Click rgracing.co.uk/ for Sponsors of Global Motor-Sports.

  CBR1000RR / 600RR (all years)

 

FITTING INSTRUCTIONS FOR R&G LICENCE PLATE HANGER

CBR600RR & CBR1000RR ’03-‘05 (part code LP0008BK)

 

·          Remove both seats

·          Remove the small panels to side of rider’s seat

·          Remove rear seat cowl

·          Disconnect wiring to original number plate unit

·          Undo the four bolts holding the original number plate unit to the subframe

·          Remove indicators from original unit and fit to R&G tail tidy (or use your new indicators)

·          Route indicator wiring through clips provided

·          Fit R&G tail tidy in place, using the four bolts previously removed (unit will pull to shape when tightened up)

·          Reconnect indicator wires, checking operation (n.b. right side indicator has the longer wire)

·          Using red connectors supplied, re-attach the number plate light (suggest cutting connectors from OEM unit and splicing to R&G unit)

·          The wire with the red end goes to the positive feed

·          Recheck that wires are not touching exhaust silencer

·          Reassemble panels, reversing removal procedure

·          Refit seats

·          Depending on local laws, attach enclosed red reflective tape in an appropriate location

·          Test the indicators and licence plate illuminator before riding
     
Consumer Insert

The catalogue description and any exhibition of samples are only broad indications of the Products and R & G may make design changes which do not diminish their performance or visual appeal and supplying them in such state shall conform to the order.
The Buyer acknowledges no representation or warranty (other than as to title) has been given or will apply to the Products other than those in R & G’s order or confirmation and the Buyer confirms it has chosen the Products as being of merchantable quality and suitable for its particular purposes.
Where R & G fits the Products or undertakes other services it shall exercise reasonable skill and care and rectify any fault free of charge unless the workmanship has been disturbed. The Buyer is responsible for ensuring that the warranty on the motorcycle is not affected by the fitting of the Products.
On return of any defective Products R & G shall at its option either supply a replacement or refund the purchase money but shall not be liable if the Products have been modified or used or maintained otherwise than in accordance with R & G’s or manufacturer’s instructions and good engineering practice or if the defect arises from accident or neglect.
Other than identified above and subject to R & G not limiting its liability for causing death and personal injury, it shall not be liable for indirect or consequential loss and otherwise its liability shall be limited to the amounts paid by the Buyer for the Products or the fitting or service concerned.
These terms do not affect the Buyer’s statutory rights.

R&G RACING RETURNS POLICY (NON-FAULTY GOODS)

Returns must be pre-authorised (if not pre-authorised the return will be rejected)
Goods may only be returned direct to us if they were purchased direct from us (customer must prove if necessary). Otherwise to be returned to original vendor.
Goods must be in re-sellable condition, in the opinion of R&G Racing
All returns are subject to a 25% restocking and handling fee (25% of the gross value exc. P&P – at the prevailing price at time of purchase)
The customer must pay any and all carriage charges
No returns of discontinued products, unless within 14 days of purchase
This policy does not affect your statutory rights and does not refer to faulty goods
 
 

<<Back

  
 

All crash protector and frame slider prices include VAT at 17.5%. Postage & Packaging is dependent on weight of total order

Key: S=Set P=Pair E=Each

/ Crash protectors and frame sliders /

Copyright R&G 2002