Maximise your potential, tune your machine to your exact requirements. R&G Racing Honda CBR1000RR Adjustable Rearsets are milled out of lightweight aluminium for high strength and durability. R&G adjustable rearsets provide the option to assemble with racing shift-pattern(1 up - 5 down) or road setup as standard (1 down - 5 up). Our rearsets provide large adjustments and exact positioning to suit every rider (11 positions). Designed to be easily installed. Powdercoated in black with crisp white R&G graphics on the peg and levers, giving these rearsets a very sharp look. The footrests are specially textured to ensure maximum grip in even the most tricky situations. Full fitting kit, including instructions, enclosed.

Designed specifically for the Honda CBR1000RR '08-'12 (INCLUDING ABS MODELS - however adjustability is slightly reduced)

    
NB. 3D Products and Installation Guides may take a moment to load. 

These cotton reels mount to the paddock stand mounting points on the rear swingarm and are suitable for most Hondas & Suzukis'

  
NB. 3D Products and Installation Guides may take a moment to load. 

These new style cotton reels are a cross between our traditional style cotton reels and swingarm protectors. Suitable for the Honda CBR600RR 2005 onwards & CBR1000RR Fireblade '08 onwards models.

  
NB. 3D Products and Installation Guides may take a moment to load. 

These crash protectors feature our stylish, aerodynamic Aero Bobbin and are suitable for the Honda CBR1000RR Fireblade '08-2012.

R&G Aero Bobbins are a stylish, aerodynamic, teardrop shaped bobbin improving on the original good looks of our highly successful and popular standard round bobbins. Fitted with a removable end cap which hides the bobbins fittings, this sleek new design looks superb and is a winner on road and track!

      
NB. 3D Products and Installation Guides may take a moment to load. 

Suitable for the Honda CBR1000RR ('08-'11)Our industry leading engine case covers are now available in kit form containing all the engine case covers R&G offer for your bike in one go. Developed on track and brought to the road our engine case...

  
NB. 3D Products and Installation Guides may take a moment to load. 

Honda CBR1000RR (Fireblade) 08- (NON ABS Models) Left Hand Side Crank Case Cover.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Right hand side crankcase cover for the Honda CBR1000RR Fireblade motorbikes.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Suitable for the Honda CB1000R RHS crankcase cover.

    
NB. 3D Products and Installation Guides may take a moment to load. 

This Rear Tyre Hugger is suitable for Honda CBR1000RR ('08 models onwards) - suitable for ABS and non ABS models.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Tidy up your bike's rear end with this R&G Tail Tidy/Licence Plate Holder!

Aluminium alternative Tail Tidy to suit the 2010 CBR1000RR Fireblade Our best selling LP0063BK is also available for this bike.


Suitable for the Honda CBR1000RR Fireblade 2010 with and without ABS. Original (OEM) or mini / micro indicators can be fitted - see related products for R&G Micro Indicators.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Tidy up your bike's rear end with this R&G Tail Tidy/Licence Plate Holder!

Suitable for the Honda CBR1000RR Fireblade '08-'11.

    
NB. 3D Products and Installation Guides may take a moment to load. 

This Tank Slider (pair) kit is compatible with the Honda CBR1000RR ('08-'11).

As used by the California Superbike School. (http://www.superbikeschool.com/)

Our Tank Sliders are made from Carbon fibre which is Kevlar reinforced, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tank, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.

Application takes only minutes and they could save you having to replace your tank which can get dented or scratched in the event of a crash.

This alarm mounting kit is required if you have a Honda genuine "Averto" alarm and you wish to fit our tail tidy (LP0063BK) to your Honda CBR1000RR Fireblade '08.

    
NB. 3D Products and Installation Guides may take a moment to load. 

These bar end protectors are suitable for the Honda CBR400, CB500 (models produced up to 2002), CBF500, CBF600 '08, CBF1000 ABS 2006-, CBF1000GT '08 (faired),CBR600, CBR600RR 2003-2009, CB250 Hornet, CB600 Hornet, CBF600, CB900 Hornet, CB1300, CBR900 Fireblade 1992-2003, CBR1000RR Fireblade 2004-2009, CB1000R '08-'09, VFR800i 1998-2001, VFR800 V-TEC, VFR800 Interceptor, VTR1000 models and the CBR1100 Blackbird.

Please be aware this kit requires the use of OEM bolts to secure the bar end to the clip-on.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Suitable for Suzuki GSX-R600 L1 (2011-), Suzuki GSR750 (2011-), Honda CBR125R (2011-), Honda CBR250R (2011-), Honda CB600 (2011-), Honda CBR600F (2011-) Honda CBR1000RR (08-) and Aprilia V4 Tuono ('11).

