These cotton reels mount to the paddock stand mounting points on the rear swingarm and are suitable for most Hondas & Suzukis'

  
NB. 3D Products and Installation Guides may take a moment to load. 

These crash protectors are suitable for the Suzuki SV650 K3 onwards - fully faired models.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Tidy up your bike's rear end with this R&G Tail Tidy/Licence Plate Holder!

Suitable for the Suzuki SV650 K7 onwards.

    
NB. 3D Products and Installation Guides may take a moment to load. 

This Supermoto Style Round Exhaust Protector (Can Cover) will fit both left and right cans/exhausts. This protector is a similiar design to the oval supermoto exhaust protector but with a 100mm diameter.

    
NB. 3D Products and Installation Guides may take a moment to load. 

These bar end protectors are suitable for the Suzuki SV650, SV1000, GSXF600 (produced from 1998 onwards), GSX750 FW (produced from 1998 onwards) & the GSX-R600/750 SRAD.

  
NB. 3D Products and Installation Guides may take a moment to load. 

This Exhaust Hanger is suitable for Suzuki SV650 '03 onwards models with a single exhaust system.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Heated grips add months to your motorcycling season and comfort to almost any ride.

    
NB. 3D Products and Installation Guides may take a moment to load. 

These anodised aluminium paddock stand bobbins are suitable for most Hondas and Suzukis.

  
NB. 3D Products and Installation Guides may take a moment to load. 

This generic Oval Exhaust Protector (Can Cover) is available for both left and right cans/exhausts.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Been there, done that? Now you can have the T-shirt! Available in Black.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Been there, done that? Now you can have the T-shirt! Available in Blue.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Been there, done that? Now you can have the T-shirt! Available in Black.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Been there, done that? Now you can have the T-shirt! Available in Blue.

  
NB. 3D Products and Installation Guides may take a moment to load. 

These toe/chain guards are made from ABS Plastic. They look good, can be fitted in less than five minutes and are available in black or carbon look.

    
NB. 3D Products and Installation Guides may take a moment to load. 

These toe/chain guards are made from Aluminium and have a Black Finish. They are suitable for bikes with Dual Swingarms.

    
NB. 3D Products and Installation Guides may take a moment to load. 

These toe/chain guards are made from Aluminium and have a Silver Finish. They are suitable for bikes with Dual Swingarms.

    
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Racing's new, road-racing inspired toe guard has been developed in conjunction with roads hero Ryan Farquhar. Made from lightweight, high-density polyethylene, it features slots for improved positioning and a longer-than-usual kickback, in order to ensure adequate coverage of the sprocket in cases of running a long wheelbase - a typical feature of road racing.

    
NB. 3D Products and Installation Guides may take a moment to load. 

They protect your knees! What more can we say......

....oh - they are available in black or white!! Now new and improved aero styling too!

  
NB. 3D Products and Installation Guides may take a moment to load. 

These Bar End Sliders are suitable for Renthal Bars and for the Ducati 848 '08-.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Keep your clutch reservoir protected with our handy Clutch Reservoir Protector (Booty)!

  
NB. 3D Products and Installation Guides may take a moment to load. 

These covers are breathable, soft and elasticated. They can also be spun dry.

  
NB. 3D Products and Installation Guides may take a moment to load. 

The R&G Superbike Outdoor Cover is waterproof and fits on all modern sportsbikes and most dirt bikes and supermotos.

Awarded "Best Buy" by Ride Magazine (Dec '08 issue) this bike cover scored a straight 21/21 points - what more can you ask for!

    
NB. 3D Products and Installation Guides may take a moment to load. 

These R&G Deluxe leather gloves are reinforced with two layers of leather and two protectors on the palm to prevent damage to your scaphoid bone in the wrist. The thumb and index finger are fitted with a non-slip material, the knuckles are carbon Kevlar with padding and are articulated to improve comfort. The long cuff has a padded bottom and a carbon shield on top to protect the ulna (small raised bone at the top of the wrist). The gloves are secured with a single elasticated Velcro fastening to ensure a snug fit.

  
NB. 3D Products and Installation Guides may take a moment to load. 

These R&G blue leather gloves are made from quality leather and include suede inner hand patches for extra grip, elasticated wrists with adjustable velcro strap for optimum comfort fitting and carbon kevlar padding on the fingers and knuckles for extra protection.

  
NB. 3D Products and Installation Guides may take a moment to load. 

These R&G green leather gloves are made from quality leather and include suede inner hand patches for extra grip, elasticated wrists with adjustable velcro strap for optimum comfort fitting and carbon kevlar padding on the fingers and knuckles for extra protection.

  
NB. 3D Products and Installation Guides may take a moment to load. 

These R&G red leather gloves are made from quality leather and include suede inner hand patches for extra grip, elasticated wrists with adjustable velcro strap for optimum comfort fitting and carbon kevlar padding on the fingers and knuckles for extra protection.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Micro Indicators (turnsignals) designed to be fitted to the rear of your motorbike.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Are your micro / mini indicators flashing incorrectly?

In many cases, after fitting micro / mini indicators, you will find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Spare / replacement amber light bulb for R&G Micro Indicators (turnsignals).

  
NB. 3D Products and Installation Guides may take a moment to load. 

These paddock stand hooks fit rear stands made by Harris and are designed to be used in conjuntion with our R&G paddock stand bobbins and cotton reels.

  
NB. 3D Products and Installation Guides may take a moment to load. 

These hooks fit the Micron, Champion and Scorpion stands. The diameter of the bar is 12mm.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Take care of your helmet with our R&G Racing Deluxe Helmet Bag!

Made from a tough, hard-wearing outer and fleece lining, this universal helmet bag protects against dust and light knocks.

  
NB. 3D Products and Installation Guides may take a moment to load. 

The R&G Racing Keyring has a powerful LED light built in with a push & hold button to activate it. The light prevents you from scratching your pride and joy in the dark when your fumbling around looking for that keyhole.

  
NB. 3D Products and Installation Guides may take a moment to load. 

The R&G Racing sew on patch as worn by numerous racers sponsored by R&G Racing is now available for you to buy too!

  
NB. 3D Products and Installation Guides may take a moment to load. 

Stick them on your bike, your car, your garage door, your bedroom wall, your tool box....... Stick them anywhere you like!

This R&G Sticker Sheet consists of 15 individual stickers - ii black and 4 silver.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Racing Umbrella in silver and black with R&G Logo.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our revolutionary tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike.


** Part does not include Ratchet Strap's **

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our revolutionary 25mm tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike.


** Part does not include top-strap **

  
NB. 3D Products and Installation Guides may take a moment to load.