Maximise your potential, tune your machine to your exact requirements. R&G Racing Ducati 848, 1098 and 1198 Adjustable Rearsets are milled out of lightweight aluminium for high strength and durability. Our rearsets provide large adjustments and exact positioning to suit every rider (11 positions). Designed to be easily installed. Powdercoated in black with crisp white R&G graphics on the peg and levers, giving these rearsets a very sharp look. The footrests are specially textured to ensure maximum grip in even the most tricky situations. Full fitting kit, including instructions, enclosed. Designed specifically for the Ducati 848, 1098 and 1198 (not compatible with '11 1198).

  
NB. 3D Products and Installation Guides may take a moment to load. 

These crash protectors are suitable for the Ducati 848 & 1098S and feature our stylish, aerodynamic Aero Bobbin.

R&G Aero Bobbins are a stylish, aerodynamic, teardrop shaped bobbin improving on the original good looks of our highly successful and popular standard round bobbins. Fitted with a removable end cap which hides the bobbins fittings, this sleek new design looks superb and is a winner on road and track!

      
NB. 3D Products and Installation Guides may take a moment to load. 

Suitable for the Ducati 848Our industry leading engine case covers are now available in kit form containing all the engine case covers R&G offer for your bike in one go. Developed on track and brought to the road our engine case covers are made...

  
NB. 3D Products and Installation Guides may take a moment to load. 

WET CLUTCH COVER - Right Hand Side for the Ducati 848, Hypermotard 796, MTS Multistrada 1100, Monster 1100 Evo and the ST3 motorbikes.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Left hand side water pump cover to fit the Ducati Multistrada 1200, Streetfighter (1098), 848, 848 Streetfighter, 1098, 1198, Hypermotard 820 / Hyperstrada 820 '13- and many more.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Available in a black finish to fit the Ducati 848/1098/1198 ('07- onwards). This 2 piece radiator guard is made from pressed aluminium and feature a neat, seamless frame (where applicable). They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris.

No permanent modifications need to be made to the bike.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Completely enclosing the motorcycles rear shock absorber and spring, Shocktube prevents damage from road salt, water spray, stone chipping, dust and dirt.

Patent No: GB2459728

    
NB. 3D Products and Installation Guides may take a moment to load. 

Tidy up your rear end with this R&G Tail Tidy/Licence Plate Holder!

Suitable for the Ducati 848 & 1098S, this tail tidy incorporates our replacement tail tidy number plate light. This product also includes micro indicators which might require the fitting of RGR0001 resistors.

    
NB. 3D Products and Installation Guides may take a moment to load. 

This Tank Slider kit is compatible with the Ducati 848/1098/1198 (All years).

As used by the California Superbike School. (http://www.superbikeschool.com/)

Our Tank Sliders are made from Carbon fibre which is Kevlar reinforced, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tank, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.

Application takes only minutes and they could save you having to replace your tank which can get dented or scratched in the event of a crash.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Suitable for the Yoshimura R-77 exhaust.

  
NB. 3D Products and Installation Guides may take a moment to load. 

These fork protectors are suitable for the Ducati 848, 1098S, 1198S, & Streetfighter (1098) models help to eliminate damage to the front forks during a drop.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Eliminate that annoying spinning grip by getting a tube of grip glue. Holds grips firmly in place. Helps to reduce arm pump caused by trying to hold spinning grips in place.


Ideally suited to be used when installed R&G Heated Grips.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Universal Licence plate adapters to suit different number plates hole widths, once installed enable a certain amount of flexibility when fitting the a number plate, replacing the need to redrill your number plate.

Available in a one size fits all.

Supplied in pairs.

NO TAIL TIDY BRACKET IS SUPPLIED WITH THIS KIT

  
NB. 3D Products and Installation Guides may take a moment to load. 

Lose your mirrors for that rebellious look or simply to stop your fairings flapping whilst on track days or racing!

Made from aluminium, these neat little blanking plates fit over the mounting point for the mirrors and can be fitted in seconds. (comes supplied with bolts for installation)

This product is suitable for the Ducati 848, Ducati 1098 and Ducati 1198 (All Years).

