These crash protectors are suitable for the Triumph Daytona 955i, 595 and T595.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Suitable for the Yoshimura R-77 exhaust.

  
NB. 3D Products and Installation Guides may take a moment to load. 

The Shocktube is a high-impact, waterproof, vented tube, made from top quality, bonded 100% CR Neoprene™ which is double lined with stretch nylon on both sides.
Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube prevents damage from road salt, water spray, stone chipping, dust and dirt.
The Shocktube can be fitted to most motorcycles with either monoshock or twin shock systems quickly, without the need to remove the shock absorber!
It continually protects the rear shock absorber and spring, while still maintaining the condition of the shock for a substantially extended period of time, throughout the life of the motorcycle.

Can't find the right shocktube to fit your bike?
Simply measure your own!
Measuring Instructions

Using a ridged or flexible tape measure,
mark down the the spring length in mm
from the top edge of the pre-load adjuster ring,
to the bottom edge of the lowest part of the spring.
Then.....
using a flexible tape measure, mark down
the circumference in mm of the spring around its
thickest part at the top or bottom of the spring.

Simply contact us by phone or email and we should be able to provide you with the correct fitting Shocktube.

See additional pictures in gallery for assistance.

  
NB. 3D Products and Installation Guides may take a moment to load. 

These spindle sliders are suitable for the Triumph Daytona 595, T595, 955i, Sprint ST (2005 model onwards) and Speed Triple (1997 onwards).

    
NB. 3D Products and Installation Guides may take a moment to load. 

They protect your knees! What more can we say......

....oh - they are available in black or white!! Now new and improved aero styling too!

  
NB. 3D Products and Installation Guides may take a moment to load. 

These Bar End Sliders are suitable for Gilles (Plain) Bars.

  
NB. 3D Products and Installation Guides may take a moment to load. 

These Bar End Sliders are suitable for Gilles (Threaded) Vario and GP Light Bars.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Protect your bars with our great little bar end sliders/protectors. Suitable for Renthal bars, LSL bars and for the Ducati 848 '08- and Ducati Diavel (2011-).

  
NB. 3D Products and Installation Guides may take a moment to load. 

The R&G Superbike Outdoor Cover is waterproof and fits on all modern sportsbikes and most dirt bikes and supermotos.

Awarded "Best Buy" by Ride Magazine (Dec '08 issue) this bike cover scored a straight 21/21 points - what more can you ask for!

Available in Black or Silver.

    
NB. 3D Products and Installation Guides may take a moment to load. 

You've got your bike protected, now what about your ears!

These DIY moulded ear plugs offer a low cost, re-usable custom moulded earplug in a do it yourself kit.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Awarded RiDE magazine Best buy award for 2011.

R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs - heating upto 35°C in only two minutes and max out at 60°C depending on heat setting.

    
NB. 3D Products and Installation Guides may take a moment to load. 

These R&G Deluxe leather gloves are reinforced with two layers of leather and two protectors on the palm to prevent damage to your scaphoid bone in the wrist. The thumb and index finger are fitted with a non-slip material, the knuckles are carbon Kevlar with padding and are articulated to improve comfort. The long cuff has a padded bottom and a carbon shield on top to protect the ulna (small raised bone at the top of the wrist). The gloves are secured with a single elasticated Velcro fastening to ensure a snug fit.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Micro Indicators (turnsignals) designed to be fitted to the rear of your motorbike.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Are your micro / mini indicators flashing incorrectly?

In many cases, after fitting micro / mini indicators, you will find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Spare / replacement amber light bulb for R&G Micro Indicators (turnsignals).

  
NB. 3D Products and Installation Guides may take a moment to load. 

These paddock stand hooks fit rear stands made by Harris and are designed to be used in conjuntion with our R&G paddock stand bobbins and cotton reels.

  
NB. 3D Products and Installation Guides may take a moment to load. 

These hooks fit the Micron, Champion and Scorpion stands. The diameter of the bar is 12mm.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Take care of your helmet with our R&G Racing Deluxe Helmet Bag!

Made from a tough, hard-wearing outer and fleece lining, this universal helmet bag protects against dust and light knocks.

  
NB. 3D Products and Installation Guides may take a moment to load. 

The R&G Racing Keyring has a powerful LED light built in with a push & hold button to activate it. The light prevents you from scratching your pride and joy in the dark when your fumbling around looking for that keyhole.

  
NB. 3D Products and Installation Guides may take a moment to load. 

The R&G Racing sew on patch as worn by numerous racers sponsored by R&G Racing is now available for you to buy too!

  
NB. 3D Products and Installation Guides may take a moment to load. 

Stick them on your bike, your car, your garage door, your bedroom wall, your tool box....... Stick them anywhere you like!

This R&G Sticker Sheet consists of 15 individual stickers - ii black and 4 silver.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Been there, done that? Now you can have the T-shirt! Available in Black.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Been there, done that? Now you can have the T-shirt! Available in Blue.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Been there, done that? Now you can have the T-shirt! Available in Black.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Been there, done that? Now you can have the T-shirt! Available in Blue.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Racing Umbrella in silver and black with R&G Logo.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our revolutionary tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike.


** Part does not include Ratchet Straps **

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our revolutionary 25mm tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike.

Individual ratchet strap length: 72" (180cm)

** Part does not include top-strap **

  
NB. 3D Products and Installation Guides may take a moment to load. 

Replacement tail tidy light for tail tidies supplied with the new style R&G light.
PLEASE NOTE THIS IS THE LIGHT UNIT ONLY AND DOES NOT INCLUDE ANY BRACKETS.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Protect your fuel tank from scratches and unwanted marks from zippers/buckles and general wear and tear with our newly developed traditional style tank pad.

Available in Black.

  
NB. 3D Products and Installation Guides may take a moment to load.