Dropping your cherished bike can be an expensive exercise. R&G Adventure Bars offer the rider peace of mind. R&G Adventure Bars provide essential crash protection for your motorcycle. Made from mild steel and powder coated for a superb finish our Adventure Bars are strong, stylish and easy to install.

All R&G crash protection solutions are designed to be bike specific, therefore ensuring the best fit to your motorcycle without the need to modify.

All R&G products come supplied with comprehensive fitting instructions and with all hardware required.

This Adventure bar kit is designed to specifically Triumph Explorer 1200 ('12-).

* Made in the UK *

R&G Racing – innovation not imitation!

    
NB. 3D Products and Installation Guides may take a moment to load. 

This Engine Case Cover (Left Hand Side) is suitable for the Triumph Explorer 1200 ('12- model).

These exciting new Engine Case Covers have been developed in collaboration with selected race teams and crash tested within the R&G Racing Suzuki GSX-R Trophy. Crafted from 4mm polypropylene for strength, durability and good looks, they complement our crash protectors perfectly.

The covers simply bolt on over the original engine casing so no messing with glue or removing anything. Slimline for maximum ground clearance, ultra lightweight, matt finish and protecting one of the most vulnerable parts of the machine, these could save you £'s in the event of an accident ... Ever seen the prices of a new engine casing or the cost of removing debris from your engine?

  
NB. 3D Products and Installation Guides may take a moment to load. 

This Engine Case Cover (Right Hand Side) is suitable for the Triumph Explorer 1200 ('12- model).

These exciting new Engine Case Covers have been developed in collaboration with selected race teams and crash tested within the R&G Racing Suzuki GSX-R Trophy. Crafted from 4mm polypropylene for strength, durability and good looks, they complement our crash protectors perfectly.

The covers simply bolt on over the original engine casing so no messing with glue or removing anything. Slimline for maximum ground clearance, ultra lightweight, matt finish and protecting one of the most vulnerable parts of the machine, these could save you £'s in the event of an accident ... Ever seen the prices of a new engine casing or the cost of removing debris from your engine?

  
NB. 3D Products and Installation Guides may take a moment to load. 

These fork protectors are suitable for the Triumph Tiger Explorer 1200 ('12- onwards) models. They help to eliminate damage to the front forks, fork bottoms and brake calipers during a crash or drop.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Available in a black finish to fit the Triumph Tiger Explorer 1200 ('12- onwards). Made from pressed aluminium and feature a neat, seamless frame (where applicable). They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris.

No permanent modifications need to be made to the bike.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Completely enclosing the motorcycles rear shock absorber and spring, Shocktube prevents damage from road salt, water spray, stone chipping, dust and dirt.

Patent No: GB2459728

    
NB. 3D Products and Installation Guides may take a moment to load. 

These bar end protectors are suitable for the Honda CrossRunner ('11-), Honda SH300i ('07-) and Triumph Tiger Explorer 1200 ('12-)models.

Helping to protect those expensive levers and clipons from damage in the event of a drop or crash.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Licence plate adapters to suit US style plates (amongst others), once installed enable a certain amount of flexibility when fitting the a number plate, replacing the need to redrill your number plate.

Available in 2 sizes. 0.75 inch or 1 inch extensions.


Supplied in pairs.

NO TAIL TIDY BRACKET IS SUPPLIED WITH THIS KIT

    
NB. 3D Products and Installation Guides may take a moment to load. 

Brand new for 2012. Our Elevation series Paddock Stands are modular for easy takedown and transportation yet strong and sturdy when assembled.

This model is a Front Paddock Stand and has specially designed adapters on the arms which hook and slot into the underside of the forks legs.

Made from high quality FE360 tubular steel and powder coated black for a superb crisp finish. Coming supplied with 4 high quality red castors wheels for smooth rolling action and extra stability.

  
NB. 3D Products and Installation Guides may take a moment to load. 

This Swingarm Protector kit is suitable for the Triumph Explorer 1200 and Triumph Trophy 1200 ('12 onwards) models.

Fitting into the side of the swingarm, this protector helps to protect the swingarm, rear caliper and belt drive sprocket from damage in the event of a drop of crash.

  
NB. 3D Products and Installation Guides may take a moment to load. 

The R&G Adventure Outdoor Cover is waterproof and fits on adventure and touring sized bikes.

Capable of covering the largest of bikes even with the panniers still left on the bike! Including the BMW R1200GS, Yamaha Super Tenere, Ducati Diavel, BMW K1600, Triumph Tiger Explorer 1200, Honda Varadero, Honda Crosstourer (removal of side cases is required) and NC700 plus many more.

Designed and made to the same high standards as our award winning Superbike Cover - claiming "Best Buy" status by Ride Magazine (Dec '08 issue) scoring a straight 21/21 points - what more can you ask for!

Available in Black only with high visibility reflective silver logo and trim, underbike straps and front and rear chain security loops.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Keep your clutch reservoir protected with our handy Clutch Reservoir Protector (Booty)!

  
NB. 3D Products and Installation Guides may take a moment to load. 

Awarded RiDE magazine Best buy award for 2011.

R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs - heating upto 35°C in only two minutes and max out at 60°C depending on heat setting.

    
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Micro Indicators (turnsignals) designed to be fitted to the rear of your motorbike.

Can be used on the front or rear of the bike.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G LED Micro Indicators (turnsignals) are designed to be fitted to the rear of your motorbike. Sold in pairs, they come as standard with both amber and clear lenses.

Can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors. Please see the relevant tail tidy section of our website to find out more.

Note: In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0001 (see related products below)

  
NB. 3D Products and Installation Guides may take a moment to load. 

Are your led micro / mini indicators flashing incorrectly?

In many cases, after fitting micro / mini indicators, you may find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.

Note: We highly recommend buying this product when purchasing LED micro / mini indicators in order to save any disappointment when fitting.

NO wire cutting or soldering is required, these resistors fit inline.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Racing Cap.

As seen on the BSB Grid along with our Umbrella.

Available in Black with gold or silver trims.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Been there, done that? Now you can have the T-shirt!

Available in Blue or Black.

With R&G Slogans:
"Slip it, slide it, pick it up and ride it..."
or
"Whenever I ride, I use protection...".

Available in Small, Medium, Large or Extra Large.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Racing Umbrella in silver and black with R&G Logo.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our revolutionary tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike. ** Part does not include Ratchet Straps ** R&G Racing Handlebar Top Straps ST0001BL R&G Racing Handlebar Top Straps, 25mm Ratchet Straps, RG, R&G Racing, bike parts, motorbike supplies

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our revolutionary 25mm tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike. Individual ratchet strap length: 72" (180cm) ** Part does not include top-strap ** 25mm Ratchet Straps ST0699 25mm Ratchet Straps ST0699

  
NB. 3D Products and Installation Guides may take a moment to load. 

New for 2012 comes our Visor Pouch/Protector, compatible with all major brand visors. Ideal for carrying a spare clear visor for when it gets dark or vice versa. Equipped with a high-quality fastex buckle and belt (expandable up to 48 inches) and features a fleece-lined interior to keep your visor in best condition - coupled with a large Velcro closing tab, making the visor easy to get out when needed and ensuring it stays safe and secure when not.

Comes with reflective "R&G" logo and text to help aid visibility.

Available only in Black.(Visor not included!)

  
NB. 3D Products and Installation Guides may take a moment to load. 

Give your visor that racing look as used by many R&G supported riders in BSB and around the world.

Supplied as a pair.

  
NB. 3D Products and Installation Guides may take a moment to load.