Maximise your potential, tune your machine to your exact requirements. R&G Racing Ducati 848, 1098 and 1198 Adjustable Rearsets are milled out of lightweight aluminium for high strength and durability. R&G adjustable rearsets provide the option to assemble with racing shift-pattern(1 up - 5 down) or road setup as standard (1 down - 5 up). Our rearsets provide large adjustments and exact positioning to suit every rider (11 positions). Designed to be easily installed. Powdercoated in black with crisp white R&G graphics on the peg and levers, giving these rearsets a very sharp look. The footrests are specially textured to ensure maximum grip in even the most tricky situations. Full fitting kit, including instructions, enclosed. Designed specifically for the Ducati 848, 1098 and 1198 (not compatible with '11 1198).

These crash protectors are suitable for the Ducati 848 & 1098S and feature our stylish, aerodynamic Aero Bobbin.

R&G Aero Bobbins are a stylish, aerodynamic, teardrop shaped bobbin improving on the original good looks of our highly successful and popular standard round bobbins. Fitted with a removable end cap which hides the bobbins fittings, this sleek new design looks superb and is a winner on road and track!

      
NB. 3D Products and Installation Guides may take a moment to load. 

Suitable for the Ducati 848Our industry leading engine case covers are now available in kit form containing all the engine case covers R&G offer for your bike in one go. Developed on track and brought to the road our engine case covers are made..

WET CLUTCH COVER - Right Hand Side for the Ducati 848, Hypermotard 796, Monster 696, MTS Multistrada 1100, Monster 1100 Evo and the ST3 motorbikes.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Left hand side water pump cover to fit the Ducati Multistrada 1200, Streetfighter (1098), 848, 1098 and 1198.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Completely enclosing the motorcycles rear shock absorber and spring, Shocktube prevents damage from road salt, water spray, stone chipping, dust and dirt.

Patent No: GB2459728

    
NB. 3D Products and Installation Guides may take a moment to load. 

Tidy up your rear end with this R&G Tail Tidy/Licence Plate Holder!

Suitable for the Ducati 848 & 1098S, this tail tidy incorporates our replacement tail tidy number plate light. This product also includes micro indicators which might require the fitting of RGR0001 resistors.

    
NB. 3D Products and Installation Guides may take a moment to load. 

This Tank Slider kit is compatible with the Ducati 848/1098/1198 (All years).

As used by the California Superbike School. (http://www.superbikeschool.com/)

Our Tank Sliders are made from Carbon fibre which is Kevlar reinforced, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tank, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.

Application takes only minutes and they could save you having to replace your tank which can get dented or scratched in the event of a crash.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Suitable for the Yoshimura R-77 exhaust.

  
NB. 3D Products and Installation Guides may take a moment to load. 

These fork protectors are suitable for the Ducati 848, 1098S, 1198S, & Streetfighter (1098) models help to eliminate damage to the front forks during a drop.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Eliminate that annoying spinning grip by getting a tube of grip glue. Holds grips firmly in place. Helps to reduce arm pump caused by trying to hold spinning grips in place.


Ideally suited to be used when installed R&G Heated Grips.

  
NB. 3D Products and Installation Guides may take a moment to load. 

The Shocktube is a high-impact, waterproof, vented tube, made from top quality, bonded 100% CR Neoprene™ which is double lined with stretch nylon on both sides.
Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube prevents damage from road salt, water spray, stone chipping, dust and dirt.
The Shocktube can be fitted to most motorcycles with either monoshock or twin shock systems quickly, without the need to remove the shock absorber!
It continually protects the rear shock absorber and spring, while still maintaining the condition of the shock for a substantially extended period of time, throughout the life of the motorcycle.

Can't find the right shocktube to fit your bike?
Simply measure your own!
Measuring Instructions

Using a ridged or flexible tape measure,
mark down the the spring length in mm
from the top edge of the pre-load adjuster ring,
to the bottom edge of the lowest part of the spring.
Then.....
using a flexible tape measure, mark down
the circumference in mm of the spring around its
thickest part at the top or bottom of the spring.

Simply contact us by phone or email and we should be able to provide you with the correct fitting Shocktube.

See additional pictures in gallery for assistance.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Spindle sliders for the rear wheel suitable for the Ducati 748, 848, 916, 996, 998, Hypermotard 796, Hypermotard 1100 & Monster S4RS '07- models.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Ducati 1098/1198 and 848 under body frame sliders

  
NB. 3D Products and Installation Guides may take a moment to load. 

High quality holesaw, suitable for modifying your fairing to take the R&G Crash protector kits that require 28mm holes drilled.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Protect your bars with our great little bar end sliders/protectors. Suitable for Renthal bars, LSL bars and for the Ducati 848 '08- and Ducati Diavel (2011-).

  
NB. 3D Products and Installation Guides may take a moment to load. 

These covers are breathable, soft and elasticated. They can also be spun dry.

  
NB. 3D Products and Installation Guides may take a moment to load. 

The R&G Superbike Outdoor Cover is waterproof and fits on all modern sportsbikes and most dirt bikes and supermotos.

Awarded "Best Buy" by Ride Magazine (Dec '08 issue) this bike cover scored a straight 21/21 points - what more can you ask for!

Available in Black or Silver.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Awarded RiDE magazine Best buy award for 2011.

R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs - heating upto 35°C in only two minutes and max out at 60°C depending on heat setting.

    
NB. 3D Products and Installation Guides may take a moment to load. 

These R&G Deluxe leather gloves are reinforced with two layers of leather and two protectors on the palm to prevent damage to your scaphoid bone in the wrist. The thumb and index finger are fitted with a non-slip material, the knuckles are carbon Kevlar with padding and are articulated to improve comfort. The long cuff has a padded bottom and a carbon shield on top to protect the ulna (small raised bone at the top of the wrist). The gloves are secured with a single elasticated Velcro fastening to ensure a snug fit.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our revolutionary tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike.


** Part does not include Ratchet Straps **

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our revolutionary 25mm tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike.

Individual ratchet strap length: 72" (180cm)

** Part does not include top-strap **

  
NB. 3D Products and Installation Guides may take a moment to load. 

Protect your fuel tank from scratches and unwanted marks from zippers/buckles and general wear and tear with our newly developed traditional style tank pad.

Available in Black.

  
NB. 3D Products and Installation Guides may take a moment to load.