  
NB. 3D Products and Installation Guides may take a moment to load. 

Brand new for 2012 - Our Elevation series Paddock Stands

This model is a Rear Paddock Stand is suitable for bikes with a (left hand sided) single sided swing arm and has specially designed adapters (available seperately) to make it compatible with your bike.

Made from high quality FE360 tubular steel and powder coated black for a superb crisp finish. Coming supplied with 4 high quality red castors wheels for smooth rolling action and extra stability.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Brand new for 2012. Our Elevation series Paddock Stands are modular for easy takedown and transportation yet strong and sturdy when assembled.

This model is a Front Paddock Stand and has specially designed adapters on the arms which hook and slot into the underside of the forks legs.

Made from high quality FE360 tubular steel and powder coated black for a superb crisp finish. Coming supplied with 4 high quality red castors wheels for smooth rolling action and extra stability.

  
NB. 3D Products and Installation Guides may take a moment to load. 

The Shocktube is a high-impact, waterproof, vented tube, made from top quality, bonded 100% CR Neoprene™ which is double lined with stretch nylon on both sides.
Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube prevents damage from road salt, water spray, stone chipping, dust and dirt.
The Shocktube can be fitted to most motorcycles with either monoshock or twin shock systems quickly, without the need to remove the shock absorber!
It continually protects the rear shock absorber and spring, while still maintaining the condition of the shock for a substantially extended period of time, throughout the life of the motorcycle.

Can't find the right shocktube to fit your bike?
Simply measure your own!
Measuring Instructions

Using a ridged or flexible tape measure,
mark down the the spring length in mm
from the top edge of the pre-load adjuster ring,
to the bottom edge of the lowest part of the spring.
Then.....
using a flexible tape measure, mark down
the circumference in mm of the spring around its
thickest part at the top or bottom of the spring.

Simply contact us by phone or email and we should be able to provide you with the correct fitting Shocktube.

See additional pictures in gallery for assistance.

  
NB. 3D Products and Installation Guides may take a moment to load. 

This pin kit is suitable for our single sided swingarm paddock stands for bikes with a rear spindle diameter of 21.8mm (ID)

  
NB. 3D Products and Installation Guides may take a moment to load. 

Spindle sliders for the rear wheel suitable for the Ducati 748, 848, 848 Streetfighter, 916, 996, 998, Hypermotard 796, Hypermotard 1100 & Monster S4RS '07- models.

    
NB. 3D Products and Installation Guides may take a moment to load. 

This Tail Slider kit is compatible with the Ducati 848,1098 & 1198.

As used by the California Superbike School. (http://www.superbikeschool.com/)

Our Tail Sliders are made from Carbon fibre which is Kevlar reinforced, offering excellent crash protection and wear resistance. Specially moulded to fit perfectly onto the tail, they are designed to fit onto the most pronounced corners and likely areas to get hit in the event of a crash or drop.

Application takes only minutes and they could save you having to replace your tank which can get dented or scratched in the event of a crash.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Ducati 1098/1198 and 848 under body frame sliders

  
NB. 3D Products and Installation Guides may take a moment to load. 

High quality holesaw, suitable for modifying your fairing to take the R&G Crash protector kits that require 28mm holes drilled.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our Aero Knee Sliders are heavily used all over the world, seen on the best riders, roads and tracks of the planet. They are extensively used by many riders in the British Superbike Championship (amongst others) and race schools worldwide.

Developed with the feedback of racers and road riders alike, many asking for a knee sliders to give them better feel and confidence when leant over. we made our latest generation Aero Knee Sliders, made from a special blend of composite materials to ensure the riders gets the best feedback available.

Attaching to your suit via velcro.

Available in Black or White.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Protect your bars with our great little bar end sliders/protectors. Suitable for Renthal bars, LSL bars and for the Ducati 848 '08- and Ducati Diavel (2011-).

  
NB. 3D Products and Installation Guides may take a moment to load. 

Keep your clutch reservoir protected with our handy Clutch Reservoir Protector (Booty)!

