These crash protectors feature our stylish, aerodynamic Aero Bobbin and are suitable for the Honda CrossRunner (2011 Model onwards).

R&G Aero Bobbins are a stylish, aerodynamic, teardrop shaped bobbin improving on the original good looks of our highly successful and popular standard round bobbins. Fitted with a removable end cap which hides the bobbins fittings, this sleek new design looks superb and is a winner on road and track!

  
NB. 3D Products and Installation Guides may take a moment to load. 

Honda Cross Runner (2011) Right Hand Side Engine Case Cover.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Oil Cooler Guards are available in a black finish. They are made from pressed aluminium and feature a neat, seamless frame. They improve the looks of your bike and help to protect your expensive and vulnerable oil cooler from flying debris.

No permanent modifications need to be made to the bike.

This oil cooler guard is suitable for the Honda Crossrunner (2011).

    
NB. 3D Products and Installation Guides may take a moment to load. 

Completely enclosing the motorcycles rear shock absorber and spring, Shocktube prevents damage from road salt, water spray, stone chipping, dust and dirt.

Patent No: GB2459728

    
NB. 3D Products and Installation Guides may take a moment to load. 

These bar end protectors are suitable for the Honda CrossRunner ('11-), Honda SH300i ('07-) and Triumph Tiger Explorer 1200 ('12-)models.

Helping to protect those expensive levers and clipons from damage in the event of a drop or crash.

  
NB. 3D Products and Installation Guides may take a moment to load. 

These fork protectors are suitable for the Honda CBF600 '08- and help to eliminate damage to the front forks during a drop.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Eliminate that annoying spinning grip by getting a tube of grip glue. Holds grips firmly in place. Helps to reduce arm pump caused by trying to hold spinning grips in place.


Ideally suited to be used when installed R&G Heated Grips.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Licence plate adapters to suit US style plates (amongst others), once installed enable a certain amount of flexibility when fitting the a number plate, replacing the need to redrill your number plate.

Available in 2 sizes. 0.75 inch or 1 inch extensions.


Supplied in pairs.

NO TAIL TIDY BRACKET IS SUPPLIED WITH THIS KIT

    
NB. 3D Products and Installation Guides may take a moment to load. 

Brand new for 2012. Our Elevation series Paddock Stands are modular for easy takedown and transportation yet strong and sturdy when assembled.

This model is a Front Paddock Stand and has specially designed adapters on the arms which hook and slot into the underside of the forks legs.

Made from high quality FE360 tubular steel and powder coated black for a superb crisp finish. Coming supplied with 4 high quality red castors wheels for smooth rolling action and extra stability.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Brand new for 2012. Our Elevation series Paddock Stands are modular for easy takedown and transportation yet strong and sturdy when assembled.

This model is a Rear Paddock Stand and has specially designed hooks and adjustable arms fully compatible with our cotton reels and spindle sliders.

Made from high quality FE360 tubular steel and powder coated black for a superb crisp finish. Coming supplied with 4 high quality red castors wheels for smooth rolling action and extra stability.

  
NB. 3D Products and Installation Guides may take a moment to load. 

This pin kit is suitable for our single sided swingarm paddock stands for bikes with a rear spindle diameter of 28.6mm (ID)

  
NB. 3D Products and Installation Guides may take a moment to load. 

These swingarm protector kit is suitable for the Honda CrossRunner (2011) model.

Fitting into the left hand side of the swing arm this protect helps to protect the swingarm, rear calipers, discs and sprocket from damage in the event of a drop of crash.

  
NB. 3D Products and Installation Guides may take a moment to load. 

The R&G Adventure Outdoor Cover is waterproof and fits on adventure and touring sized bikes.

Capable of covering the largest of bikes even with the panniers still left on the bike! Including the BMW R1200GS, Yamaha Super Tenere, Ducati Diavel, BMW K1600, Triumph Tiger Explorer 1200, Honda Varadero, Honda Crosstourer (removal of side cases is required) and NC700 plus many more.

Designed and made to the same high standards as our award winning Superbike Cover - claiming "Best Buy" status by Ride Magazine (Dec '08 issue) scoring a straight 21/21 points - what more can you ask for!

