These crash protectors fit the CBF1000 ('06 - '10) and CBF 1000 ABS ('06 - '10).

    
NB. 3D Products and Installation Guides may take a moment to load. 

Completely enclosing the motorcycles rear shock absorber and spring, Shocktube prevents damage from road salt, water spray, stone chipping, dust and dirt.

Patent No: GB2459728

    
NB. 3D Products and Installation Guides may take a moment to load. 

These crash protectors fit the CBF1000 and CBF 1000 ABS.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Suitable for the Yoshimura R-77 exhaust.

  
NB. 3D Products and Installation Guides may take a moment to load. 

These fork protectors are suitable for the Honda CBF 1000 GT and ABS models of all years

    
NB. 3D Products and Installation Guides may take a moment to load. 

Licence plate adapters to suit US style plates (amongst others), once installed enable a certain amount of flexibility when fitting the a number plate, replacing the need to redrill your number plate.

Available in 2 sizes. 0.75 inch or 1 inch extensions.


Supplied in pairs.

NO TAIL TIDY BRACKET IS SUPPLIED WITH THIS KIT

    
NB. 3D Products and Installation Guides may take a moment to load. 

Brand new for 2012. Our Elevation series Paddock Stands are modular for easy takedown and transportation yet strong and sturdy when assembled.

This model is a Front Paddock Stand and has specially designed adapters on the arms which hook and slot into the underside of the forks legs.

Made from high quality FE360 tubular steel and powder coated black for a superb crisp finish. Coming supplied with 4 high quality red castors wheels for smooth rolling action and extra stability.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Brand new for 2012. Our Elevation series Paddock Stands are modular for easy takedown and transportation yet strong and sturdy when assembled.

This model is a Rear Paddock Stand and has specially designed hooks and adjustable arms fully compatible with our cotton reels and spindle sliders.

Made from high quality FE360 tubular steel and powder coated black for a superb crisp finish. Coming supplied with 4 high quality red castors wheels for smooth rolling action and extra stability.

  
NB. 3D Products and Installation Guides may take a moment to load. 

The Shocktube is a high-impact, waterproof, vented tube, made from top quality, bonded 100% CR Neoprene™ which is double lined with stretch nylon on both sides.
Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube prevents damage from road salt, water spray, stone chipping, dust and dirt.
The Shocktube can be fitted to most motorcycles with either monoshock or twin shock systems quickly, without the need to remove the shock absorber!
It continually protects the rear shock absorber and spring, while still maintaining the condition of the shock for a substantially extended period of time, throughout the life of the motorcycle.

Can't find the right shocktube to fit your bike?
Simply measure your own!
Measuring Instructions

Using a ridged or flexible tape measure,
mark down the the spring length in mm
from the top edge of the pre-load adjuster ring,
to the bottom edge of the lowest part of the spring.
Then.....
using a flexible tape measure, mark down
the circumference in mm of the spring around its
thickest part at the top or bottom of the spring.

Simply contact us by phone or email and we should be able to provide you with the correct fitting Shocktube.

See additional pictures in gallery for assistance.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our Aero Knee Sliders are heavily used all over the world, seen on the best riders, roads and tracks of the planet. They are extensively used by many riders in the British Superbike Championship (amongst others) and race schools worldwide.

Developed with the feedback of racers and road riders alike, many asking for a knee sliders to give them better feel and confidence when leant over. we made our latest generation Aero Knee Sliders, made from a special blend of composite materials to ensure the riders gets the best feedback available.

Attaching to your suit via velcro.

Available in Black or White.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Keep your clutch reservoir protected with our handy Clutch Reservoir Protector (Booty)!

  
NB. 3D Products and Installation Guides may take a moment to load. 

These covers are breathable, soft and elasticated. They can also be spun dry.

Ideal for keeping your pride and joy spotlessly clean over the winter or when put back into indoor after cleaning!

Made from a high quality breathable material that allows the air to constantly travel through.

Available in Black with Silver logo and piping.

    
NB. 3D Products and Installation Guides may take a moment to load. 

The R&G Superbike Outdoor Cover is waterproof and fits on all modern sportsbikes and most dirt bikes and supermotos.

Awarded "Best Buy" by Ride Magazine (Dec '08 issue) this bike cover scored a straight 21/21 points - what more can you ask for!

Available in Black or Silver.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Awarded RiDE magazine Best buy award for 2011.

R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs - heating upto 35°C in only two minutes and max out at 60°C depending on heat setting.

    
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Micro Indicators (turnsignals) designed to be fitted to the rear of your motorbike.

Can be used on the front or rear of the bike.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G LED Micro Indicators (turnsignals) are designed to be fitted to the rear of your motorbike. Sold in pairs, they come as standard with both amber and clear lenses.

Can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors. Please see the relevant tail tidy section of our website to find out more.

Note: In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0001 (see related products below)

  
NB. 3D Products and Installation Guides may take a moment to load. 

Are your led micro / mini indicators flashing incorrectly?

In many cases, after fitting micro / mini indicators, you may find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.

Note: We highly recommend buying this product when purchasing LED micro / mini indicators in order to save any disappointment when fitting.

NO wire cutting or soldering is required, these resistors fit inline.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Racing Cap.

As seen on the BSB Grid along with our Umbrella.

Available in Black with gold or silver trims.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Been there, done that? Now you can have the T-shirt!

Available in Blue or Black.

With R&G Slogans:
"Slip it, slide it, pick it up and ride it..."
or
"Whenever I ride, I use protection...".

Available in Small, Medium, Large or Extra Large.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Racing Umbrella in silver and black with R&G Logo.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our revolutionary tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike. ** Part does not include Ratchet Straps ** R&G Racing Handlebar Top Straps ST0001BL R&G Racing Handlebar Top Straps, 25mm Ratchet Straps, RG, R&G Racing, bike parts, motorbike supplies

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our revolutionary 25mm tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike. Individual ratchet strap length: 72" (180cm) ** Part does not include top-strap ** 25mm Ratchet Straps ST0699 25mm Ratchet Straps ST0699

  
NB. 3D Products and Installation Guides may take a moment to load. 

Protect your fuel tank from scratches and unwanted marks from zippers/buckles and general wear and tear with our newly developed traditional style tank pad.

Available in Black.

  
NB. 3D Products and Installation Guides may take a moment to load. 

New for 2012 comes our Visor Pouch/Protector, compatible with all major brand visors. Ideal for carrying a spare clear visor for when it gets dark or vice versa. Equipped with a high-quality fastex buckle and belt (expandable up to 48 inches) and features a fleece-lined interior to keep your visor in best condition - coupled with a large Velcro closing tab, making the visor easy to get out when needed and ensuring it stays safe and secure when not.

Comes with reflective "R&G" logo and text to help aid visibility.

Available only in Black.(Visor not included!)

  
NB. 3D Products and Installation Guides may take a moment to load. 

Give your visor that racing look as used by many R&G supported riders in BSB and around the world.

Supplied as a pair.

  
NB. 3D Products and Installation Guides may take a moment to load.