  
NB. 3D Products and Installation Guides may take a moment to load. 

These covers are breathable, soft and elasticated. They can also be spun dry.

Ideal for keeping your pride and joy spotlessly clean over the winter or when put back into indoor after cleaning!

Made from a high quality breathable material that allows the air to constantly travel through.

Available in Black with Silver logo and piping.

    
NB. 3D Products and Installation Guides may take a moment to load. 

The R&G Superbike Outdoor Cover is waterproof and fits on all modern sportsbikes and most dirt bikes and supermotos.

Awarded "Best Buy" by Ride Magazine (Dec '08 issue) this bike cover scored a straight 21/21 points - what more can you ask for!

Available in Black or Silver.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Awarded RiDE magazine Best buy award for 2011.

R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs - heating upto 35°C in only two minutes and max out at 60°C depending on heat setting.

    
NB. 3D Products and Installation Guides may take a moment to load. 

These R&G Deluxe leather gloves are reinforced with two layers of leather and two protectors on the palm to prevent damage to your scaphoid bone in the wrist. The thumb and index finger are fitted with a non-slip material, the knuckles are carbon Kevlar with padding and are articulated to improve comfort. The long cuff has a padded bottom and a carbon shield on top to protect the ulna (small raised bone at the top of the wrist). The gloves are secured with a single elasticated Velcro fastening to ensure a snug fit.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Micro Indicators (turnsignals) designed to be fitted to the rear of your motorbike.

Can be used on the front or rear of the bike.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G LED Micro Indicators (turnsignals) are designed to be fitted to the rear of your motorbike. Sold in pairs, they come as standard with both amber and clear lenses.

Can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors. Please see the relevant tail tidy section of our website to find out more.

Note: In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0001 (see related products below)

  
NB. 3D Products and Installation Guides may take a moment to load. 

Are your led micro / mini indicators flashing incorrectly?

In many cases, after fitting micro / mini indicators, you may find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.

Note: We highly recommend buying this product when purchasing LED micro / mini indicators in order to save any disappointment when fitting.

NO wire cutting or soldering is required, these resistors fit inline.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Racing Cap.

As seen on the BSB Grid along with our Umbrella.

Available in Black with gold or silver trims.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Been there, done that? Now you can have the T-shirt!

Available in Blue or Black.

With R&G Slogans:
"Slip it, slide it, pick it up and ride it..."
or
"Whenever I ride, I use protection...".

Available in Small, Medium, Large or Extra Large.

  
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Racing Umbrella in silver and black with R&G Logo.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our revolutionary tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike. ** Part does not include Ratchet Straps ** R&G Racing Handlebar Top Straps ST0001BL R&G Racing Handlebar Top Straps, 25mm Ratchet Straps, RG, R&G Racing, bike parts, motorbike supplies

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our revolutionary 25mm tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike. Individual ratchet strap length: 72" (180cm) ** Part does not include top-strap ** 25mm Ratchet Straps ST0699 25mm Ratchet Straps ST0699

  
NB. 3D Products and Installation Guides may take a moment to load. 

Protect your fuel tank from scratches and unwanted marks from zippers/buckles and general wear and tear with our newly developed traditional style tank pad.

Available in Black.

  
NB. 3D Products and Installation Guides may take a moment to load. 

New for 2012 comes our Visor Pouch/Protector, compatible with all major brand visors. Ideal for carrying a spare clear visor for when it gets dark or vice versa. Equipped with a high-quality fastex buckle and belt (expandable up to 48 inches) and features a fleece-lined interior to keep your visor in best condition - coupled with a large Velcro closing tab, making the visor easy to get out when needed and ensuring it stays safe and secure when not.

Comes with reflective "R&G" logo and text to help aid visibility.

Available only in Black.(Visor not included!)

  
NB. 3D Products and Installation Guides may take a moment to load. 

Give your visor that racing look as used by many R&G supported riders in BSB and around the world.

Supplied as a pair.

  
NB. 3D Products and Installation Guides may take a moment to load.