- Bar End Protectors
- Cotton Reels
- Crash Protectors
- Dust Covers
- Exhaust Protectors
- Exhaust Sliders
- Fork Protectors
- Heated Grips
- Knee Sliders
- Lockstop Savers
- Paddock Stand Bobbins
- Spindle Sliders
- Superbike Outdoor Covers
- Straps
- Swingarm Protectors
- Tail Tidies (License Plate Holders)
- Toe / Chain Guards
back to top ^^
Bar End Sliders
R&G bar-end protectors are made from steel and high-density nylon which are a direct replacement of the original manufactured item. Our range of bar-end sliders is growing fast and they can be fitted in seconds. Should you drop or crash your bike, the end of your bar is likely to be scraped, even if you have been wise enough to have fitted our frame and fairing crash protectors. They are designed not to snap off on impact and produced to protect your bar end and upper fairing/screen in most crash situations.
back to top ^^
Cotton Reels
Cotton reels are oversize paddock stand bobbins, which screw into the paddock stand holes in your swingarm. They offer the dual purpose of protecting your swingarm and enabling the bike to be lifted on a rear stand. Check out our paddock stand hooks, which are compatible with many paddock stands.
back to top ^^
Crash Protectors
We manufacture and market individual, bespoke designs for around 150 different models of motorcycle. Our crash protectors even received an MCN rating of 97%. These are not "mushrooms" and, unlike most competitors, we use de-embrittled high-tensile steel bolts, designed not to snap off on impact. In addition, we insert compression sleeves inside the bobbins, which are designed to scrub speed from crashes quickly and minimize damage to frames and fairings in most crash scenarios.
back to top ^^
Dust Covers
To keep your bike as clean as the day it left the showroom or simply to keep it dry and in pristine condition as you left it over the winter months instead of gathering unnecessary dust in your lockup, then why not use R&G's purpose made sports bike dust cover suitable for all sportsbikes?
back to top ^^
Exhaust Protectors
Should you drop or crash your bike, the base of your end can is likely to be scraped, even if you have been wise enough to have fitted our crash protectors. We have recently launched round can covers and oval can covers, retailing at a fraction of the cost of a replacement end can. The round item is available in three diameters and three colours and is designed to look good and protect your expensive end can in most crash situations.
back to top ^^
Exhaust Sliders
Exhaust Sliders are offered here for the Z 1000, mounting on the exhaust hanger and protecting the expensive cans by means of our classic crash protector technology.
back to top ^^
Fork Protectors
Coming from off-road technology, our range of fork protectors is growing fast and they can be fitted in seconds. They will not only save you money by helping to protect expensive fork legs and callipers in the event of a spill, but they will also give you that authentic factory look!
back to top ^^
Heated Grips
Heated grips add months to your motorcycling season and comfort to almost any ride. For the last few years, our friend Bruce had taken his ZX9-R off the road during the winter months. Since using our new range of R&G heated grips, Bruce looks forward to any dry day where the sun is bright and where the cold will no longer be a concern. (Product found in our General Accessories section)
back to top ^^
Knee Sliders
R&G knee sliders are offered in a medium compound and are ergonomically designed for maximum comfort, by means of a unique shaping against the knee. They are interchangeable for maximum use. As used and tested by many racers and the California Superbike School. (Product found in our General Accessories section)
back to top ^^
Lockstop Savers
Crash your bike or go into a mega tank slapper and you could break off the lockstops on the bottom of your bike's yoke. This can not only damage the bike's frame but it also indicates to a potential buyer that the bike has had a heavy fall. These Lockstop Savers touch the top of the bike's forks just before the lockstop would have hit the bike's frame, thus limiting damage.
back to top ^^
Paddock Stand Bobbins
Available in silver, gold, blue, black and red (also green for M10 size), these handy little anodised aluminium items fit most modern sports bikes. They look "trick" and enable quick and easy use of professional paddock (racing) stands.
back to top ^^
Spindle Sliders
Rear spindle sliders not only protect your swingarm in the event of a slide, but they can also be used in order to lift your bike, using our paddock stand hooks and a compatible paddock stand. They can be fitted in seconds, using the stainless steel bar and locknuts supplied.
back to top ^^
Superbike Outdoor Covers
The R&G Superbike Outdoor Cover is waterproof and fits on all modern sportsbikes and most dirt bikes and supermotos and will protect your bike from the elements when it is parked outside. The cover has an extra soft lining in the top section for added fuel tank protection. The cover features holes at the foot of both wheels, so that security chains can be looped through easily. The cover also features clips underneath, in two positions, for added security and to stop the wind getting underneath and creating billowing.
back to top ^^
Straps
Our revolutionary handlebar top strap tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike.
back to top ^^
Swingarm Protectors
Swingarm protectors are fitted by means of a stainless steel bar passing through the rear spindle (except code SP0001). They can be fitted in seconds and are designed to help save your swingarm in the event of a crash.
back to top ^^
Tail Tidies (License Plate Holders)
As used at Performance Bikes and MCN, the R&G Licence Plate Holder is made from lightweight aluminium and replaces the very large, original plastic licence plate holder. The licence plate holder comes with all necessary holes drilled and, where necessary, it comes with a neat little built-in licence plate light and optional red reflective tape.
back to top ^^
Toe / Chain Guards
Toe guards, otherwise known in the trade as "shark's fins", are a compulsory item for professional racers, following several grim incidents involving missing toes. Ours are World Superbike replicas, and are used by many top riders. They are a must for track day enthusiasts (they're likely to be mandatory soon) and anybody else who values his or her pinkies. They look good, can be fitted in five minutes and are available in ABS or aluminium.
|