  
NB. 3D Products and Installation Guides may take a moment to load. 

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Suitable for the Yoshimura R-77 exhaust.

  
NB. 3D Products and Installation Guides may take a moment to load. 

These fork protectors are suitable for the Honda CBR1000RR Fireblade '08 models.

    
NB. 3D Products and Installation Guides may take a moment to load. 

This frame insert is suitable for the Honda CBR1000RR Fireblade '08 model and fits to the right hand side of the bike.

  
NB. 3D Products and Installation Guides may take a moment to load. 

This frame insert is suitable for:

Honda CBR1000RR Fireblade '08 - fits to the left hand side of the bike only.

Kawasaki ZX6-R '07-'08 - fits right hand side only.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Made by HEL - Brought to you by R&G Racing.

This kit is designed for the Honda CBR1000RR Fireblade (2010) Models and comes supplied with 2 hoses that connect direct from the master cylinder, one to each calliper.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Universal Licence plate adapters to suit different number plates hole widths, once installed enable a certain amount of flexibility when fitting the a number plate, replacing the need to redrill your number plate.

Available in a one size fits all.

Supplied in pairs.

NO TAIL TIDY BRACKET IS SUPPLIED WITH THIS KIT

  
NB. 3D Products and Installation Guides may take a moment to load. 

These anodised aluminium paddock stand bobbins are suitable for most Hondas and Suzukis.

Supplied in Pairs

  
NB. 3D Products and Installation Guides may take a moment to load. 

Lose your mirrors for that rebellious look or simply to stop your fairings flapping whilst on track days or racing!

This product is suitable for the Honda CBR1000RR (2008-2012).

  
NB. 3D Products and Installation Guides may take a moment to load. 

Brand new for 2012. Our Elevation series Paddock Stands are modular for easy takedown and transportation yet strong and sturdy when assembled.

This model is a Front Paddock Stand and has specially designed adapters on the arms which hook and slot into the underside of the forks legs.

Made from high quality FE360 tubular steel and powder coated black for a superb crisp finish. Coming supplied with 4 high quality red castors wheels for smooth rolling action and extra stability.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Radiator Guards are made from aluminium, improve looks and protect your expensive and vulnerable radiator from flying debris.

This radiator guard is suitable for Honda CBR1000RR Fireblade 2008-2012.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Made by HEL - Brought to you by R&G Racing.

This kit is designed for the Honda CBR1000RR Fireblade (2010+) and comes supplied with 1 hoses that replaces the OEM hose.

  
NB. 3D Products and Installation Guides may take a moment to load. 

The Shocktube is a high-impact, waterproof, vented tube, made from top quality, bonded 100% CR Neoprene™ which is double lined with stretch nylon on both sides.
Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube prevents damage from road salt, water spray, stone chipping, dust and dirt.
The Shocktube can be fitted to most motorcycles with either monoshock or twin shock systems quickly, without the need to remove the shock absorber!
It continually protects the rear shock absorber and spring, while still maintaining the condition of the shock for a substantially extended period of time, throughout the life of the motorcycle.

Can't find the right shocktube to fit your bike?
Simply measure your own!
Measuring Instructions

Using a ridged or flexible tape measure,
mark down the the spring length in mm
from the top edge of the pre-load adjuster ring,
to the bottom edge of the lowest part of the spring.
Then.....
using a flexible tape measure, mark down
the circumference in mm of the spring around its
thickest part at the top or bottom of the spring.

Simply contact us by phone or email and we should be able to provide you with the correct fitting Shocktube.

See additional pictures in gallery for assistance.

  
NB. 3D Products and Installation Guides may take a moment to load. 

These swingarm protector kit is suitable for the Honda CBR1000RR 2008-2012 models.

This pair of protectors fits into the side of the swing arm spindle and thanks to their expanding design are held securely inplace. Helping to protect the swingarm, rear calipers, discs and drive sprocket from damage in the event of a drop of crash.

  
NB. 3D Products and Installation Guides may take a moment to load. 

This Tail Slider kit is compatible with the Honda CBR1000RR Fireblade ('08-'11).

As used by the California Superbike School. (http://www.superbikeschool.com/)

Our Tail Sliders are made from Carbon fibre which is Kevlar reinforced, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tail, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.

Application takes only minutes and they could save you having to replace your tank which can get dented or scratched in the event of a crash.

  
NB. 3D Products and Installation Guides may take a moment to load. 

High quality holesaw, suitable for modifying your fairing to take the R&G Crash protector kits that require 28mm holes drilled.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our Aero Knee Sliders are heavily used all over the world, seen on the best riders, roads and tracks of the planet. They are extensively used by many riders in the British Superbike Championship (amongst others) and race schools worldwide.