Available in Black only with high visibility reflective silver logo and trim, underbike straps and front and rear chain security loops.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Our Aero Knee Sliders are heavily used all over the world, seen on the best riders, roads and tracks of the planet. They are extensively used by many riders in the British Superbike Championship (amongst others) and race schools worldwide.

Developed with the feedback of racers and road riders alike, many asking for a knee sliders to give them better feel and confidence when leant over. we made our latest generation Aero Knee Sliders, made from a special blend of composite materials to ensure the riders gets the best feedback available.

Attaching to your suit via velcro.

Available in Black or White.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Keep your clutch reservoir protected with our handy Clutch Reservoir Protector (Booty)!

  
NB. 3D Products and Installation Guides may take a moment to load. 

These covers are breathable, soft and elasticated. They can also be spun dry.

Ideal for keeping your pride and joy spotlessly clean over the winter or when put back into indoor after cleaning!

Made from a high quality breathable material that allows the air to constantly travel through.

Available in Black with Silver logo and piping.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Awarded RiDE magazine Best buy award for 2011.

R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs - heating upto 35°C in only two minutes and max out at 60°C depending on heat setting.

    
NB. 3D Products and Installation Guides may take a moment to load. 

These R&G Deluxe leather gloves are reinforced with two layers of leather and two protectors on the palm to prevent damage to your scaphoid bone in the wrist. The thumb and index finger are fitted with a non-slip material, the knuckles are carbon Kevlar with padding and are articulated to improve comfort. The long cuff has a padded bottom and a carbon shield on top to protect the ulna (small raised bone at the top of the wrist). The gloves are secured with a single elasticated Velcro fastening to ensure a snug fit.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Micro Indicators (turnsignals) designed to be fitted to the rear of your motorbike.

Can be used on the front or rear of the bike.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G LED Micro Indicators (turnsignals) are designed to be fitted to the rear of your motorbike. Sold in pairs, they come as standard with both amber and clear lenses.

Can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors. Please see the relevant tail tidy section of our website to find out more.

Note: In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0001 (see related products below)

  
NB. 3D Products and Installation Guides may take a moment to load. 

Are your led micro / mini indicators flashing incorrectly?

In many cases, after fitting micro / mini indicators, you may find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.

Note: We highly recommend buying this product when purchasing LED micro / mini indicators in order to save any disappointment when fitting.

NO wire cutting or soldering is required, these resistors fit inline.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Racing Cap.

As seen on the BSB Grid along with our Umbrella.

Available in Black with gold or silver trims.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Been there, done that? Now you can have the T-shirt!

Available in Blue or Black.

With R&G Slogans:
"Slip it, slide it, pick it up and ride it..."
or
"Whenever I ride, I use protection...".

Available in Small, Medium, Large or Extra Large.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Racing Umbrella in silver and black with R&G Logo.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our revolutionary tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike. ** Part does not include Ratchet Straps ** R&G Racing Handlebar Top Straps ST0001BL R&G Racing Handlebar Top Straps, 25mm Ratchet Straps, RG, R&G Racing, bike parts, motorbike supplies

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our revolutionary 25mm tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike. Individual ratchet strap length: 72" (180cm) ** Part does not include top-strap ** 25mm Ratchet Straps ST0699 25mm Ratchet Straps ST0699

  
NB. 3D Products and Installation Guides may take a moment to load. 

New for 2012 comes our Visor Pouch/Protector, compatible with all major brand visors. Ideal for carrying a spare clear visor for when it gets dark or vice versa. Equipped with a high-quality fastex buckle and belt (expandable up to 48 inches) and features a fleece-lined interior to keep your visor in best condition - coupled with a large Velcro closing tab, making the visor easy to get out when needed and ensuring it stays safe and secure when not.

Comes with reflective "R&G" logo and text to help aid visibility.

Available only in Black.(Visor not included!)

  
NB. 3D Products and Installation Guides may take a moment to load. 

Give your visor that racing look as used by many R&G supported riders in BSB and around the world.

Supplied as a pair.

  
NB. 3D Products and Installation Guides may take a moment to load.