this product

]]>SH0002http://www.rg-racing.com/browseType/General_Accessories/SH0002.aspxSKU: SH0001
These hooks fit the Micron, Champion and Scorpion stands. The diameter of the bar is 12mm.

Click here to view this product

]]>SH0001http://www.rg-racing.com/browseType/General_Accessories/SH0001.aspxSKU: RADUM01BK
New for 2013 comes our universal mesh flat sheets (sized 16" x 12") available in black to fit almost any radiator size or fill any fairing opening on your bike. Made from the same high quality mesh found on in our Radiator Guard range, it improves the looks of your bike and help to protect your expensive and vulnerable radiator and other components from flying road debris. No permanent modifications need to be made to the bike. Picture is for illustration purposes only. Supplied with zipties to aid with installation.

Click here to view this product

]]>RADUM01BKhttp://www.rg-racing.com/browseType/General_Accessories/RADUM01BK.aspxSKU: REFL2
Bolt on rectangular red reflector; ideal for numberplates Supplied in singles only

Click here to view this product

]]>REFL2http://www.rg-racing.com/browseType/General_Accessories/REFL2.aspxSKU: REK0002BK
New to R&G Racing developed specifically to suit our tail tidy range comes our "Reflector Extender" kits. With a large (30mm x 85mm) (E) Marked reflector this kit allows the easy installation of a reflector onto our tail tidies simply screwing into tail

Click here to view this product

]]>REK0002BKhttp://www.rg-racing.com/browseType/General_Accessories/REK0002BK.aspxSKU: REK0001BK
New to R&G Racing developed specifically to suit our tail tidy range comes our "Reflector Extender" kits. With a large (30mm x 85mm) (E) Marked reflector this kit allows the easy installation of a reflector onto our tail tidies simply screwing into tail

Click here to view this product

]]>REK0001BKhttp://www.rg-racing.com/browseType/General_Accessories/REK0001BK.aspxSKU: ST0001BL
Our revolutionary tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike. ** Part does not include Ratchet Straps ** R&G Racing Handlebar Top Straps ST0001BL R&G Racing Handlebar Top Straps, 25mm Ratchet Straps, RG, R&G Racing, bike parts, motorbike supplies

Click here to view this product

]]>ST0001BLhttp://www.rg-racing.com/browseType/General_Accessories/ST0001BL.aspxSKU: ST0699
Our revolutionary 25mm tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike. Individual ratchet strap length: 72" (180cm) ** Part does not include top-strap ** 25mm Ratchet Straps ST0699 25mm Ratchet Straps ST0699

Click here to view this product

]]>ST0699http://www.rg-racing.com/browseType/General_Accessories/ST0699.aspxSKU: TKPAD1BK
Protect your fuel tank from scratches and unwanted marks from zippers/buckles and general wear and tear with our newly developed traditional style tank pad. Available in Black.

Click here to view this product

]]>TKPAD1BKhttp://www.rg-racing.com/browseType/General_Accessories/TKPAD1BK.aspxSKU: VISORPOUCH
New for 2012 comes our Visor Pouch/Protector, compatible with all major brand visors. Ideal for carrying a spare clear visor for when it gets dark or vice versa. Equipped with a high-quality fastex buckle and belt (expandable up to 48 inches) and features a fleece-lined interior to keep your visor in best condition - coupled with a large Velcro closing tab, making the visor easy to get out when needed and ensuring it stays safe and secure when not. Comes with reflective "R&G" logo and text to help aid visibility. Available only in Black.(Visor not included!)

Click here to view this product

]]>VISORPOUCHhttp://www.rg-racing.com/browseType/General_Accessories/VISORPOUCH.aspxSKU: VS0001
Give your visor that racing look as used by many R&G supported riders in BSB and around the world. Supplied as a pair.

Click here to view this product

]]>VS0001http://www.rg-racing.com/browseType/General_Accessories/VS0001.aspx