These crash protectors are suitable for the BMW K1200R & K1300R models.

    
NB. 3D Products and Installation Guides may take a moment to load. 

These crash protectors are suitable for the BMW K1200R and K1300R models.

    
NB. 3D Products and Installation Guides may take a moment to load. 

These bar end protectors are suitable for the BMW K1200R, K1200s, K1300R and K1300S models

  
NB. 3D Products and Installation Guides may take a moment to load. 

These engine case sliders are suitable for the BMW K1200R, K1200S, K1300R and K1300S models.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Suitable for the Yoshimura R-77 exhaust.

  
NB. 3D Products and Installation Guides may take a moment to load. 

These fork protectors are suitable for the BMW K1200GT, K1200R, K1200S, K1300R and K1300S models.

    
NB. 3D Products and Installation Guides may take a moment to load. 

Eliminate that annoying spinning grip by getting a tube of grip glue. Holds grips firmly in place. Helps to reduce arm pump caused by trying to hold spinning grips in place.


Ideally suited to be used when installed R&G Heated Grips.

  
NB. 3D Products and Installation Guides may take a moment to load. 

The Shocktube is a high-impact, waterproof, vented tube, made from top quality, bonded 100% CR Neoprene™ which is double lined with stretch nylon on both sides.
Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube prevents damage from road salt, water spray, stone chipping, dust and dirt.
The Shocktube can be fitted to most motorcycles with either monoshock or twin shock systems quickly, without the need to remove the shock absorber!
It continually protects the rear shock absorber and spring, while still maintaining the condition of the shock for a substantially extended period of time, throughout the life of the motorcycle.

Can't find the right shocktube to fit your bike?
Simply measure your own!
Measuring Instructions

Using a ridged or flexible tape measure,
mark down the the spring length in mm
from the top edge of the pre-load adjuster ring,
to the bottom edge of the lowest part of the spring.
Then.....
using a flexible tape measure, mark down
the circumference in mm of the spring around its
thickest part at the top or bottom of the spring.

Simply contact us by phone or email and we should be able to provide you with the correct fitting Shocktube.

See additional pictures in gallery for assistance.

  
NB. 3D Products and Installation Guides may take a moment to load. 

These swingarm (shaft) protectors are suitable for the BMW HP2, K1200GT ('06-), K1200/1300R, K1200/1300S, R1200GS & R1200S models.

    
NB. 3D Products and Installation Guides may take a moment to load. 

They protect your knees! What more can we say......

....oh - they are available in black or white!! Now new and improved aero styling too!

  
NB. 3D Products and Installation Guides may take a moment to load. 

Keep your clutch reservoir protected with our handy Clutch Reservoir Protector (Booty)!

  
NB. 3D Products and Installation Guides may take a moment to load. 

These covers are breathable, soft and elasticated. They can also be spun dry.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Awarded RiDE magazine Best buy award for 2011.

R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs - heating upto 35°C in only two minutes and max out at 60°C depending on heat setting.

    
NB. 3D Products and Installation Guides may take a moment to load. 

R&G Micro Indicators (turnsignals) designed to be fitted to the rear of your motorbike.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Are your micro / mini indicators flashing incorrectly?

In many cases, after fitting micro / mini indicators, you will find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Take care of your helmet with our R&G Racing Deluxe Helmet Bag!

Made from a tough, hard-wearing outer and fleece lining, this universal helmet bag protects against dust and light knocks.

  
NB. 3D Products and Installation Guides may take a moment to load. 

The R&G Racing Keyring has a powerful LED light built in with a push & hold button to activate it. The light prevents you from scratching your pride and joy in the dark when your fumbling around looking for that keyhole.

  
NB. 3D Products and Installation Guides may take a moment to load. 

The R&G Racing sew on patch as worn by numerous racers sponsored by R&G Racing is now available for you to buy too!

  
NB. 3D Products and Installation Guides may take a moment to load. 

Stick them on your bike, your car, your garage door, your bedroom wall, your tool box....... Stick them anywhere you like!

This R&G Sticker Sheet consists of 15 individual stickers - ii black and 4 silver.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Been there, done that? Now you can have the T-shirt! Available in Black.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Been there, done that? Now you can have the T-shirt! Available in Blue.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Been there, done that? Now you can have the T-shirt! Available in Black.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Been there, done that? Now you can have the T-shirt! Available in Blue.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our revolutionary tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike.


** Part does not include Ratchet Straps **

  
NB. 3D Products and Installation Guides may take a moment to load. 

Our revolutionary 25mm tie-down system enables you to strap your bike onto your trailer and compress the forks, without scraping top yoke or fairing panels. The top strap features soft padding which passes over the top yoke, as well as handlebar guides, enabling you to route the ratchet straps away from the bike.

Individual ratchet strap length: 72" (180cm)

** Part does not include top-strap **

  
NB. 3D Products and Installation Guides may take a moment to load. 

Replacement tail tidy light for tail tidies supplied with the new style R&G light.
PLEASE NOTE THIS IS THE LIGHT UNIT ONLY AND DOES NOT INCLUDE ANY BRACKETS.

  
NB. 3D Products and Installation Guides may take a moment to load. 

Protect your fuel tank from scratches and unwanted marks from zippers/buckles and general wear and tear with our newly developed traditional style tank pad.

Available in Black.

  
NB. 3D Products and Installation Guides may take a moment to load.