Developed with the feedback of racers and road riders alike, many asking for a knee sliders to give them better feel and confidence when leant over. we made our latest generation Aero Knee Sliders, made from a special blend of composite materials to ensure the riders gets the best feedback available.

Attaching to your suit via velcro.

Available in Black or White.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Keep your clutch reservoir protected with our handy Clutch Reservoir Protector (Booty)!

  
NB. 3D Products and Installation Guides may take a moment to load. 

These covers are breathable, soft and elasticated. They can also be spun dry.

Ideal for keeping your pride and joy spotlessly clean over the winter or when put back into indoor after cleaning!

Made from a high quality breathable material that allows the air to constantly travel through.

Available in Black with Silver logo and piping.

    
NB. 3D Products and Installation Guides may take a moment to load. 

The R&G Superbike Outdoor Cover is waterproof and fits on all modern sportsbikes and most dirt bikes and supermotos.

Awarded "Best Buy" by Ride Magazine (Dec '08 issue) this bike cover scored a straight 21/21 points - what more can you ask for!

Available in Black or Silver.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Awarded RiDE magazine Best buy award for 2011.

R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs - heating upto 35°C in only two minutes and max out at 60°C depending on heat setting.

    
NB. 3D Products and Installation Guides may take a moment to load. 

These R&G Deluxe leather gloves are reinforced with two layers of leather and two protectors on the palm to prevent damage to your scaphoid bone in the wrist. The thumb and index finger are fitted with a non-slip material, the knuckles are carbon Kevlar with padding and are articulated to improve comfort. The long cuff has a padded bottom and a carbon shield on top to protect the ulna (small raised bone at the top of the wrist). The gloves are secured with a single elasticated Velcro fastening to ensure a snug fit.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Micro Indicators (turnsignals) designed to be fitted to the rear of your motorbike.

Can be used on the front or rear of the bike.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G LED Micro Indicators (turnsignals) are designed to be fitted to the rear of your motorbike. Sold in pairs, they come as standard with both amber and clear lenses.

Can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors. Please see the relevant tail tidy section of our website to find out more.

Note: In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0001 (see related products below)

  
NB. 3D Products and Installation Guides may take a moment to load. 

Are your micro / mini indicators flashing incorrectly?

In many cases, after fitting micro / mini indicators, you will find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Are your led micro / mini indicators flashing incorrectly?

In many cases, after fitting micro / mini indicators, you may find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.

Note: We highly recommend buying this product when purchasing LED micro / mini indicators in order to save any disappointment when fitting.

NO wire cutting or soldering is required, these resistors fit inline.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Racing Cap.

As seen on the BSB Grid along with our Umbrella.

Available in Black with gold or silver trims.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Take care of your helmet with our R&G Racing Deluxe Helmet Bag!

Made from a tough, hard-wearing outer and fleece lining, this universal helmet bag protects against dust and light knocks.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Been there, done that? Now you can have the T-shirt!

Available in Blue or Black.

With R&G Slogans:
"Slip it, slide it, pick it up and ride it..."
or
"Whenever I ride, I use protection...".

Available in Small, Medium, Large or Extra Large.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Racing Umbrella in silver and black with R&G Logo.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our revolutionary tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike. ** Part does not include Ratchet Straps ** R&G Racing Handlebar Top Straps ST0001BL R&G Racing Handlebar Top Straps, 25mm Ratchet Straps, RG, R&G Racing, bike parts, motorbike supplies

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our revolutionary 25mm tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike. Individual ratchet strap length: 72" (180cm) ** Part does not include top-strap ** 25mm Ratchet Straps ST0699 25mm Ratchet Straps ST0699

  
NB. 3D Products and Installation Guides may take a moment to load. 

Protect your fuel tank from scratches and unwanted marks from zippers/buckles and general wear and tear with our newly developed traditional style tank pad.

Available in Black.

  
NB. 3D Products and Installation Guides may take a moment to load. 

New for 2012 comes our Visor Pouch/Protector, compatible with all major brand visors. Ideal for carrying a spare clear visor for when it gets dark or vice versa. Equipped with a high-quality fastex buckle and belt (expandable up to 48 inches) and features a fleece-lined interior to keep your visor in best condition - coupled with a large Velcro closing tab, making the visor easy to get out when needed and ensuring it stays safe and secure when not.

Comes with reflective "R&G" logo and text to help aid visibility.

Available only in Black.(Visor not included!)

  
NB. 3D Products and Installation Guides may take a moment to load. 

Give your visor that racing look as used by many R&G supported riders in BSB and around the world.

Supplied as a pair.

  
NB. 3D Products and Installation Guides may take a moment to load.