GSXR600/750K4 Remove rear seat Unplug the three wires on the left of the motorcycle (grey, white & black) Undo and remove the four screws in the middle of the undertray Carefully remove the hanger assembly, taking the wires through the holes Remove two screws from inside hanger assembly that secure licence plate illuminator Pull out the licence plate illuminator assembly (twist the bulb to remove the unit) Push the rubber backing plate out and remove along with the wire Take R&G unit and insert rubber backing plate and wire/bulb Take licence plate illuminator and re-insert bulb Place licence plate illuminator over rubber and replace screws Fit your choice of indicators (larger hole is for use with original indicators if required) Fit right hand indicator wire through middle right-hand hole in R&G plate hanger Fit left hand indicator wire and tail light wire through middle right-hand hole in R&G plate hanger (one at a time) Offer up R&G plate to bike Feed wires through the holes in the undertray Fix R&G plate to undertray, using the original screws Reconnect wires according to the colour coding Replace rear seat       Consumer Insert The catalogue description and any exhibition of samples are only broad indications of the Products and R & G may make design changes which do not diminish their performance or visual appeal and supplying them in such state shall conform to the order. The Buyer acknowledges no representation or warranty (other than as to title) has been given or will apply to the Products other than those in R & G’s order or confirmation and the Buyer confirms it has chosen the Products as being of merchantable quality and suitable for its particular purposes. Where R & G fits the Products or undertakes other services it shall exercise reasonable skill and care and rectify any fault free of charge unless the workmanship has been disturbed. The Buyer is responsible for ensuring that the warranty on the motorcycle is not affected by the fitting of the Products. On return of any defective Products R & G shall at its option either supply a replacement or refund the purchase money but shall not be liable if the Products have been modified or used or maintained otherwise than in accordance with R & G’s or manufacturer’s instructions and good engineering practice or if the defect arises from accident or neglect. Other than identified above and subject to R & G not limiting its liability for causing death and personal injury, it shall not be liable for indirect or consequential loss and otherwise its liability shall be limited to the amounts paid by the Buyer for the Products or the fitting or service concerned. These terms do not affect the Buyer’s statutory rights. R&G RACING RETURNS POLICY (NON-FAULTY GOODS) Returns must be pre-authorised (if not pre-authorised the return will be rejected) Goods may only be returned direct to us if they were purchased direct from us (customer must prove if necessary). Otherwise to be returned to original vendor. Goods must be in re-sellable condition, in the opinion of R&G Racing All returns are subject to a 25% restocking and handling fee (25% of the gross value exc. P&P – at the prevailing price at time of purchase) The customer must pay any and all carriage charges No returns of discontinued products, unless within 14 days of purchase This policy does not affect your statutory rights and does not refer to faulty goods
	<<Back

All crash protector and frame slider prices include VAT at 17.5%. Postage & Packaging is dependent on weight of total order

Key: S=Set P=Pair E=Each

/ Crash protectors and frame sliders /