These crash protectors feature our stylish, aerodynamic Aero Bobbin and are suitable for the Triumph ST and GT 2010 Models.

R&G Aero Bobbins are a stylish, aerodynamic, teardrop shaped bobbin improving on the original good looks of our highly successful and popular standard round bobbins. Fitted with a removable end cap which hides the bobbins fittings, this sleek new design looks superb and is a winner on road and track!

    
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Radiator Guards are made from aluminium, improve looks and protect your expensive and vulnerable radiator, downpipes and oil cooler from flying debris thanks to a new design going to the base of the fairing.

This radiator guard is suitable for Triumph Sprint GT 2010 model onward.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Completely enclosing the motorcycles rear shock absorber and spring, Shocktube prevents damage from road salt, water spray, stone chipping, dust and dirt.

Patent No: GB2459728

    
NB. 3D Products and Installation Guides may take a moment to load. 

This Tail Tidy is suitable for the Triumph Sprint ST 2005 onwards.

    
NB. 3D Products and Installation Guides may take a moment to load. 

These Bar End Sliders are suitable for the Triumph 1050 Sprint GT / ST and the MZ1000S.

Please be aware this kit requires the use of OEM bolts to secure the bar end to the clip-on.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Suitable for the Yoshimura R-77 exhaust.

  
NB. 3D Products and Installation Guides may take a moment to load. 

These fork protectors are suitable for the Triumph Sprint ST (models produced from 2005 onwards).

    
NB. 3D Products and Installation Guides may take a moment to load. 

This frame insert is suitable for the Triumph Speed Triple '05-'08 aswell as Sprint ST and Sprint GT 2010 models and fits to the left hand side of the bike.

  
NB. 3D Products and Installation Guides may take a moment to load. 

This frame insert is suitable for:

Kawasaki ZX6-R '07-'08 - fits to the left hand side of the bike only.

Triumph Speed Triple '05-'08, Sprint GT 2010 and Sprint ST 2010 Models - fits to the right hand side of the bike only.

Yamaha FZ8 2010 Model - fits to the left hand side of the bike

    
NB. 3D Products and Installation Guides may take a moment to load. 

The Shocktube is a high-impact, waterproof, vented tube, made from top quality, bonded 100% CR Neoprene™ which is double lined with stretch nylon on both sides.
Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube prevents damage from road salt, water spray, stone chipping, dust and dirt.
The Shocktube can be fitted to most motorcycles with either monoshock or twin shock systems quickly, without the need to remove the shock absorber!
It continually protects the rear shock absorber and spring, while still maintaining the condition of the shock for a substantially extended period of time, throughout the life of the motorcycle.

Can't find the right shocktube to fit your bike?
Simply measure your own!
Measuring Instructions

Using a ridged or flexible tape measure,
mark down the the spring length in mm
from the top edge of the pre-load adjuster ring,
to the bottom edge of the lowest part of the spring.
Then.....
using a flexible tape measure, mark down
the circumference in mm of the spring around its
thickest part at the top or bottom of the spring.

Simply contact us by phone or email and we should be able to provide you with the correct fitting Shocktube.

See additional pictures in gallery for assistance.

  
NB. 3D Products and Installation Guides may take a moment to load. 

These spindle sliders are suitable for the Triumph Daytona 595, T595, 955i, Sprint ST (2005 model onwards) and Speed Triple (1997 onwards).

    
NB. 3D Products and Installation Guides may take a moment to load. 

Keep your clutch reservoir protected with our handy Clutch Reservoir Protector (Booty)!

  
NB. 3D Products and Installation Guides may take a moment to load. 

Awarded RiDE magazine Best buy award for 2011.

R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs - heating upto 35°C in only two minutes and max out at 60°C depending on heat setting.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Protect your fuel tank from scratches and unwanted marks from zippers/buckles and general wear and tear with our newly developed traditional style tank pad.

Available in Black.

  
NB. 3D Products and Installation Guides may take a moment to load.